Wala shell

Advanced PHP File Manager

Server IP: 127.0.0.1 | PHP Version: 8.3.30 | Domains Hosted: 54

Name	Size	Last Modified	Actions
📁 ..	-	2026-03-21 15:55
📄 perl.pod =head1 NAME perl - The Perl 5 language interpreter =head1 SYNOPSIS B<perl> S<[ B<-sTtuUWX> ]> S<[ B<-hv> ] [ B<-V>[:I<configvar>] ]> S<[ B<-cw> ] [ B<-d>[B<t>][:I<debugger>] ] [ B<-D>[I<number/list>] ]> S<[ B<-pna> ] [ B<-F>I<pattern> ] [ B<-l>[I<octal>] ] [ B<-0>[I<octal/hexadecimal>] ]> S<[ B<-I>I<dir> ] [ B<-m>[B<->]I<module> ] [ B<-M>[B<->]I<'module...'> ] [ B<-f> ]> S<[ B<-C [I<number/list>] >]> S<[ B<-S> ]> S<[ B<-x>[I<dir>] ]> S<[ B<-i>[I<extension>] ]> S<[ [B<-e>\|B<-E>] I<'command'> ] [ B<--> ] [ I<programfile> ] [ I<argument> ]...> For more information on these options, you can run C<perldoc perlrun>. =head1 GETTING HELP The F<perldoc> program gives you access to all the documentation that comes with Perl. You can get more documentation, tutorials and community support online at L<https://www.perl.org/>. If you're new to Perl, you should start by running C<perldoc perlintro>, which is a general intro for beginners and provides some background to help you navigate the rest of Perl's extensive documentation. Run C<perldoc perldoc> to learn more things you can do with F<perldoc>. For ease of access, the Perl manual has been split up into several sections. =begin buildtoc # This section is parsed by Porting/pod_lib.pl for use by pod/buildtoc etc flag =g perluniprops perlmodlib perlapi perlintern flag =go perltoc flag =ro perlcn perljp perlko perltw flag = perlvms path perlfaq.* cpan/perlfaq/lib/ path perlglossary cpan/perlfaq/lib/ path perlxs(?:tut\|typemap)? dist/ExtUtils-ParseXS/lib/ path perldoc cpan/Pod-Perldoc/ aux h2ph h2xs perlbug pl2pm pod2html pod2man splain xsubpp =end buildtoc =head2 Overview perl Perl overview (this section) perlintro Perl introduction for beginners perlrun Perl execution and options perltoc Perl documentation table of contents =head2 Tutorials perlreftut Perl references short introduction perldsc Perl data structures intro perllol Perl data structures: arrays of arrays perlrequick Perl regular expressions quick start perlretut Perl regular expressions tutorial perlootut Perl OO tutorial for beginners perlperf Perl Performance and Optimization Techniques perlstyle Perl style guide perlcheat Perl cheat sheet perltrap Perl traps for the unwary perldebtut Perl debugging tutorial perlfaq Perl frequently asked questions perlfaq1 General Questions About Perl perlfaq2 Obtaining and Learning about Perl perlfaq3 Programming Tools perlfaq4 Data Manipulation perlfaq5 Files and Formats perlfaq6 Regexes perlfaq7 Perl Language Issues perlfaq8 System Interaction perlfaq9 Networking =head2 Reference Manual perlsyn Perl syntax perldata Perl data structures perlop Perl operators and precedence perlsub Perl subroutines perlfunc Perl built-in functions perlopentut Perl open() tutorial perlpacktut Perl pack() and unpack() tutorial perlpod Perl plain old documentation perlpodspec Perl plain old documentation format specification perlpodstyle Perl POD style guide perldiag Perl diagnostic messages perldeprecation Perl deprecations perllexwarn Perl warnings and their control perldebug Perl debugging perlvar Perl predefined variables perlre Perl regular expressions, the rest of the story perlrebackslash Perl regular expression backslash sequences perlrecharclass Perl regular expression character classes perlreref Perl regular expressions quick reference perlref Perl references, the rest of the story perlform Perl formats perlobj Perl objects perltie Perl objects hidden behind simple variables perldbmfilter Perl DBM filters perlipc Perl interprocess communication perlfork Perl fork() information perlnumber Perl number semantics perlthrtut Perl threads tutorial perlport Perl portability guide perllocale Perl locale support perluniintro Perl Unicode introduction perlunicode Perl Unicode support perlunicook Perl Unicode cookbook perlunifaq Perl Unicode FAQ perluniprops Index of Unicode properties in Perl perlunitut Perl Unicode tutorial perlebcdic Considerations for running Perl on EBCDIC platforms perlsec Perl security perlsecpolicy Perl security report handling policy perlmod Perl modules: how they work perlmodlib Perl modules: how to write and use perlmodstyle Perl modules: how to write modules with style perlmodinstall Perl modules: how to install from CPAN perlnewmod Perl modules: preparing a new module for distribution perlpragma Perl modules: writing a user pragma perlutil utilities packaged with the Perl distribution perlfilter Perl source filters perldtrace Perl's support for DTrace perlglossary Perl Glossary =head2 Internals and C Language Interface perlembed Perl ways to embed perl in your C or C++ application perldebguts Perl debugging guts and tips perlxstut Perl XS tutorial perlxs Perl XS application programming interface perlxstypemap Perl XS C/Perl type conversion tools perlclib Internal replacements for standard C library functions perlguts Perl internal functions for those doing extensions perlcall Perl calling conventions from C perlmroapi Perl method resolution plugin interface perlreapi Perl regular expression plugin interface perlreguts Perl regular expression engine internals perlapi Perl API listing (autogenerated) perlintern Perl internal functions (autogenerated) perliol C API for Perl's implementation of IO in Layers perlapio Perl internal IO abstraction interface perlhack Perl hackers guide perlsource Guide to the Perl source tree perlinterp Overview of the Perl interpreter source and how it works perlhacktut Walk through the creation of a simple C code patch perlhacktips Tips for Perl core C code hacking perlpolicy Perl development policies perlgov Perl Rules of Governance perlgit Using git with the Perl repository =head2 Miscellaneous perlbook Perl book information perlcommunity Perl community information perldoc Look up Perl documentation in Pod format perlhist Perl history records perldelta Perl changes since previous version perl5320delta Perl changes in version 5.32.0 perl5303delta Perl changes in version 5.30.3 perl5302delta Perl changes in version 5.30.2 perl5301delta Perl changes in version 5.30.1 perl5300delta Perl changes in version 5.30.0 perl5283delta Perl changes in version 5.28.3 perl5282delta Perl changes in version 5.28.2 perl5281delta Perl changes in version 5.28.1 perl5280delta Perl changes in version 5.28.0 perl5263delta Perl changes in version 5.26.3 perl5262delta Perl changes in version 5.26.2 perl5261delta Perl changes in version 5.26.1 perl5260delta Perl changes in version 5.26.0 perl5244delta Perl changes in version 5.24.4 perl5243delta Perl changes in version 5.24.3 perl5242delta Perl changes in version 5.24.2 perl5241delta Perl changes in version 5.24.1 perl5240delta Perl changes in version 5.24.0 perl5224delta Perl changes in version 5.22.4 perl5223delta Perl changes in version 5.22.3 perl5222delta Perl changes in version 5.22.2 perl5221delta Perl changes in version 5.22.1 perl5220delta Perl changes in version 5.22.0 perl5203delta Perl changes in version 5.20.3 perl5202delta Perl changes in version 5.20.2 perl5201delta Perl changes in version 5.20.1 perl5200delta Perl changes in version 5.20.0 perl5184delta Perl changes in version 5.18.4 perl5182delta Perl changes in version 5.18.2 perl5181delta Perl changes in version 5.18.1 perl5180delta Perl changes in version 5.18.0 perl5163delta Perl changes in version 5.16.3 perl5162delta Perl changes in version 5.16.2 perl5161delta Perl changes in version 5.16.1 perl5160delta Perl changes in version 5.16.0 perl5144delta Perl changes in version 5.14.4 perl5143delta Perl changes in version 5.14.3 perl5142delta Perl changes in version 5.14.2 perl5141delta Perl changes in version 5.14.1 perl5140delta Perl changes in version 5.14.0 perl5125delta Perl changes in version 5.12.5 perl5124delta Perl changes in version 5.12.4 perl5123delta Perl changes in version 5.12.3 perl5122delta Perl changes in version 5.12.2 perl5121delta Perl changes in version 5.12.1 perl5120delta Perl changes in version 5.12.0 perl5101delta Perl changes in version 5.10.1 perl5100delta Perl changes in version 5.10.0 perl589delta Perl changes in version 5.8.9 perl588delta Perl changes in version 5.8.8 perl587delta Perl changes in version 5.8.7 perl586delta Perl changes in version 5.8.6 perl585delta Perl changes in version 5.8.5 perl584delta Perl changes in version 5.8.4 perl583delta Perl changes in version 5.8.3 perl582delta Perl changes in version 5.8.2 perl581delta Perl changes in version 5.8.1 perl58delta Perl changes in version 5.8.0 perl561delta Perl changes in version 5.6.1 perl56delta Perl changes in version 5.6 perl5005delta Perl changes in version 5.005 perl5004delta Perl changes in version 5.004 perlexperiment A listing of experimental features in Perl perlartistic Perl Artistic License perlgpl GNU General Public License =head2 Language-Specific =for buildtoc flag +r perlcn Perl for Simplified Chinese (in EUC-CN) perljp Perl for Japanese (in EUC-JP) perlko Perl for Korean (in EUC-KR) perltw Perl for Traditional Chinese (in Big5) =head2 Platform-Specific perlaix Perl notes for AIX perlamiga Perl notes for AmigaOS perlandroid Perl notes for Android perlbs2000 Perl notes for POSIX-BC BS2000 perlcygwin Perl notes for Cygwin perldos Perl notes for DOS perlfreebsd Perl notes for FreeBSD perlhaiku Perl notes for Haiku perlhpux Perl notes for HP-UX perlhurd Perl notes for Hurd perlirix Perl notes for Irix perllinux Perl notes for Linux perlmacos Perl notes for Mac OS (Classic) perlmacosx Perl notes for Mac OS X perlnetware Perl notes for NetWare perlopenbsd Perl notes for OpenBSD perlos2 Perl notes for OS/2 perlos390 Perl notes for OS/390 perlos400 Perl notes for OS/400 perlplan9 Perl notes for Plan 9 perlqnx Perl notes for QNX perlriscos Perl notes for RISC OS perlsolaris Perl notes for Solaris perlsymbian Perl notes for Symbian perlsynology Perl notes for Synology perltru64 Perl notes for Tru64 perlvms Perl notes for VMS perlvos Perl notes for Stratus VOS perlwin32 Perl notes for Windows =for buildtoc flag -r =head2 Stubs for Deleted Documents perlboot perlbot perlrepository perltodo perltooc perltoot =for buildtoc __END__ On a Unix-like system, these documentation files will usually also be available as manpages for use with the F<man> program. Some documentation is not available as man pages, so if a cross-reference is not found by man, try it with L<perldoc>. Perldoc can also take you directly to documentation for functions (with the B<-f> switch). See C<perldoc --help> (or C<perldoc perldoc> or C<man perldoc>) for other helpful options L<perldoc> has to offer. In general, if something strange has gone wrong with your program and you're not sure where you should look for help, try making your code comply with B<use strict> and B<use warnings>. These will often point out exactly where the trouble is. =head1 DESCRIPTION Perl officially stands for Practical Extraction and Report Language, except when it doesn't. Perl was originally a language optimized for scanning arbitrary text files, extracting information from those text files, and printing reports based on that information. It quickly became a good language for many system management tasks. Over the years, Perl has grown into a general-purpose programming language. It's widely used for everything from quick "one-liners" to full-scale application development. The language is intended to be practical (easy to use, efficient, complete) rather than beautiful (tiny, elegant, minimal). It combines (in the author's opinion, anyway) some of the best features of B<sed>, B<awk>, and B<sh>, making it familiar and easy to use for Unix users to whip up quick solutions to annoying problems. Its general-purpose programming facilities support procedural, functional, and object-oriented programming paradigms, making Perl a comfortable language for the long haul on major projects, whatever your bent. Perl's roots in text processing haven't been forgotten over the years. It still boasts some of the most powerful regular expressions to be found anywhere, and its support for Unicode text is world-class. It handles all kinds of structured text, too, through an extensive collection of extensions. Those libraries, collected in the CPAN, provide ready-made solutions to an astounding array of problems. When they haven't set the standard themselves, they steal from the best -- just like Perl itself. =head1 AVAILABILITY Perl is available for most operating systems, including virtually all Unix-like platforms. See L<perlport/"Supported Platforms"> for a listing. =head1 ENVIRONMENT See L<perlrun/ENVIRONMENT>. =head1 AUTHOR Larry Wall <larry@wall.org>, with the help of oodles of other folks. If your Perl success stories and testimonials may be of help to others who wish to advocate the use of Perl in their applications, or if you wish to simply express your gratitude to Larry and the Perl developers, please write to perl-thanks@perl.org . =head1 FILES "@INC" locations of perl libraries "@INC" above is a reference to the built-in variable of the same name; see L<perlvar> for more information. =head1 SEE ALSO https://www.perl.org/ the Perl homepage https://www.perl.com/ Perl articles https://www.cpan.org/ the Comprehensive Perl Archive https://www.pm.org/ the Perl Mongers =head1 DIAGNOSTICS Using the C<use strict> pragma ensures that all variables are properly declared and prevents other misuses of legacy Perl features. The C<use warnings> pragma produces some lovely diagnostics. One can also use the B<-w> flag, but its use is normally discouraged, because it gets applied to all executed Perl code, including that not under your control. See L<perldiag> for explanations of all Perl's diagnostics. The C<use diagnostics> pragma automatically turns Perl's normally terse warnings and errors into these longer forms. Compilation errors will tell you the line number of the error, with an indication of the next token or token type that was to be examined. (In a script passed to Perl via B<-e> switches, each B<-e> is counted as one line.) Setuid scripts have additional constraints that can produce error messages such as "Insecure dependency". See L<perlsec>. Did we mention that you should definitely consider using the B<use warnings> pragma? =head1 BUGS The behavior implied by the B<use warnings> pragma is not mandatory. Perl is at the mercy of your machine's definitions of various operations such as type casting, atof(), and floating-point output with sprintf(). If your stdio requires a seek or eof between reads and writes on a particular stream, so does Perl. (This doesn't apply to sysread() and syswrite().) While none of the built-in data types have any arbitrary size limits (apart from memory size), there are still a few arbitrary limits: a given variable name may not be longer than 251 characters. Line numbers displayed by diagnostics are internally stored as short integers, so they are limited to a maximum of 65535 (higher numbers usually being affected by wraparound). You may submit your bug reports (be sure to include full configuration information as output by the myconfig program in the perl source tree, or by C<perl -V>) to L<https://github.com/Perl/perl5/issues>. Perl actually stands for Pathologically Eclectic Rubbish Lister, but don't tell anyone I said that. =head1 NOTES The Perl motto is "There's more than one way to do it." Divining how many more is left as an exercise to the reader. The three principal virtues of a programmer are Laziness, Impatience, and Hubris. See the Camel Book for why.	16.28 KB	2025-07-28 03:53
📄 perlrun.pod =head1 NAME perlrun - how to execute the Perl interpreter =head1 SYNOPSIS B<perl> S<[ B<-sTtuUWX> ]> S<[ B<-hv> ] [ B<-V>[:I<configvar>] ]> S<[ B<-cw> ] [ B<-d>[B<t>][:I<debugger>] ] [ B<-D>[I<number/list>] ]> S<[ B<-pna> ] [ B<-F>I<pattern> ] [ B<-l>[I<octal>] ] [ B<-0>[I<octal/hexadecimal>] ]> S<[ B<-I>I<dir> ] [ B<-m>[B<->]I<module> ] [ B<-M>[B<->]I<'module...'> ] [ B<-f> ]> S<[ B<-C [I<number/list>] >]> S<[ B<-S> ]> S<[ B<-x>[I<dir>] ]> S<[ B<-i>[I<extension>] ]> S<[ [B<-e>\|B<-E>] I<'command'> ] [ B<--> ] [ I<programfile> ] [ I<argument> ]...> =head1 DESCRIPTION The normal way to run a Perl program is by making it directly executable, or else by passing the name of the source file as an argument on the command line. (An interactive Perl environment is also possible--see L<perldebug> for details on how to do that.) Upon startup, Perl looks for your program in one of the following places: =over 4 =item 1. Specified line by line via L<-e\|/-e commandline> or L<-E\|/-E commandline> switches on the command line. =item 2. Contained in the file specified by the first filename on the command line. (Note that systems supporting the C<#!> notation invoke interpreters this way. See L</Location of Perl>.) =item 3. Passed in implicitly via standard input. This works only if there are no filename arguments--to pass arguments to a STDIN-read program you must explicitly specify a "-" for the program name. =back With methods 2 and 3, Perl starts parsing the input file from the beginning, unless you've specified a L</-x> switch, in which case it scans for the first line starting with C<#!> and containing the word "perl", and starts there instead. This is useful for running a program embedded in a larger message. (In this case you would indicate the end of the program using the C<__END__> token.) The C<#!> line is always examined for switches as the line is being parsed. Thus, if you're on a machine that allows only one argument with the C<#!> line, or worse, doesn't even recognize the C<#!> line, you still can get consistent switch behaviour regardless of how Perl was invoked, even if L</-x> was used to find the beginning of the program. Because historically some operating systems silently chopped off kernel interpretation of the C<#!> line after 32 characters, some switches may be passed in on the command line, and some may not; you could even get a "-" without its letter, if you're not careful. You probably want to make sure that all your switches fall either before or after that 32-character boundary. Most switches don't actually care if they're processed redundantly, but getting a "-" instead of a complete switch could cause Perl to try to execute standard input instead of your program. And a partial L<-I\|/-Idirectory> switch could also cause odd results. Some switches do care if they are processed twice, for instance combinations of L<-l\|/-l[octnum]> and L<-0\|/-0[octalE<sol>hexadecimal]>. Either put all the switches after the 32-character boundary (if applicable), or replace the use of B<-0>I<digits> by C<BEGIN{ $/ = "\0digits"; }>. Parsing of the C<#!> switches starts wherever "perl" is mentioned in the line. The sequences "-" and "- " are specifically ignored so that you could, if you were so inclined, say #!/bin/sh #! -- perl -- -p eval 'exec perl -x -wS $0 ${1+"$@"}' if 0; to let Perl see the L</-p> switch. A similar trick involves the I<env> program, if you have it. #!/usr/bin/env perl The examples above use a relative path to the perl interpreter, getting whatever version is first in the user's path. If you want a specific version of Perl, say, perl5.14.1, you should place that directly in the C<#!> line's path. If the C<#!> line does not contain the word "perl" nor the word "indir", the program named after the C<#!> is executed instead of the Perl interpreter. This is slightly bizarre, but it helps people on machines that don't do C<#!>, because they can tell a program that their SHELL is F</usr/bin/perl>, and Perl will then dispatch the program to the correct interpreter for them. After locating your program, Perl compiles the entire program to an internal form. If there are any compilation errors, execution of the program is not attempted. (This is unlike the typical shell script, which might run part-way through before finding a syntax error.) If the program is syntactically correct, it is executed. If the program runs off the end without hitting an exit() or die() operator, an implicit C<exit(0)> is provided to indicate successful completion. =head2 #! and quoting on non-Unix systems X<hashbang> X<#!> Unix's C<#!> technique can be simulated on other systems: =over 4 =item OS/2 Put extproc perl -S -your_switches as the first line in C<.cmd> file (L</-S> due to a bug in cmd.exe's `extproc' handling). =item MS-DOS Create a batch file to run your program, and codify it in C<ALTERNATE_SHEBANG> (see the F<dosish.h> file in the source distribution for more information). =item Win95/NT The Win95/NT installation, when using the ActiveState installer for Perl, will modify the Registry to associate the F<.pl> extension with the perl interpreter. If you install Perl by other means (including building from the sources), you may have to modify the Registry yourself. Note that this means you can no longer tell the difference between an executable Perl program and a Perl library file. =item VMS Put $ perl -mysw 'f$env("procedure")' 'p1' 'p2' 'p3' 'p4' 'p5' 'p6' 'p7' 'p8' ! $ exit++ + ++$status != 0 and $exit = $status = undef; at the top of your program, where B<-mysw> are any command line switches you want to pass to Perl. You can now invoke the program directly, by saying C<perl program>, or as a DCL procedure, by saying C<@program> (or implicitly via F<DCL$PATH> by just using the name of the program). This incantation is a bit much to remember, but Perl will display it for you if you say C<perl "-V:startperl">. =back Command-interpreters on non-Unix systems have rather different ideas on quoting than Unix shells. You'll need to learn the special characters in your command-interpreter (C<>, C<\> and C<"> are common) and how to protect whitespace and these characters to run one-liners (see L<-e\|/-e commandline> below). On some systems, you may have to change single-quotes to double ones, which you must I<not> do on Unix or Plan 9 systems. You might also have to change a single % to a %%. For example: # Unix perl -e 'print "Hello world\n"' # MS-DOS, etc. perl -e "print \"Hello world\n\"" # VMS perl -e "print ""Hello world\n""" The problem is that none of this is reliable: it depends on the command and it is entirely possible neither works. If I<4DOS> were the command shell, this would probably work better: perl -e "print <Ctrl-x>"Hello world\n<Ctrl-x>"" B<CMD.EXE> in Windows NT slipped a lot of standard Unix functionality in when nobody was looking, but just try to find documentation for its quoting rules. There is no general solution to all of this. It's just a mess. =head2 Location of Perl X<perl, location of interpreter> It may seem obvious to say, but Perl is useful only when users can easily find it. When possible, it's good for both F</usr/bin/perl> and F</usr/local/bin/perl> to be symlinks to the actual binary. If that can't be done, system administrators are strongly encouraged to put (symlinks to) perl and its accompanying utilities into a directory typically found along a user's PATH, or in some other obvious and convenient place. In this documentation, C<#!/usr/bin/perl> on the first line of the program will stand in for whatever method works on your system. You are advised to use a specific path if you care about a specific version. #!/usr/local/bin/perl5.14 or if you just want to be running at least version, place a statement like this at the top of your program: use 5.014; =head2 Command Switches X<perl, command switches> X<command switches> As with all standard commands, a single-character switch may be clustered with the following switch, if any. #!/usr/bin/perl -spi.orig # same as -s -p -i.orig A C<--> signals the end of options and disables further option processing. Any arguments after the C<--> are treated as filenames and arguments. Switches include: =over 5 =item B<-0>[I<octal/hexadecimal>] X<-0> X<$/> specifies the input record separator (C<$/>) as an octal or hexadecimal number. If there are no digits, the null character is the separator. Other switches may precede or follow the digits. For example, if you have a version of I<find> which can print filenames terminated by the null character, you can say this: find . -name '.orig' -print0 \| perl -n0e unlink The special value 00 will cause Perl to slurp files in paragraph mode. Any value 0400 or above will cause Perl to slurp files whole, but by convention the value 0777 is the one normally used for this purpose. You can also specify the separator character using hexadecimal notation: B<-0xI<HHH...>>, where the C<I<H>> are valid hexadecimal digits. Unlike the octal form, this one may be used to specify any Unicode character, even those beyond 0xFF. So if you I<really> want a record separator of 0777, specify it as B<-0x1FF>. (This means that you cannot use the L</-x> option with a directory name that consists of hexadecimal digits, or else Perl will think you have specified a hex number to B<-0>.) =item B<-a> X<-a> X<autosplit> turns on autosplit mode when used with a L</-n> or L</-p>. An implicit split command to the @F array is done as the first thing inside the implicit while loop produced by the L</-n> or L</-p>. perl -ane 'print pop(@F), "\n";' is equivalent to while (<>) { @F = split(' '); print pop(@F), "\n"; } An alternate delimiter may be specified using L<-F\|/-Fpattern>. B<-a> implicitly sets L</-n>. =item B<-C [I<number/list>]> X<-C> The B<-C> flag controls some of the Perl Unicode features. As of 5.8.1, the B<-C> can be followed either by a number or a list of option letters. The letters, their numeric values, and effects are as follows; listing the letters is equal to summing the numbers. I 1 STDIN is assumed to be in UTF-8 O 2 STDOUT will be in UTF-8 E 4 STDERR will be in UTF-8 S 7 I + O + E i 8 UTF-8 is the default PerlIO layer for input streams o 16 UTF-8 is the default PerlIO layer for output streams D 24 i + o A 32 the @ARGV elements are expected to be strings encoded in UTF-8 L 64 normally the "IOEioA" are unconditional, the L makes them conditional on the locale environment variables (the LC_ALL, LC_CTYPE, and LANG, in the order of decreasing precedence) -- if the variables indicate UTF-8, then the selected "IOEioA" are in effect a 256 Set ${^UTF8CACHE} to -1, to run the UTF-8 caching code in debugging mode. =for documenting_the_underdocumented perl.h gives W/128 as PERL_UNICODE_WIDESYSCALLS "/* for Sarathy /" =for todo perltodo mentions Unicode in %ENV and filenames. I guess that these will be options e and f (or F). For example, B<-COE> and B<-C6> will both turn on UTF-8-ness on both STDOUT and STDERR. Repeating letters is just redundant, not cumulative nor toggling. The C<io> options mean that any subsequent open() (or similar I/O operations) in main program scope will have the C<:utf8> PerlIO layer implicitly applied to them, in other words, UTF-8 is expected from any input stream, and UTF-8 is produced to any output stream. This is just the default set via L<C<${^OPEN}>\|perlvar/${^OPEN}>, with explicit layers in open() and with binmode() one can manipulate streams as usual. This has no effect on code run in modules. B<-C> on its own (not followed by any number or option list), or the empty string C<""> for the L</PERL_UNICODE> environment variable, has the same effect as B<-CSDL>. In other words, the standard I/O handles and the default C<open()> layer are UTF-8-fied I<but> only if the locale environment variables indicate a UTF-8 locale. This behaviour follows the I<implicit> (and problematic) UTF-8 behaviour of Perl 5.8.0. (See L<perl581delta/UTF-8 no longer default under UTF-8 locales>.) You can use B<-C0> (or C<"0"> for C<PERL_UNICODE>) to explicitly disable all the above Unicode features. The read-only magic variable C<${^UNICODE}> reflects the numeric value of this setting. This variable is set during Perl startup and is thereafter read-only. If you want runtime effects, use the three-arg open() (see L<perlfunc/open>), the two-arg binmode() (see L<perlfunc/binmode>), and the C<open> pragma (see L<open>). (In Perls earlier than 5.8.1 the B<-C> switch was a Win32-only switch that enabled the use of Unicode-aware "wide system call" Win32 APIs. This feature was practically unused, however, and the command line switch was therefore "recycled".) B<Note:> Since perl 5.10.1, if the B<-C> option is used on the C<#!> line, it must be specified on the command line as well, since the standard streams are already set up at this point in the execution of the perl interpreter. You can also use binmode() to set the encoding of an I/O stream. =item B<-c> X<-c> causes Perl to check the syntax of the program and then exit without executing it. Actually, it I<will> execute any C<BEGIN>, C<UNITCHECK>, or C<CHECK> blocks and any C<use> statements: these are considered as occurring outside the execution of your program. C<INIT> and C<END> blocks, however, will be skipped. =item B<-d> X<-d> X<-dt> =item B<-dt> runs the program under the Perl debugger. See L<perldebug>. If B<t> is specified, it indicates to the debugger that threads will be used in the code being debugged. =item B<-d:>I<MOD[=bar,baz]> X<-d> X<-dt> =item B<-dt:>I<MOD[=bar,baz]> runs the program under the control of a debugging, profiling, or tracing module installed as C<Devel::I<MOD>>. E.g., B<-d:DProf> executes the program using the C<Devel::DProf> profiler. As with the L<-M\|/-M[-]module> flag, options may be passed to the C<Devel::I<MOD>> package where they will be received and interpreted by the C<Devel::I<MOD>::import> routine. Again, like B<-M>, use -B<-d:-I<MOD>> to call C<Devel::I<MOD>::unimport> instead of import. The comma-separated list of options must follow a C<=> character. If B<t> is specified, it indicates to the debugger that threads will be used in the code being debugged. See L<perldebug>. =item B<-D>I<letters> X<-D> X<DEBUGGING> X<-DDEBUGGING> =item B<-D>I<number> sets debugging flags. This switch is enabled only if your perl binary has been built with debugging enabled: normal production perls won't have been. For example, to watch how perl executes your program, use B<-Dtls>. Another nice value is B<-Dx>, which lists your compiled syntax tree, and B<-Dr> displays compiled regular expressions; the format of the output is explained in L<perldebguts>. As an alternative, specify a number instead of list of letters (e.g., B<-D14> is equivalent to B<-Dtls>): 1 p Tokenizing and parsing (with v, displays parse stack) 2 s Stack snapshots (with v, displays all stacks) 4 l Context (loop) stack processing 8 t Trace execution 16 o Method and overloading resolution 32 c String/numeric conversions 64 P Print profiling info, source file input state 128 m Memory and SV allocation 256 f Format processing 512 r Regular expression parsing and execution 1024 x Syntax tree dump 2048 u Tainting checks 4096 U Unofficial, User hacking (reserved for private, unreleased use) 16384 X Scratchpad allocation 32768 D Cleaning up 65536 S Op slab allocation 131072 T Tokenizing 262144 R Include reference counts of dumped variables (eg when using -Ds) 524288 J show s,t,P-debug (don't Jump over) on opcodes within package DB 1048576 v Verbose: use in conjunction with other flags to increase the verbosity of the output. Is a no-op on many of the other flags 2097152 C Copy On Write 4194304 A Consistency checks on internal structures 8388608 q quiet - currently only suppresses the "EXECUTING" message 16777216 M trace smart match resolution 33554432 B dump suBroutine definitions, including special Blocks like BEGIN 67108864 L trace Locale-related info; what gets output is very subject to change 134217728 i trace PerlIO layer processing. Set PERLIO_DEBUG to the filename to trace to. 268435456 y trace y///, tr/// compilation and execution All these flags require B<-DDEBUGGING> when you compile the Perl executable (but see C<:opd> in L<Devel::Peek> or L<re/'debug' mode> which may change this). See the F<INSTALL> file in the Perl source distribution for how to do this. If you're just trying to get a print out of each line of Perl code as it executes, the way that C<sh -x> provides for shell scripts, you can't use Perl's B<-D> switch. Instead do this # If you have "env" utility env PERLDB_OPTS="NonStop=1 AutoTrace=1 frame=2" perl -dS program # Bourne shell syntax $ PERLDB_OPTS="NonStop=1 AutoTrace=1 frame=2" perl -dS program # csh syntax % (setenv PERLDB_OPTS "NonStop=1 AutoTrace=1 frame=2"; perl -dS program) See L<perldebug> for details and variations. =item B<-e> I<commandline> X<-e> may be used to enter one line of program. If B<-e> is given, Perl will not look for a filename in the argument list. Multiple B<-e> commands may be given to build up a multi-line script. Make sure to use semicolons where you would in a normal program. =item B<-E> I<commandline> X<-E> behaves just like L<-e\|/-e commandline>, except that it implicitly enables all optional features (in the main compilation unit). See L<feature>. =item B<-f> X<-f> X<sitecustomize> X<sitecustomize.pl> Disable executing F<$Config{sitelib}/sitecustomize.pl> at startup. Perl can be built so that it by default will try to execute F<$Config{sitelib}/sitecustomize.pl> at startup (in a BEGIN block). This is a hook that allows the sysadmin to customize how Perl behaves. It can for instance be used to add entries to the @INC array to make Perl find modules in non-standard locations. Perl actually inserts the following code: BEGIN { do { local $!; -f "$Config{sitelib}/sitecustomize.pl"; } && do "$Config{sitelib}/sitecustomize.pl"; } Since it is an actual C<do> (not a C<require>), F<sitecustomize.pl> doesn't need to return a true value. The code is run in package C<main>, in its own lexical scope. However, if the script dies, C<$@> will not be set. The value of C<$Config{sitelib}> is also determined in C code and not read from C<Config.pm>, which is not loaded. The code is executed I<very> early. For example, any changes made to C<@INC> will show up in the output of `perl -V`. Of course, C<END> blocks will be likewise executed very late. To determine at runtime if this capability has been compiled in your perl, you can check the value of C<$Config{usesitecustomize}>. =item B<-F>I<pattern> X<-F> specifies the pattern to split on for L</-a>. The pattern may be surrounded by C<//>, C<"">, or C<''>, otherwise it will be put in single quotes. You can't use literal whitespace or NUL characters in the pattern. B<-F> implicitly sets both L</-a> and L</-n>. =item B<-h> X<-h> prints a summary of the options. =item B<-i>[I<extension>] X<-i> X<in-place> specifies that files processed by the C<E<lt>E<gt>> construct are to be edited in-place. It does this by renaming the input file, opening the output file by the original name, and selecting that output file as the default for print() statements. The extension, if supplied, is used to modify the name of the old file to make a backup copy, following these rules: If no extension is supplied, and your system supports it, the original I<file> is kept open without a name while the output is redirected to a new file with the original I<filename>. When perl exits, cleanly or not, the original I<file> is unlinked. If the extension doesn't contain a C<>, then it is appended to the end of the current filename as a suffix. If the extension does contain one or more C<> characters, then each C<> is replaced with the current filename. In Perl terms, you could think of this as: ($backup = $extension) =~ s/\/$file_name/g; This allows you to add a prefix to the backup file, instead of (or in addition to) a suffix: $ perl -pi'orig_' -e 's/bar/baz/' fileA # backup to # 'orig_fileA' Or even to place backup copies of the original files into another directory (provided the directory already exists): $ perl -pi'old/.orig' -e 's/bar/baz/' fileA # backup to # 'old/fileA.orig' These sets of one-liners are equivalent: $ perl -pi -e 's/bar/baz/' fileA # overwrite current file $ perl -pi'' -e 's/bar/baz/' fileA # overwrite current file $ perl -pi'.orig' -e 's/bar/baz/' fileA # backup to 'fileA.orig' $ perl -pi'.orig' -e 's/bar/baz/' fileA # backup to 'fileA.orig' From the shell, saying $ perl -p -i.orig -e "s/foo/bar/; ... " is the same as using the program: #!/usr/bin/perl -pi.orig s/foo/bar/; which is equivalent to #!/usr/bin/perl $extension = '.orig'; LINE: while (<>) { if ($ARGV ne $oldargv) { if ($extension !~ /\/) { $backup = $ARGV . $extension; } else { ($backup = $extension) =~ s/\/$ARGV/g; } rename($ARGV, $backup); open(ARGVOUT, ">$ARGV"); select(ARGVOUT); $oldargv = $ARGV; } s/foo/bar/; } continue { print; # this prints to original filename } select(STDOUT); except that the B<-i> form doesn't need to compare $ARGV to $oldargv to know when the filename has changed. It does, however, use ARGVOUT for the selected filehandle. Note that STDOUT is restored as the default output filehandle after the loop. As shown above, Perl creates the backup file whether or not any output is actually changed. So this is just a fancy way to copy files: $ perl -p -i'/some/file/path/' -e 1 file1 file2 file3... or $ perl -p -i'.orig' -e 1 file1 file2 file3... You can use C<eof> without parentheses to locate the end of each input file, in case you want to append to each file, or reset line numbering (see example in L<perlfunc/eof>). If, for a given file, Perl is unable to create the backup file as specified in the extension then it will skip that file and continue on with the next one (if it exists). For a discussion of issues surrounding file permissions and B<-i>, see L<perlfaq5/Why does Perl let me delete read-only files? Why does -i clobber protected files? Isn't this a bug in Perl?>. You cannot use B<-i> to create directories or to strip extensions from files. Perl does not expand C<~> in filenames, which is good, since some folks use it for their backup files: $ perl -pi~ -e 's/foo/bar/' file1 file2 file3... Note that because B<-i> renames or deletes the original file before creating a new file of the same name, Unix-style soft and hard links will not be preserved. Finally, the B<-i> switch does not impede execution when no files are given on the command line. In this case, no backup is made (the original file cannot, of course, be determined) and processing proceeds from STDIN to STDOUT as might be expected. =item B<-I>I<directory> X<-I> X<@INC> Directories specified by B<-I> are prepended to the search path for modules (C<@INC>). =item B<-l>[I<octnum>] X<-l> X<$/> X<$\> enables automatic line-ending processing. It has two separate effects. First, it automatically chomps C<$/> (the input record separator) when used with L</-n> or L</-p>. Second, it assigns C<$\> (the output record separator) to have the value of I<octnum> so that any print statements will have that separator added back on. If I<octnum> is omitted, sets C<$\> to the current value of C<$/>. For instance, to trim lines to 80 columns: perl -lpe 'substr($_, 80) = ""' Note that the assignment C<$\ = $/> is done when the switch is processed, so the input record separator can be different than the output record separator if the B<-l> switch is followed by a L<-0\|/-0[octalE<sol>hexadecimal]> switch: gnufind / -print0 \| perl -ln0e 'print "found $_" if -p' This sets C<$\> to newline and then sets C<$/> to the null character. =item B<-m>[B<->]I<module> X<-m> X<-M> =item B<-M>[B<->]I<module> =item B<-M>[B<->]I<'module ...'> =item B<-[mM]>[B<->]I<module=arg[,arg]...> B<-m>I<module> executes C<use> I<module> C<();> before executing your program. This loads the module, but does not call its C<import> method, so does not import subroutines and does not give effect to a pragma. B<-M>I<module> executes C<use> I<module> C<;> before executing your program. This loads the module and calls its C<import> method, causing the module to have its default effect, typically importing subroutines or giving effect to a pragma. You can use quotes to add extra code after the module name, e.g., C<'-MI<MODULE> qw(foo bar)'>. If the first character after the B<-M> or B<-m> is a dash (B<->) then the 'use' is replaced with 'no'. This makes no difference for B<-m>. A little builtin syntactic sugar means you can also say B<-mI<MODULE>=foo,bar> or B<-MI<MODULE>=foo,bar> as a shortcut for B<'-MI<MODULE> qw(foo bar)'>. This avoids the need to use quotes when importing symbols. The actual code generated by B<-MI<MODULE>=foo,bar> is C<use module split(/,/,q{foo,bar})>. Note that the C<=> form removes the distinction between B<-m> and B<-M>; that is, B<-mI<MODULE>=foo,bar> is the same as B<-MI<MODULE>=foo,bar>. A consequence of the C<split> formulation is that B<-MI<MODULE>=number> never does a version check, unless C<I<MODULE>::import()> itself is set up to do a version check, which could happen for example if I<MODULE> inherits from L<Exporter>. =item B<-n> X<-n> causes Perl to assume the following loop around your program, which makes it iterate over filename arguments somewhat like I<sed -n> or I<awk>: LINE: while (<>) { ... # your program goes here } Note that the lines are not printed by default. See L</-p> to have lines printed. If a file named by an argument cannot be opened for some reason, Perl warns you about it and moves on to the next file. Also note that C<< <> >> passes command line arguments to L<perlfunc/open>, which doesn't necessarily interpret them as file names. See L<perlop> for possible security implications. Here is an efficient way to delete all files that haven't been modified for at least a week: find . -mtime +7 -print \| perl -nle unlink This is faster than using the B<-exec> switch of I<find> because you don't have to start a process on every filename found (but it's not faster than using the B<-delete> switch available in newer versions of I<find>. It does suffer from the bug of mishandling newlines in pathnames, which you can fix if you follow the example under L<-0\|/-0[octalE<sol>hexadecimal]>. C<BEGIN> and C<END> blocks may be used to capture control before or after the implicit program loop, just as in I<awk>. =item B<-p> X<-p> causes Perl to assume the following loop around your program, which makes it iterate over filename arguments somewhat like I<sed>: LINE: while (<>) { ... # your program goes here } continue { print or die "-p destination: $!\n"; } If a file named by an argument cannot be opened for some reason, Perl warns you about it, and moves on to the next file. Note that the lines are printed automatically. An error occurring during printing is treated as fatal. To suppress printing use the L</-n> switch. A B<-p> overrides a B<-n> switch. C<BEGIN> and C<END> blocks may be used to capture control before or after the implicit loop, just as in I<awk>. =item B<-s> X<-s> enables rudimentary switch parsing for switches on the command line after the program name but before any filename arguments (or before an argument of B<-->). Any switch found there is removed from @ARGV and sets the corresponding variable in the Perl program. The following program prints "1" if the program is invoked with a B<-xyz> switch, and "abc" if it is invoked with B<-xyz=abc>. #!/usr/bin/perl -s if ($xyz) { print "$xyz\n" } Do note that a switch like B<--help> creates the variable C<${-help}>, which is not compliant with C<use strict "refs">. Also, when using this option on a script with warnings enabled you may get a lot of spurious "used only once" warnings. =item B<-S> X<-S> makes Perl use the L</PATH> environment variable to search for the program unless the name of the program contains path separators. On some platforms, this also makes Perl append suffixes to the filename while searching for it. For example, on Win32 platforms, the ".bat" and ".cmd" suffixes are appended if a lookup for the original name fails, and if the name does not already end in one of those suffixes. If your Perl was compiled with C<DEBUGGING> turned on, using the L<-Dp\|/-Dletters> switch to Perl shows how the search progresses. Typically this is used to emulate C<#!> startup on platforms that don't support C<#!>. It's also convenient when debugging a script that uses C<#!>, and is thus normally found by the shell's $PATH search mechanism. This example works on many platforms that have a shell compatible with Bourne shell: #!/usr/bin/perl eval 'exec /usr/bin/perl -wS $0 ${1+"$@"}' if $running_under_some_shell; The system ignores the first line and feeds the program to F</bin/sh>, which proceeds to try to execute the Perl program as a shell script. The shell executes the second line as a normal shell command, and thus starts up the Perl interpreter. On some systems $0 doesn't always contain the full pathname, so the L</-S> tells Perl to search for the program if necessary. After Perl locates the program, it parses the lines and ignores them because the variable $running_under_some_shell is never true. If the program will be interpreted by csh, you will need to replace C<${1+"$@"}> with C<$>, even though that doesn't understand embedded spaces (and such) in the argument list. To start up I<sh> rather than I<csh>, some systems may have to replace the C<#!> line with a line containing just a colon, which will be politely ignored by Perl. Other systems can't control that, and need a totally devious construct that will work under any of I<csh>, I<sh>, or Perl, such as the following: eval '(exit $?0)' && eval 'exec perl -wS $0 ${1+"$@"}' & eval 'exec /usr/bin/perl -wS $0 $argv:q' if $running_under_some_shell; If the filename supplied contains directory separators (and so is an absolute or relative pathname), and if that file is not found, platforms that append file extensions will do so and try to look for the file with those extensions added, one by one. On DOS-like platforms, if the program does not contain directory separators, it will first be searched for in the current directory before being searched for on the PATH. On Unix platforms, the program will be searched for strictly on the PATH. =item B<-t> X<-t> Like L</-T>, but taint checks will issue warnings rather than fatal errors. These warnings can now be controlled normally with C<no warnings qw(taint)>. B<Note: This is not a substitute for C<-T>!> This is meant to be used I<only> as a temporary development aid while securing legacy code: for real production code and for new secure code written from scratch, always use the real L</-T>. =item B<-T> X<-T> turns on "taint" so you can test them. Ordinarily these checks are done only when running setuid or setgid. It's a good idea to turn them on explicitly for programs that run on behalf of someone else whom you might not necessarily trust, such as CGI programs or any internet servers you might write in Perl. See L<perlsec> for details. For security reasons, this option must be seen by Perl quite early; usually this means it must appear early on the command line or in the C<#!> line for systems which support that construct. =item B<-u> X<-u> This switch causes Perl to dump core after compiling your program. You can then in theory take this core dump and turn it into an executable file by using the I<undump> program (not supplied). This speeds startup at the expense of some disk space (which you can minimize by stripping the executable). (Still, a "hello world" executable comes out to about 200K on my machine.) If you want to execute a portion of your program before dumping, use the C<CORE::dump()> function instead. Note: availability of I<undump> is platform specific and may not be available for a specific port of Perl. =item B<-U> X<-U> allows Perl to do unsafe operations. Currently the only "unsafe" operations are attempting to unlink directories while running as superuser and running setuid programs with fatal taint checks turned into warnings. Note that warnings must be enabled along with this option to actually I<generate> the taint-check warnings. =item B<-v> X<-v> prints the version and patchlevel of your perl executable. =item B<-V> X<-V> prints summary of the major perl configuration values and the current values of @INC. =item B<-V:>I<configvar> Prints to STDOUT the value of the named configuration variable(s), with multiples when your C<I<configvar>> argument looks like a regex (has non-letters). For example: $ perl -V:libc libc='/lib/libc-2.2.4.so'; $ perl -V:lib. libs='-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc'; libc='/lib/libc-2.2.4.so'; $ perl -V:lib. libpth='/usr/local/lib /lib /usr/lib'; libs='-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc'; lib_ext='.a'; libc='/lib/libc-2.2.4.so'; libperl='libperl.a'; .... Additionally, extra colons can be used to control formatting. A trailing colon suppresses the linefeed and terminator ";", allowing you to embed queries into shell commands. (mnemonic: PATH separator ":".) $ echo "compression-vars: " `perl -V:z.: ` " are here !" compression-vars: zcat='' zip='zip' are here ! A leading colon removes the "name=" part of the response, this allows you to map to the name you need. (mnemonic: empty label) $ echo "goodvfork="`./perl -Ilib -V::usevfork` goodvfork=false; Leading and trailing colons can be used together if you need positional parameter values without the names. Note that in the case below, the C<PERL_API> params are returned in alphabetical order. $ echo building_on `perl -V::osname: -V::PERL_API_.:` now building_on 'linux' '5' '1' '9' now =item B<-w> X<-w> prints warnings about dubious constructs, such as variable names mentioned only once and scalar variables used before being set; redefined subroutines; references to undefined filehandles; filehandles opened read-only that you are attempting to write on; values used as a number that don't I<look> like numbers; using an array as though it were a scalar; if your subroutines recurse more than 100 deep; and innumerable other things. This switch really just enables the global C<$^W> variable; normally, the lexically scoped C<use warnings> pragma is preferred. You can disable or promote into fatal errors specific warnings using C<__WARN__> hooks, as described in L<perlvar> and L<perlfunc/warn>. See also L<perldiag> and L<perltrap>. A fine-grained warning facility is also available if you want to manipulate entire classes of warnings; see L<warnings>. =item B<-W> X<-W> Enables all warnings regardless of C<no warnings> or C<$^W>. See L<warnings>. =item B<-X> X<-X> Disables all warnings regardless of C<use warnings> or C<$^W>. See L<warnings>. Forbidden in L</C<PERL5OPT>>. =item B<-x> X<-x> =item B<-x>I<directory> tells Perl that the program is embedded in a larger chunk of unrelated text, such as in a mail message. Leading garbage will be discarded until the first line that starts with C<#!> and contains the string "perl". Any meaningful switches on that line will be applied. All references to line numbers by the program (warnings, errors, ...) will treat the C<#!> line as the first line. Thus a warning on the 2nd line of the program, which is on the 100th line in the file will be reported as line 2, not as line 100. This can be overridden by using the C<#line> directive. (See L<perlsyn/"Plain Old Comments (Not!)">) If a directory name is specified, Perl will switch to that directory before running the program. The B<-x> switch controls only the disposal of leading garbage. The program must be terminated with C<__END__> if there is trailing garbage to be ignored; the program can process any or all of the trailing garbage via the C<DATA> filehandle if desired. The directory, if specified, must appear immediately following the B<-x> with no intervening whitespace. =back =head1 ENVIRONMENT X<perl, environment variables> =over 12 =item HOME X<HOME> Used if C<chdir> has no argument. =item LOGDIR X<LOGDIR> Used if C<chdir> has no argument and L</HOME> is not set. =item PATH X<PATH> Used in executing subprocesses, and in finding the program if L</-S> is used. =item PERL5LIB X<PERL5LIB> A list of directories in which to look for Perl library files before looking in the standard library. Any architecture-specific and version-specific directories, such as F<version/archname/>, F<version/>, or F<archname/> under the specified locations are automatically included if they exist, with this lookup done at interpreter startup time. In addition, any directories matching the entries in C<$Config{inc_version_list}> are added. (These typically would be for older compatible perl versions installed in the same directory tree.) If PERL5LIB is not defined, L</PERLLIB> is used. Directories are separated (like in PATH) by a colon on Unixish platforms and by a semicolon on Windows (the proper path separator being given by the command C<perl -V:I<path_sep>>). When running taint checks, either because the program was running setuid or setgid, or the L</-T> or L</-t> switch was specified, neither PERL5LIB nor L</PERLLIB> is consulted. The program should instead say: use lib "/my/directory"; =item PERL5OPT X<PERL5OPT> Command-line options (switches). Switches in this variable are treated as if they were on every Perl command line. Only the B<-[CDIMTUWdmtw]> switches are allowed. When running taint checks (either because the program was running setuid or setgid, or because the L</-T> or L</-t> switch was used), this variable is ignored. If PERL5OPT begins with B<-T>, tainting will be enabled and subsequent options ignored. If PERL5OPT begins with B<-t>, tainting will be enabled, a writable dot removed from @INC, and subsequent options honored. =item PERLIO X<PERLIO> A space (or colon) separated list of PerlIO layers. If perl is built to use PerlIO system for IO (the default) these layers affect Perl's IO. It is conventional to start layer names with a colon (for example, C<:perlio>) to emphasize their similarity to variable "attributes". But the code that parses layer specification strings, which is also used to decode the PERLIO environment variable, treats the colon as a separator. An unset or empty PERLIO is equivalent to the default set of layers for your platform; for example, C<:unix:perlio> on Unix-like systems and C<:unix:crlf> on Windows and other DOS-like systems. The list becomes the default for I<all> Perl's IO. Consequently only built-in layers can appear in this list, as external layers (such as C<:encoding()>) need IO in order to load them! See L<"open pragma"\|open> for how to add external encodings as defaults. Layers it makes sense to include in the PERLIO environment variable are briefly summarized below. For more details see L<PerlIO>. =over 8 =item :crlf X<:crlf> A layer which does CRLF to C<"\n"> translation distinguishing "text" and "binary" files in the manner of MS-DOS and similar operating systems, and also provides buffering similar to C<:perlio> on these architectures. =item :perlio X<:perlio> This is a re-implementation of stdio-like buffering written as a PerlIO layer. As such it will call whatever layer is below it for its operations, typically C<:unix>. =item :stdio X<:stdio> This layer provides a PerlIO interface by wrapping system's ANSI C "stdio" library calls. The layer provides both buffering and IO. Note that the C<:stdio> layer does I<not> do CRLF translation even if that is the platform's normal behaviour. You will need a C<:crlf> layer above it to do that. =item :unix X<:unix> Low-level layer that calls C<read>, C<write>, C<lseek>, etc. =item :win32 X<:win32> On Win32 platforms this I<experimental> layer uses native "handle" IO rather than a Unix-like numeric file descriptor layer. Known to be buggy in this release (5.30). =back The default set of layers should give acceptable results on all platforms. For Unix platforms that will be the equivalent of ":unix:perlio" or ":stdio". Configure is set up to prefer the ":stdio" implementation if the system's library provides for fast access to the buffer (not common on modern architectures); otherwise, it uses the ":unix:perlio" implementation. On Win32 the default in this release (5.30) is ":unix:crlf". Win32's ":stdio" has a number of bugs/mis-features for Perl IO which are somewhat depending on the version and vendor of the C compiler. Using our own C<:crlf> layer as the buffer avoids those issues and makes things more uniform. This release (5.30) uses C<:unix> as the bottom layer on Win32, and so still uses the C compiler's numeric file descriptor routines. There is an experimental native C<:win32> layer, which is expected to be enhanced and may eventually become the default under Win32. The PERLIO environment variable is completely ignored when Perl is run in taint mode. =item PERLIO_DEBUG X<PERLIO_DEBUG> If set to the name of a file or device when Perl is run with the L<-Di\|/-Dletters> command-line switch, the logging of certain operations of the PerlIO subsystem will be redirected to the specified file rather than going to stderr, which is the default. The file is opened in append mode. Typical uses are in Unix: % env PERLIO_DEBUG=/tmp/perlio.log perl -Di script ... and under Win32, the approximately equivalent: > set PERLIO_DEBUG=CON perl -Di script ... This functionality is disabled for setuid scripts, for scripts run with L</-T>, and for scripts run on a Perl built without C<-DDEBUGGING> support. =item PERLLIB X<PERLLIB> A list of directories in which to look for Perl library files before looking in the standard library. If L</PERL5LIB> is defined, PERLLIB is not used. The PERLLIB environment variable is completely ignored when Perl is run in taint mode. =item PERL5DB X<PERL5DB> The command used to load the debugger code. The default is: BEGIN { require "perl5db.pl" } The PERL5DB environment variable is only used when Perl is started with a bare L</-d> switch. =item PERL5DB_THREADED X<PERL5DB_THREADED> If set to a true value, indicates to the debugger that the code being debugged uses threads. =item PERL5SHELL (specific to the Win32 port) X<PERL5SHELL> On Win32 ports only, may be set to an alternative shell that Perl must use internally for executing "backtick" commands or system(). Default is C<cmd.exe /x/d/c> on WindowsNT and C<command.com /c> on Windows95. The value is considered space-separated. Precede any character that needs to be protected, like a space or backslash, with another backslash. Note that Perl doesn't use COMSPEC for this purpose because COMSPEC has a high degree of variability among users, leading to portability concerns. Besides, Perl can use a shell that may not be fit for interactive use, and setting COMSPEC to such a shell may interfere with the proper functioning of other programs (which usually look in COMSPEC to find a shell fit for interactive use). Before Perl 5.10.0 and 5.8.8, PERL5SHELL was not taint checked when running external commands. It is recommended that you explicitly set (or delete) C<$ENV{PERL5SHELL}> when running in taint mode under Windows. =item PERL_ALLOW_NON_IFS_LSP (specific to the Win32 port) X<PERL_ALLOW_NON_IFS_LSP> Set to 1 to allow the use of non-IFS compatible LSPs (Layered Service Providers). Perl normally searches for an IFS-compatible LSP because this is required for its emulation of Windows sockets as real filehandles. However, this may cause problems if you have a firewall such as I<McAfee Guardian>, which requires that all applications use its LSP but which is not IFS-compatible, because clearly Perl will normally avoid using such an LSP. Setting this environment variable to 1 means that Perl will simply use the first suitable LSP enumerated in the catalog, which keeps I<McAfee Guardian> happy--and in that particular case Perl still works too because I<McAfee Guardian>'s LSP actually plays other games which allow applications requiring IFS compatibility to work. =item PERL_DEBUG_MSTATS X<PERL_DEBUG_MSTATS> Relevant only if Perl is compiled with the C<malloc> included with the Perl distribution; that is, if C<perl -V:d_mymalloc> is "define". If set, this dumps out memory statistics after execution. If set to an integer greater than one, also dumps out memory statistics after compilation. =item PERL_DESTRUCT_LEVEL X<PERL_DESTRUCT_LEVEL> Controls the behaviour of global destruction of objects and other references. See L<perlhacktips/PERL_DESTRUCT_LEVEL> for more information. =item PERL_DL_NONLAZY X<PERL_DL_NONLAZY> Set to C<"1"> to have Perl resolve I<all> undefined symbols when it loads a dynamic library. The default behaviour is to resolve symbols when they are used. Setting this variable is useful during testing of extensions, as it ensures that you get an error on misspelled function names even if the test suite doesn't call them. =item PERL_ENCODING X<PERL_ENCODING> If using the C<use encoding> pragma without an explicit encoding name, the PERL_ENCODING environment variable is consulted for an encoding name. =item PERL_HASH_SEED X<PERL_HASH_SEED> (Since Perl 5.8.1, new semantics in Perl 5.18.0) Used to override the randomization of Perl's internal hash function. The value is expressed in hexadecimal, and may include a leading 0x. Truncated patterns are treated as though they are suffixed with sufficient 0's as required. If the option is provided, and C<PERL_PERTURB_KEYS> is NOT set, then a value of '0' implies C<PERL_PERTURB_KEYS=0> and any other value implies C<PERL_PERTURB_KEYS=2>. B<PLEASE NOTE: The hash seed is sensitive information>. Hashes are randomized to protect against local and remote attacks against Perl code. By manually setting a seed, this protection may be partially or completely lost. See L<perlsec/"Algorithmic Complexity Attacks">, L</PERL_PERTURB_KEYS>, and L</PERL_HASH_SEED_DEBUG> for more information. =item PERL_PERTURB_KEYS X<PERL_PERTURB_KEYS> (Since Perl 5.18.0) Set to C<"0"> or C<"NO"> then traversing keys will be repeatable from run to run for the same C<PERL_HASH_SEED>. Insertion into a hash will not change the order, except to provide for more space in the hash. When combined with setting PERL_HASH_SEED this mode is as close to pre 5.18 behavior as you can get. When set to C<"1"> or C<"RANDOM"> then traversing keys will be randomized. Every time a hash is inserted into the key order will change in a random fashion. The order may not be repeatable in a following program run even if the PERL_HASH_SEED has been specified. This is the default mode for perl. When set to C<"2"> or C<"DETERMINISTIC"> then inserting keys into a hash will cause the key order to change, but in a way that is repeatable from program run to program run. B<NOTE:> Use of this option is considered insecure, and is intended only for debugging non-deterministic behavior in Perl's hash function. Do not use it in production. See L<perlsec/"Algorithmic Complexity Attacks"> and L</PERL_HASH_SEED> and L</PERL_HASH_SEED_DEBUG> for more information. You can get and set the key traversal mask for a specific hash by using the C<hash_traversal_mask()> function from L<Hash::Util>. =item PERL_HASH_SEED_DEBUG X<PERL_HASH_SEED_DEBUG> (Since Perl 5.8.1.) Set to C<"1"> to display (to STDERR) information about the hash function, seed, and what type of key traversal randomization is in effect at the beginning of execution. This, combined with L</PERL_HASH_SEED> and L</PERL_PERTURB_KEYS> is intended to aid in debugging nondeterministic behaviour caused by hash randomization. B<Note> that any information about the hash function, especially the hash seed is B<sensitive information>: by knowing it, one can craft a denial-of-service attack against Perl code, even remotely; see L<perlsec/"Algorithmic Complexity Attacks"> for more information. B<Do not disclose the hash seed> to people who don't need to know it. See also L<C<hash_seed()>\|Hash::Util/hash_seed> and L<C<hash_traversal_mask()>\|Hash::Util/hash_traversal_mask>. An example output might be: HASH_FUNCTION = ONE_AT_A_TIME_HARD HASH_SEED = 0x652e9b9349a7a032 PERTURB_KEYS = 1 (RANDOM) =item PERL_MEM_LOG X<PERL_MEM_LOG> If your Perl was configured with B<-Accflags=-DPERL_MEM_LOG>, setting the environment variable C<PERL_MEM_LOG> enables logging debug messages. The value has the form C<< <I<number>>[m][s][t] >>, where C<I<number>> is the file descriptor number you want to write to (2 is default), and the combination of letters specifies that you want information about (m)emory and/or (s)v, optionally with (t)imestamps. For example, C<PERL_MEM_LOG=1mst> logs all information to stdout. You can write to other opened file descriptors in a variety of ways: $ 3>foo3 PERL_MEM_LOG=3m perl ... =item PERL_ROOT (specific to the VMS port) X<PERL_ROOT> A translation-concealed rooted logical name that contains Perl and the logical device for the @INC path on VMS only. Other logical names that affect Perl on VMS include PERLSHR, PERL_ENV_TABLES, and SYS$TIMEZONE_DIFFERENTIAL, but are optional and discussed further in L<perlvms> and in F<README.vms> in the Perl source distribution. =item PERL_SIGNALS X<PERL_SIGNALS> Available in Perls 5.8.1 and later. If set to C<"unsafe">, the pre-Perl-5.8.0 signal behaviour (which is immediate but unsafe) is restored. If set to C<safe>, then safe (but deferred) signals are used. See L<perlipc/"Deferred Signals (Safe Signals)">. =item PERL_UNICODE X<PERL_UNICODE> Equivalent to the L<-C\|/-C [numberE<sol>list]> command-line switch. Note that this is not a boolean variable. Setting this to C<"1"> is not the right way to "enable Unicode" (whatever that would mean). You can use C<"0"> to "disable Unicode", though (or alternatively unset PERL_UNICODE in your shell before starting Perl). See the description of the L<-C\|/-C [numberE<sol>list]> switch for more information. =item PERL_USE_UNSAFE_INC X<PERL_USE_UNSAFE_INC> If perl has been configured to not have the current directory in L<C<@INC>\|perlvar/@INC> by default, this variable can be set to C<"1"> to reinstate it. It's primarily intended for use while building and testing modules that have not been updated to deal with "." not being in C<@INC> and should not be set in the environment for day-to-day use. =item SYS$LOGIN (specific to the VMS port) X<SYS$LOGIN> Used if chdir has no argument and L</HOME> and L</LOGDIR> are not set. =item PERL_INTERNAL_RAND_SEED X<PERL_INTERNAL_RAND_SEED> Set to a non-negative integer to seed the random number generator used internally by perl for a variety of purposes. Ignored if perl is run setuid or setgid. Used only for some limited startup randomization (hash keys) if C<-T> or C<-t> perl is started with tainting enabled. Perl may be built to ignore this variable. =back Perl also has environment variables that control how Perl handles data specific to particular natural languages; see L<perllocale>. Perl and its various modules and components, including its test frameworks, may sometimes make use of certain other environment variables. Some of these are specific to a particular platform. Please consult the appropriate module documentation and any documentation for your platform (like L<perlsolaris>, L<perllinux>, L<perlmacosx>, L<perlwin32>, etc) for variables peculiar to those specific situations. Perl makes all environment variables available to the program being executed, and passes these along to any child processes it starts. However, programs running setuid would do well to execute the following lines before doing anything else, just to keep people honest: $ENV{PATH} = "/bin:/usr/bin"; # or whatever you need $ENV{SHELL} = "/bin/sh" if exists $ENV{SHELL}; delete @ENV{qw(IFS CDPATH ENV BASH_ENV)}; =head1 ORDER OF APPLICATION Some options, in particular C<-I>, C<-M>, C<PERL5LIB> and C<PERL5OPT> can interact, and the order in which they are applied is important. Note that this section does not document what I<actually> happens inside the perl interpreter, it documents what I<effectively> happens. =over =item -I The effect of multiple C<-I> options is to C<unshift> them onto C<@INC> from right to left. So for example: perl -I 1 -I 2 -I 3 will first prepend C<3> onto the front of C<@INC>, then prepend C<2>, and then prepend C<1>. The result is that C<@INC> begins with: qw(1 2 3) =item -M Multiple C<-M> options are processed from left to right. So this: perl -Mlib=1 -Mlib=2 -Mlib=3 will first use the L<lib> pragma to prepend C<1> to C<@INC>, then it will prepend C<2>, then it will prepend C<3>, resulting in an C<@INC> that begins with: qw(3 2 1) =item the PERL5LIB environment variable This contains a list of directories, separated by colons. The entire list is prepended to C<@INC> in one go. This: PERL5LIB=1:2:3 perl will result in an C<@INC> that begins with: qw(1 2 3) =item combinations of -I, -M and PERL5LIB C<PERL5LIB> is applied first, then all the C<-I> arguments, then all the C<-M> arguments. This: PERL5LIB=e1:e2 perl -I i1 -Mlib=m1 -I i2 -Mlib=m2 will result in an C<@INC> that begins with: qw(m2 m1 i1 i2 e1 e2) =item the PERL5OPT environment variable This contains a space separated list of switches. We only consider the effects of C<-M> and C<-I> in this section. After normal processing of C<-I> switches from the command line, all the C<-I> switches in C<PERL5OPT> are extracted. They are processed from left to right instead of from right to left. Also note that while whitespace is allowed between a C<-I> and its directory on the command line, it is not allowed in C<PERL5OPT>. After normal processing of C<-M> switches from the command line, all the C<-M> switches in C<PERL5OPT> are extracted. They are processed from left to right, I<i.e.> the same as those on the command line. An example may make this clearer: export PERL5OPT="-Mlib=optm1 -Iopti1 -Mlib=optm2 -Iopti2" export PERL5LIB=e1:e2 perl -I i1 -Mlib=m1 -I i2 -Mlib=m2 will result in an C<@INC> that begins with: qw( optm2 optm1 m2 m1 opti2 opti1 i1 i2 e1 e2 ) =item Other complications There are some complications that are ignored in the examples above: =over =item arch and version subdirs All of C<-I>, C<PERL5LIB> and C<use lib> will also prepend arch and version subdirs if they are present =item sitecustomize.pl =back =back	54.67 KB	2025-07-28 03:53

Terminal