Wala shell

Advanced PHP File Manager

Server IP: 127.0.0.1 | PHP Version: 8.3.30 | Domains Hosted: 54

Name	Size	Last Modified
📁 ..	-	2025-05-25 12:36
📄 check.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 2001-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. am__tty_colors_dummy = \ mgn= red= grn= lgn= blu= brg= std=; \ am__color_tests=no am__tty_colors = { \ $(am__tty_colors_dummy); \ if test "X$(AM_COLOR_TESTS)" = Xno; then \ am__color_tests=no; \ elif test "X$(AM_COLOR_TESTS)" = Xalways; then \ am__color_tests=yes; \ ## If stdout is a non-dumb tty, use colors. If test -t is not supported, ## then this check fails; a conservative approach. Of course do not ## redirect stdout here, just stderr. elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \ am__color_tests=yes; \ fi; \ if test $$am__color_tests = yes; then \ red='[0;31m'; \ grn='[0;32m'; \ lgn='[1;32m'; \ blu='[1;34m'; \ mgn='[0;35m'; \ brg='[1m'; \ std='[m'; \ fi; \ } .PHONY: check-TESTS if !%?SERIAL_TESTS% include inst-vars.am ## New parallel test driver. ## ## The first version of the code here was adapted from check.mk, which was ## originally written at EPITA/LRDE, further developed at Gostai, then made ## its way from GNU coreutils to end up, largely rewritten, in Automake. ## The current version is an heavy rewrite of that, to allow for support ## of more test metadata, and the use of custom test drivers and protocols ## (among them, TAP). am__recheck_rx = ^[ ]:recheck:[ ] am__global_test_result_rx = ^[ ]:global-test-result:[ ] am__copy_in_global_log_rx = ^[ ]:copy-in-global-log:[ ] # A command that, given a newline-separated list of test names on the # standard input, print the name of the tests that are to be re-run # upon "make recheck". am__list_recheck_tests = $(AWK) '{ \ ## By default, we assume the test is to be re-run. recheck = 1; \ while ((rc = (getline line < ($$0 ".trs"))) != 0) \ { \ if (rc < 0) \ { \ ## If we've encountered an I/O error here, there are three possibilities: ## ## [1] The '.log' file exists, but the '.trs' does not; in this case, ## we "gracefully" recover by assuming the corresponding test is ## to be re-run (which will re-create the missing '.trs' file). ## ## [2] Both the '.log' and '.trs' files are missing; this means that ## the corresponding test has not been run, and is thus not to ## be re-run. ## ## [3] We have encountered some corner-case problem (e.g., a '.log' or ## '.trs' files somehow made unreadable, or issues with a bad NFS ## connection, or whatever); we don't handle such corner cases. ## if ((getline line2 < ($$0 ".log")) < 0) \ recheck = 0; \ break; \ } \ else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \ ## A directive explicitly specifying the test is not to be re-run. { \ recheck = 0; \ break; \ } \ else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \ { \ ## A directive explicitly specifying the test is to be re-run. break; \ } \ ## else continue with the next iteration. }; \ if (recheck) \ print $$0; \ ## Don't leak open file descriptors, as this could cause serious ## problems when there are many tests (yes, even on Linux). close ($$0 ".trs"); \ close ($$0 ".log"); \ }' # A command that, given a newline-separated list of test names on the # standard input, create the global log from their .trs and .log files. am__create_global_log = $(AWK) ' \ function fatal(msg) \ { \ print "fatal: making $@: " msg \| "cat >&2"; \ exit 1; \ } \ function rst_section(header) \ { \ print header; \ len = length(header); \ for (i = 1; i <= len; i = i + 1) \ printf "="; \ printf "\n\n"; \ } \ { \ ## By default, we assume the test log is to be copied in the global log, ## and that its result is simply "RUN" (i.e., we still don't know what ## it outcome was, but we know that at least it has run). copy_in_global_log = 1; \ global_test_result = "RUN"; \ while ((rc = (getline line < ($$0 ".trs"))) != 0) \ { \ if (rc < 0) \ fatal("failed to read from " $$0 ".trs"); \ if (line ~ /$(am__global_test_result_rx)/) \ { \ sub("$(am__global_test_result_rx)", "", line); \ sub("[ ]$$", "", line); \ global_test_result = line; \ } \ else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \ copy_in_global_log = 0; \ }; \ if (copy_in_global_log) \ { \ rst_section(global_test_result ": " $$0); \ while ((rc = (getline line < ($$0 ".log"))) != 0) \ { \ if (rc < 0) \ fatal("failed to read from " $$0 ".log"); \ print line; \ }; \ printf "\n"; \ }; \ ## Don't leak open file descriptors, as this could cause serious ## problems when there are many tests (yes, even on Linux). close ($$0 ".trs"); \ close ($$0 ".log"); \ }' # Restructured Text title. am__rst_title = { sed 's/./ & /;h;s/./=/g;p;x;s/ $$//;p;g' && echo; } # Solaris 10 'make', and several other traditional 'make' implementations, # pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it # by disabling -e (using the XSI extension "set +e") if it's set. am__sh_e_setup = case $$- in e) set +e;; esac # Default flags passed to test drivers. am__common_driver_flags = \ --color-tests "$$am__color_tests" \ --enable-hard-errors "$$am__enable_hard_errors" \ --expect-failure "$$am__expect_failure" # To be inserted before the command running the test. Creates the # directory for the log if needed. Stores in $dir the directory # containing $f, in $tst the test, in $log the log. Executes the # developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and # passes TESTS_ENVIRONMENT. Set up options for the wrapper that # will run the test scripts (or their associated LOG_COMPILER, if # thy have one). am__check_pre = \ $(am__sh_e_setup); \ $(am__vpath_adj_setup) $(am__vpath_adj) \ $(am__tty_colors); \ srcdir=$(srcdir); export srcdir; \ case "$@" in \ /) am__odir=`echo "./$@" \| sed 's\|/[^/]$$\|\|'`;; \ ) am__odir=.;; \ esac; \ test "x$$am__odir" = x"." \|\| test -d "$$am__odir" \ \|\| $(MKDIR_P) "$$am__odir" \|\| exit $$?; \ if test -f "./$$f"; then dir=./; \ elif test -f "$$f"; then dir=; \ else dir="$(srcdir)/"; fi; \ tst=$$dir$$f; log='$@'; \ if test -n '$(DISABLE_HARD_ERRORS)'; then \ am__enable_hard_errors=no; \ else \ am__enable_hard_errors=yes; \ fi; \ ## The use of $dir below is required to account for VPATH ## rewriting done by Sun make. case " $(XFAIL_TESTS) " in \ [\ \ ]$$f[\ \ ]* \| [\ \ ]$$dir$$f[\ \ ]) \ am__expect_failure=yes;; \ ) \ am__expect_failure=no;; \ esac; \ $(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT) # A shell command to get the names of the tests scripts with any registered # extension removed (i.e., equivalently, the names of the test logs, with # the '.log' extension removed). The result is saved in the shell variable # '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly, # we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)", # since that might cause problem with VPATH rewrites for suffix-less tests. # See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'. am__set_TESTS_bases = \ bases='$(TEST_LOGS)'; \ bases=`for i in $$bases; do echo $$i; done \| sed 's/\.log$$//'`; \ ## Trim away any extra whitespace. This has already proved useful ## in avoiding weird bug on lesser make implementations. It also ## works around the GNU make 3.80 bug where trailing whitespace in ## "TESTS = foo.test $(empty)" causes $(TESTS_LOGS) to erroneously ## expand to "foo.log .log". bases=`echo $$bases` # Recover from deleted '.trs' file; this should ensure that # "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create # both 'foo.log' and 'foo.trs'. Break the recipe in two subshells # to avoid problems with "make -n". .log.trs: rm -f $< $@ $(MAKE) $(AM_MAKEFLAGS) $< # Leading 'am--fnord' is there to ensure the list of targets does not # expand to empty, as could happen e.g. with make check TESTS=''. am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck) am--force-recheck: @: $(TEST_SUITE_LOG): $(TEST_LOGS) @$(am__set_TESTS_bases); \ ## Helper shell function, tells whether a path refers to an existing, ## regular, readable file. am__f_ok () { test -f "$$1" && test -r "$$1"; }; \ ## We need to ensures that all the required '.trs' and '.log' files will ## be present and readable. The direct dependencies of $(TEST_SUITE_LOG) ## only ensure that all the '.log' files exists; they don't ensure that ## the '.log' files are readable, and worse, they don't ensure that the ## '.trs' files even exist. redo_bases=`for i in $$bases; do \ am__f_ok $$i.trs && am__f_ok $$i.log \|\| echo $$i; \ done`; \ if test -n "$$redo_bases"; then \ ## Uh-oh, either some '.log' files were unreadable, or some '.trs' files ## were missing (or unreadable). We need to re-run the corresponding ## tests in order to re-create them. redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \ redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \ if $(am__make_dryrun); then :; else \ ## Break "rm -f" into two calls to minimize the possibility of exceeding ## command line length limits. rm -f $$redo_logs && rm -f $$redo_results \|\| exit 1; \ fi; \ fi; \ ## Use a trick to to ensure that we don't go into an infinite recursion ## in case a test log in $(TEST_LOGS) is the same as $(TEST_SUITE_LOG). ## Yes, this has already happened in practice. Sigh! if test -n "$$am__remaking_logs"; then \ echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \ "recursion detected" >&2; \ ## Invoking this unconditionally could cause a useless "make all" to ## be invoked when '$redo_logs' expands to empty (automake bug#16302). elif test -n "$$redo_logs"; then \ am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \ fi; \ if $(am__make_dryrun); then :; else \ ## Sanity check: each unreadable or non-existent test result file should ## has been properly remade at this point, as should the corresponding log ## file. st=0; \ errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \ for i in $$redo_bases; do \ test -f $$i.trs && test -r $$i.trs \ \|\| { echo "$$errmsg $$i.trs" >&2; st=1; }; \ test -f $$i.log && test -r $$i.log \ \|\| { echo "$$errmsg $$i.log" >&2; st=1; }; \ done; \ test $$st -eq 0 \|\| exit 1; \ fi ## We need a new subshell to work portably with "make -n", since the ## previous part of the recipe contained a $(MAKE) invocation. @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \ ws='[ ]'; \ ## List of test result files. results=`for b in $$bases; do echo $$b.trs; done`; \ test -n "$$results" \|\| results=/dev/null; \ ## Prepare data for the test suite summary. These do not take into account ## unreadable test results, but they'll be appropriately updated later if ## needed. all=` grep "^$$ws:test-result:" $$results \| wc -l`; \ pass=` grep "^$$ws:test-result:$$wsPASS" $$results \| wc -l`; \ fail=` grep "^$$ws:test-result:$$wsFAIL" $$results \| wc -l`; \ skip=` grep "^$$ws:test-result:$$wsSKIP" $$results \| wc -l`; \ xfail=`grep "^$$ws:test-result:$$wsXFAIL" $$results \| wc -l`; \ xpass=`grep "^$$ws:test-result:$$wsXPASS" $$results \| wc -l`; \ error=`grep "^$$ws:test-result:$$wsERROR" $$results \| wc -l`; \ ## Whether the testsuite was successful or not. if test `expr $$fail + $$xpass + $$error` -eq 0; then \ success=true; \ else \ success=false; \ fi; \ ## Make $br a line of exactly 76 '=' characters, that will be used to ## enclose the testsuite summary report when displayed on the console. br='==================='; br=$$br$$br$$br$$br; \ ## When writing the test summary to the console, we want to color a line ## reporting the count of some result only if at least one test ## experienced such a result. This function is handy in this regard. result_count () \ { \ if test x"$$1" = x"--maybe-color"; then \ maybe_colorize=yes; \ elif test x"$$1" = x"--no-color"; then \ maybe_colorize=no; \ else \ echo "$@: invalid 'result_count' usage" >&2; exit 4; \ fi; \ shift; \ desc=$$1 count=$$2; \ if test $$maybe_colorize = yes && test $$count -gt 0; then \ color_start=$$3 color_end=$$std; \ else \ color_start= color_end=; \ fi; \ echo "$${color_start}# $$desc $$count$${color_end}"; \ }; \ ## A shell function that creates the testsuite summary. We need it ## because we have to create two summaries, one for test-suite.log, ## and a possibly-colorized one for console output. create_testsuite_report () \ { \ result_count $$1 "TOTAL:" $$all "$$brg"; \ result_count $$1 "PASS: " $$pass "$$grn"; \ result_count $$1 "SKIP: " $$skip "$$blu"; \ result_count $$1 "XFAIL:" $$xfail "$$lgn"; \ result_count $$1 "FAIL: " $$fail "$$red"; \ result_count $$1 "XPASS:" $$xpass "$$red"; \ result_count $$1 "ERROR:" $$error "$$mgn"; \ }; \ ## Write "global" testsuite log. { \ echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" \| \ $(am__rst_title); \ create_testsuite_report --no-color; \ echo; \ echo ".. contents:: :depth: 2"; \ echo; \ for b in $$bases; do echo $$b; done \ \| $(am__create_global_log); \ } >$(TEST_SUITE_LOG).tmp \|\| exit 1; \ mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \ ## Emit the test summary on the console. if $$success; then \ col="$$grn"; \ else \ col="$$red"; \ test x"$$VERBOSE" = x \|\| cat $(TEST_SUITE_LOG); \ fi; \ ## Multi line coloring is problematic with "less -R", so we really need ## to color each line individually. echo "$${col}$$br$${std}"; \ echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \ echo "$${col}$$br$${std}"; \ ## This is expected to go to the console, so it might have to be colorized. create_testsuite_report --maybe-color; \ echo "$$col$$br$$std"; \ if $$success; then :; else \ echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \ if test -n "$(PACKAGE_BUGREPORT)"; then \ echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \ fi; \ echo "$$col$$br$$std"; \ fi; \ ## Be sure to exit with the proper exit status. The use of "exit 1" below ## is required to work around a FreeBSD make bug (present only when running ## in concurrent mode). See automake bug#9245: ## <https://debbugs.gnu.org/cgi/bugreport.cgi?bug=9245> ## and FreeBSD PR bin/159730: ## <http://www.freebsd.org/cgi/query-pr.cgi?pr=159730>. $$success \|\| exit 1 RECHECK_LOGS = $(TEST_LOGS) ## ------------------------------------------ ## ## Running all tests, or rechecking failures. ## ## ------------------------------------------ ## check-TESTS: %CHECK_DEPS% @list='$(RECHECK_LOGS)'; test -z "$$list" \|\| rm -f $$list @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" \|\| rm -f $$list ## We always have to remove $(TEST_SUITE_LOG), to ensure its rule is run ## in any case even in lazy mode: otherwise, if no test needs rerunning, ## or a prior run plus reruns all happen within the same timestamp (can ## happen with a prior "make TESTS=<subset>"), then we get no log output. ## OTOH, this means that, in the rule for '$(TEST_SUITE_LOG)', we ## cannot use '$?' to compute the set of lazily rerun tests, lest ## we rely on .PHONY to work portably. @test -z "$(TEST_SUITE_LOG)" \|\| rm -f $(TEST_SUITE_LOG) @set +e; $(am__set_TESTS_bases); \ log_list=`for i in $$bases; do echo $$i.log; done`; \ trs_list=`for i in $$bases; do echo $$i.trs; done`; \ ## Remove newlines and normalize whitespace. Trailing (and possibly ## leading) whitespace is known to cause segmentation faults on ## Solaris 10 XPG4 make. log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \ ## Be sure to exit with the proper exit status (automake bug#9245). See ## comments in the recipe of $(TEST_SUITE_LOG) above for more information. exit $$?; ## Recheck must depend on $(check_SCRIPTS), $(check_PROGRAMS), etc. ## It must also depend on the 'all' target. See automake bug#11252. recheck: all %CHECK_DEPS% ## See comments above in the check-TESTS recipe for why remove ## $(TEST_SUITE_LOG) here. @test -z "$(TEST_SUITE_LOG)" \|\| rm -f $(TEST_SUITE_LOG) @set +e; $(am__set_TESTS_bases); \ ## We must only consider tests that had an unexpected outcome (FAIL ## or XPASS) in the earlier run. bases=`for i in $$bases; do echo $$i; done \ \| $(am__list_recheck_tests)` \|\| exit 1; \ log_list=`for i in $$bases; do echo $$i.log; done`; \ ## Remove newlines and normalize whitespace. Trailing (and possibly ## leading) whitespace is known to cause segmentation faults on ## Solaris 10 XPG4 make. log_list=`echo $$log_list`; \ ## Move the '.log' and '.trs' files associated with the tests to be ## re-run out of the way, so that those tests will be re-run by the ## "make test-suite.log" recursive invocation below. ## Two tricky requirements: ## - we must avoid extra files removal when running under "make -n"; ## - in case the test is a compiled program whose compilation fails, ## we must ensure that any '.log' and '.trs' file referring to such ## test are preserved, so that future "make recheck" invocations ## will still try to re-compile and re-run it (automake bug#11791). ## The tricky recursive make invocation below should cater to such ## requirements. $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \ am__force_recheck=am--force-recheck \ TEST_LOGS="$$log_list"; \ ## Be sure to exit with the proper exit status (automake bug#9245). See ## comments in the recipe of $(TEST_SUITE_LOG) above for more information. exit $$? AM_RECURSIVE_TARGETS += check recheck .PHONY: recheck else %?SERIAL_TESTS% ## Obsolescent serial testsuite driver. check-TESTS: $(TESTS) @failed=0; all=0; xfail=0; xpass=0; skip=0; \ srcdir=$(srcdir); export srcdir; \ ## Make sure Solaris VPATH-expands all members of this list, even ## the first and the last one; thus the spaces around $(TESTS) list=' $(TESTS) '; \ $(am__tty_colors); \ if test -n "$$list"; then \ for tst in $$list; do \ if test -f ./$$tst; then dir=./; \ ## Note: Solaris 2.7 seems to expand TESTS using VPATH. That's ## why we also try 'dir='. elif test -f $$tst; then dir=; \ else dir="$(srcdir)/"; fi; \ if $(TESTS_ENVIRONMENT) $${dir}$$tst $(AM_TESTS_FD_REDIRECT); then \ ## Success all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ [\ \ ]$$tst[\ \ ]) \ xpass=`expr $$xpass + 1`; \ failed=`expr $$failed + 1`; \ col=$$red; res=XPASS; \ ;; \ ) \ col=$$grn; res=PASS; \ ;; \ esac; \ elif test $$? -ne 77; then \ ## Failure all=`expr $$all + 1`; \ case " $(XFAIL_TESTS) " in \ [\ \ ]$$tst[\ \ ]) \ xfail=`expr $$xfail + 1`; \ col=$$lgn; res=XFAIL; \ ;; \ ) \ failed=`expr $$failed + 1`; \ col=$$red; res=FAIL; \ ;; \ esac; \ else \ ## Skipped skip=`expr $$skip + 1`; \ col=$$blu; res=SKIP; \ fi; \ echo "$${col}$$res$${std}: $$tst"; \ done; \ ## Prepare the banner if test "$$all" -eq 1; then \ tests="test"; \ All=""; \ else \ tests="tests"; \ All="All "; \ fi; \ if test "$$failed" -eq 0; then \ if test "$$xfail" -eq 0; then \ banner="$$All$$all $$tests passed"; \ else \ if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ fi; \ else \ if test "$$xpass" -eq 0; then \ banner="$$failed of $$all $$tests failed"; \ else \ if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ fi; \ fi; \ ## DASHES should contain the largest line of the banner. dashes="$$banner"; \ skipped=""; \ if test "$$skip" -ne 0; then \ if test "$$skip" -eq 1; then \ skipped="($$skip test was not run)"; \ else \ skipped="($$skip tests were not run)"; \ fi; \ test `echo "$$skipped" \| wc -c` -le `echo "$$banner" \| wc -c` \|\| \ dashes="$$skipped"; \ fi; \ report=""; \ if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ report="Please report to $(PACKAGE_BUGREPORT)"; \ test `echo "$$report" \| wc -c` -le `echo "$$banner" \| wc -c` \|\| \ dashes="$$report"; \ fi; \ dashes=`echo "$$dashes" \| sed s/./=/g`; \ if test "$$failed" -eq 0; then \ col="$$grn"; \ else \ col="$$red"; \ fi; \ ## Multi line coloring is problematic with "less -R", so we really need ## to color each line individually. echo "$${col}$$dashes$${std}"; \ echo "$${col}$$banner$${std}"; \ test -z "$$skipped" \|\| echo "$${col}$$skipped$${std}"; \ test -z "$$report" \|\| echo "$${col}$$report$${std}"; \ echo "$${col}$$dashes$${std}"; \ test "$$failed" -eq 0; \ else :; fi endif %?SERIAL_TESTS%	21.63 KB	2020-01-01 19:43
📄 check2.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 2008-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. if %?FIRST% ## When BSD make is run in parallel mode, it apparently strips any ## leading directory component from the automatic variable '$' (of ## course, against what POSIX mandates). Try to detect and work ## around this incompatibility. am__set_b = \ case '$@' in \ /) \ case '$' in \ /) b='$';; \ ) b=`echo '$@' \| sed 's/\.log$$//'`; \ esac;; \ ) \ b='$';; \ esac endif %?FIRST% ## From a test file to a .log and .trs file. ?GENERIC?%EXT%.log: ?!GENERIC?%OBJ%: %SOURCE% @p='%SOURCE%'; \ ## Another hack to support BSD make in parallel mode. ?!GENERIC? b='%BASE%'; \ ?GENERIC? $(am__set_b); \ $(am__check_pre) %DRIVER% --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) %DRIVER_FLAGS% -- %COMPILE% \ "$$tst" $(AM_TESTS_FD_REDIRECT) ## If no programs are built in this package, then this rule is removed ## at automake time. Otherwise, %am__EXEEXT% expands to a configure time ## conditional, true if $(EXEEXT) is nonempty, thus this rule does not ## conflict with the previous one. if %am__EXEEXT% ?GENERIC?%EXT%$(EXEEXT).log: @p='%SOURCE%'; \ ## Another hack to support BSD make in parallel mode. ?!GENERIC? b='%BASE%'; \ ?GENERIC? $(am__set_b); \ $(am__check_pre) %DRIVER% --test-name "$$f" \ --log-file $$b.log --trs-file $$b.trs \ $(am__common_driver_flags) %DRIVER_FLAGS% -- %COMPILE% \ "$$tst" $(AM_TESTS_FD_REDIRECT) endif %am__EXEEXT%	2.14 KB	2020-01-01 19:43
📄 clean-hdr.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. .PHONY: distclean-hdr distclean-am: distclean-hdr distclean-hdr: -rm -f %FILES%	819 B	2020-01-01 19:43
📄 clean.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. ## We must test each macro because it might be empty, and an empty "rm ## -rf" command looks disturbing. Also, the Solaris 2.4 "rm" will ## return an error if there are no arguments other than "-f". mostlyclean-am: mostlyclean-generic mostlyclean-generic: %MOSTLYCLEAN_RMS% clean-am: clean-generic mostlyclean-am clean-generic: %CLEAN_RMS% distclean-am: distclean-generic clean-am distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" \|\| rm -f $(CONFIG_CLEAN_FILES) -test . = "$(srcdir)" \|\| test -z "$(CONFIG_CLEAN_VPATH_FILES)" \|\| rm -f $(CONFIG_CLEAN_VPATH_FILES) %DISTCLEAN_RMS% ## Makefiles and their dependencies cannot be cleaned by ## an -am dependency, because that would prevent other distclean ## dependencies from calling make recursively. (The multilib ## cleaning rules do this.) ## ## If you change distclean here, you probably also want to change ## maintainer-clean below. distclean: -rm -f %MAKEFILE% maintainer-clean-am: maintainer-clean-generic distclean-am maintainer-clean-generic: ## FIXME: shouldn't we really print these messages before running ## the dependencies? @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." %MAINTAINER_CLEAN_RMS% ## See comment for distclean. maintainer-clean: -rm -f %MAKEFILE% .PHONY: clean mostlyclean distclean maintainer-clean \ clean-generic mostlyclean-generic distclean-generic maintainer-clean-generic ?!SUBDIRS?clean: clean-am ?!SUBDIRS?distclean: distclean-am ?!SUBDIRS?mostlyclean: mostlyclean-am ?!SUBDIRS?maintainer-clean: maintainer-clean-am	2.28 KB	2020-01-01 19:43
📄 compile.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. DEFAULT_INCLUDES = %DEFAULT_INCLUDES% mostlyclean-am: mostlyclean-compile mostlyclean-compile: -rm -f .$(OBJEXT) ?MOSTLYRMS?%MOSTLYRMS% distclean-am: distclean-compile distclean-compile: -rm -f .tab.c ?DISTRMS?%DISTRMS% .PHONY: mostlyclean-compile distclean-compile	1011 B	2020-01-01 19:43
📄 configure.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 2001-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. ## This dummy rule is called from subdirectories whenever one of the ## top-level Makefile's dependencies must be updated. It does depend ## on %MAKEFILE% for the benefit of non-GNU make implementations (GNU ## make will always make sure %MAKEFILE% is updated before considering ## the am--refresh target anyway). if %?TOPDIR_P% .PHONY: am--refresh am--refresh: %MAKEFILE% @: endif %?TOPDIR_P% ## --------------------- ## ## Building Makefile.. ## ## --------------------- ## ## This rule remakes the Makefile.in. %MAKEFILE-IN%: %MAINTAINER-MODE% %MAKEFILE-AM% %MAKEFILE-IN-DEPS% $(am__configure_deps) ## If configure.ac or one of configure's dependencies has changed, all ## Makefile.in are to be updated; it is then more efficient to run ## automake on all the Makefiles at once. It also allow Automake to be ## run for newly added directories. @for dep in $?; do \ case '$(am__configure_deps)' in \ $$dep) \ ?TOPDIR_P? echo ' cd $(srcdir) && $(AUTOMAKE) %AUTOMAKE-OPTIONS%'; \ ?TOPDIR_P? $(am__cd) $(srcdir) && $(AUTOMAKE) %AUTOMAKE-OPTIONS% \ ?TOPDIR_P? && exit 0; \ ?!TOPDIR_P? ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ ## If on the other hand, subdir/Makefile.in has been removed, then toplevel ## am--refresh will not be aware of any need to run. We still invoke it ## due to $? listing all prerequisites. Fix up for it by running the rebuild ## rule for this file only, below. ?!TOPDIR_P? && { if test -f $@; then exit 0; else break; fi; }; \ exit 1;; \ esac; \ done; \ ## Otherwise, rebuild only this file. echo ' cd $(top_srcdir) && $(AUTOMAKE) %AUTOMAKE-OPTIONS% %MAKEFILE-AM-SOURCES%'; \ $(am__cd) $(top_srcdir) && \ $(AUTOMAKE) %AUTOMAKE-OPTIONS% %MAKEFILE-AM-SOURCES% ## Ensure that GNU make doesn't remove Makefile if ./config.status (below) ## is interrupted. Otherwise, the user would need to know to rerun ## ./config.status to recreate the lost Makefile. .PRECIOUS: %MAKEFILE% ## This rule remakes the Makefile. %MAKEFILE%: %MAKEFILE-DEPS% $(top_builddir)/config.status ## If Makefile is to be updated because of config.status, then run ## config.status without argument in order to (i) rerun all the ## AC_CONFIG_COMMANDS including those that are not visible to ## Automake, and (ii) to save time by running config.status all with ## all the files, instead of once per file (iii) generate Makefiles ## in newly added directories. @case '$?' in \ ## Don't prefix $(top_builddir), because GNU make will strip it out ## when it's '.'. config.status) \ ?TOPDIR_P? echo ' $(SHELL) ./config.status'; \ ?TOPDIR_P? $(SHELL) ./config.status;; \ ?!TOPDIR_P? cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ ) \ ## FIXME: $(am__maybe_remake_depfiles) lets us re-run the rule to create the ## .P files. Ideally we wouldn't have to do this by hand. echo ' cd $(top_builddir) && $(SHELL) ./config.status %CONFIG-MAKEFILE% $(am__maybe_remake_depfiles)'; \ cd $(top_builddir) && $(SHELL) ./config.status %CONFIG-MAKEFILE% $(am__maybe_remake_depfiles);; \ esac; ## Avoid the "deleted header file" problem for the dependencies. ## Add the trailing "$(am__empty)" to trick Automake into not spuriously ## complaining about "duplicated targets" in case the %MAKEFILE-IN-DEPS% ## list expands to a single target that is also declared in some ## user-defined rule. ?HAVE-MAKEFILE-IN-DEPS?%MAKEFILE-IN-DEPS% $(am__empty): DIST_COMMON += %MAKEFILE-AM% ## --------------------------- ## ## config.status & configure. ## ## --------------------------- ## if %?TOPDIR_P% ## Always require configure.ac and configure at top level, even if they ## don't exist. This is especially important for configure, since it ## won't be created until autoconf is run -- which might be after ## automake is run. DIST_COMMON += $(top_srcdir)/configure $(am__configure_deps) endif %?TOPDIR_P% $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ?TOPDIR_P? $(SHELL) ./config.status --recheck ?!TOPDIR_P? cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: %MAINTAINER-MODE% $(am__configure_deps) ?TOPDIR_P? $(am__cd) $(srcdir) && $(AUTOCONF) ?!TOPDIR_P? cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ## ------------ ## ## aclocal.m4. ## ## ------------ ## ## Whenever a configure dependency changes we need to rebuild ## aclocal.m4 too. Changing configure.ac, or any file included by ## aclocal.m4 might require adding more files to aclocal.m4. Hence ## the $(am__configure_deps) dependency. ## We still need $(ACLOCAL_AMFLAGS) for sake of backward-compatibility; ## we should hopefully be able to get rid of it in a not-so-distant ## future. if %?REGEN-ACLOCAL-M4% $(ACLOCAL_M4): %MAINTAINER-MODE% $(am__aclocal_m4_deps) ?TOPDIR_P? $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) ?!TOPDIR_P? cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ## Avoid the "deleted header file" problem for the dependencies. $(am__aclocal_m4_deps): endif %?REGEN-ACLOCAL-M4% ## --------- ## ## cleanup. ## ## --------- ## ## We special-case config.status here. If we do it as part of the ## normal clean processing for this directory, then it might be ## removed before some subdir is cleaned. However, that subdir's ## Makefile depends on config.status. if %?TOPDIR_P% am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ configure.lineno config.status.lineno distclean: -rm -f $(am__CONFIG_DISTCLEAN_FILES) ## Note: you might think we should remove Makefile.in, configure, or ## aclocal.m4 here in a maintainer-clean rule. However, the GNU ## Coding Standards explicitly prohibit this. maintainer-clean: -rm -f $(am__CONFIG_DISTCLEAN_FILES) ## autom4te.cache is created by Autoconf; the only valid target to ## remove it is maintainer-clean, not distclean. ## If you have an autom4te.cache that cause distcheck to fail, then ## it is good news: you finally discovered that autoconf and/or ## autoheader is needed to use your tarball, which is wrong. -rm -rf $(top_srcdir)/autom4te.cache endif %?TOPDIR_P%	6.72 KB	2020-01-01 19:43
📄 data.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. if %?INSTALL% include inst-vars.am endif %?INSTALL% ## ------------ ## ## Installing. ## ## ------------ ## if %?INSTALL% am__installdirs += "$(DESTDIR)$(%NDIR%dir)" ?EXEC?.PHONY install-exec-am: install-%DIR%%PRIMARY% ?!EXEC?.PHONY install-data-am: install-%DIR%%PRIMARY% install-%DIR%%PRIMARY%: $(%DIR%_%PRIMARY%) @$(NORMAL_INSTALL) if %?BASE% ## Funny invocation because Makefile variable can be empty, leading to ## a syntax error in sh. @list='$(%DIR%_%PRIMARY%)'; test -n "$(%NDIR%dir)" \|\| list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)" \|\| exit 1; \ fi; \ for p in $$list; do \ ## A file can be in the source directory or the build directory. if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ## If the _%PRIMARY% variable has an entry like foo/bar, install it as ## $(destdir)/bar, not $(destdir)/foo/bar. The user can make a ## new dir variable or use a nobase_ target for the latter case. echo "$$d$$p"; \ done \| $(am__base_list) \| \ while read files; do \ echo " $(INSTALL_%ONE_PRIMARY%) $$files '$(DESTDIR)$(%NDIR%dir)'"; \ $(INSTALL_%ONE_PRIMARY%) $$files "$(DESTDIR)$(%NDIR%dir)" \|\| exit $$?; \ done else !%?BASE% @list='$(%DIR%_%PRIMARY%)'; test -n "$(%NDIR%dir)" \|\| list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)" \|\| exit 1; \ fi; \ $(am__nobase_list) \| while read dir files; do \ xfiles=; for file in $$files; do \ if test -f "$$file"; then xfiles="$$xfiles $$file"; \ else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \ test -z "$$xfiles" \|\| { \ test "x$$dir" = x. \|\| { \ echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)/$$dir"; }; \ echo " $(INSTALL_%ONE_PRIMARY%) $$xfiles '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \ $(INSTALL_%ONE_PRIMARY%) $$xfiles "$(DESTDIR)$(%NDIR%dir)/$$dir" \|\| exit $$?; }; \ done endif !%?BASE% endif %?INSTALL% ## -------------- ## ## Uninstalling. ## ## -------------- ## if %?INSTALL% .PHONY uninstall-am: uninstall-%DIR%%PRIMARY% uninstall-%DIR%%PRIMARY%: @$(NORMAL_UNINSTALL) @list='$(%DIR%_%PRIMARY%)'; test -n "$(%NDIR%dir)" \|\| list=; \ ?BASE? files=`for p in $$list; do echo $$p; done \| sed -e 's\|^.*/\|\|'`; \ ?!BASE? $(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \ dir='$(DESTDIR)$(%NDIR%dir)'; $(am__uninstall_files_from_dir) endif %?INSTALL% ## ---------- ## ## Cleaning. ## ## ---------- ## ## Nothing. ## -------------- ## ## Distributing. ## ## -------------- ## if %?DIST% DIST_COMMON += %DISTVAR% endif %?DIST%	3.32 KB	2020-01-01 19:43
📄 dejagnu.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. ## Name of tool to use. Default is the same as the package. DEJATOOL = $(PACKAGE) ## Default flags to pass to dejagnu. The user can override this. RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir EXPECT = expect RUNTEST = runtest .PHONY: check-DEJAGNU check-DEJAGNU: site.exp ## Life is easiest with an absolute srcdir, so do that. srcdir='$(srcdir)'; export srcdir; \ EXPECT=$(EXPECT); export EXPECT; \ ## If runtest can't be found, print a warning but don't die. It is ## pointless to cause a failure if the tests cannot be run at all. if $(SHELL) -c "$(RUNTEST) --version" > /dev/null 2>&1; then \ exit_status=0; l='$(DEJATOOL)'; for tool in $$l; do \ if $(RUNTEST) $(RUNTESTDEFAULTFLAGS) $(AM_RUNTESTFLAGS) $(RUNTESTFLAGS); \ then :; else exit_status=1; fi; \ done; \ else echo "WARNING: could not find '$(RUNTEST)'" 1>&2; :;\ fi; \ exit $$exit_status ## ------------------- ## ## Building site.exp. ## ## ------------------- ## ## Note that in the rule we don't directly generate site.exp to avoid ## the possibility of a corrupted site.exp if make is interrupted. ## Jim Meyering has some useful text on this topic. site.exp: Makefile $(EXTRA_DEJAGNU_SITE_CONFIG) @echo 'Making a new site.exp file ...' @echo '## these variables are automatically generated by make ##' >site.tmp @echo '# Do not edit here. If you wish to override these values' >>site.tmp @echo '# edit the last section' >>site.tmp @echo 'set srcdir "$(srcdir)"' >>site.tmp @echo "set objdir `pwd`" >>site.tmp ## Quote the _alias variables because they might be empty. ?BUILD? @echo 'set build_alias "$(build_alias)"' >>site.tmp ?BUILD? @echo 'set build_triplet $(build_triplet)' >>site.tmp ?HOST? @echo 'set host_alias "$(host_alias)"' >>site.tmp ?HOST? @echo 'set host_triplet $(host_triplet)' >>site.tmp ?TARGET? @echo 'set target_alias "$(target_alias)"' >>site.tmp ?TARGET? @echo 'set target_triplet $(target_triplet)' >>site.tmp ## Allow the package author to extend site.exp. @list='$(EXTRA_DEJAGNU_SITE_CONFIG)'; for f in $$list; do \ echo "## Begin content included from file $$f. Do not modify. ##" \ && cat `test -f "$$f" \|\| echo '$(srcdir)/'`$$f \ && echo "## End content included from file $$f. ##" \ \|\| exit 1; \ done >> site.tmp @echo "## End of auto-generated content; you can edit from here. ##" >> site.tmp @if test -f site.exp; then \ sed -e '1,/^## End of auto-generated content.##/d' site.exp >> site.tmp; \ fi @-rm -f site.bak @test ! -f site.exp \|\| mv site.exp site.bak @mv site.tmp site.exp ## ---------- ## ## Cleaning. ## ## ---------- ## .PHONY distclean-am: distclean-DEJAGNU distclean-DEJAGNU: ## Any other cleaning must be done by the user or by the test suite ## itself. We can't predict what dejagnu or the test suite might ## generate. -rm -f site.exp site.bak -l='$(DEJATOOL)'; for tool in $$l; do \ rm -f $$tool.sum $$tool.log; \ done	3.58 KB	2020-01-01 19:43
📄 depend.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. am__mv = mv -f $(am__depfiles_remade): @$(MKDIR_P) $(@D) @echo '# dummy' >$@-t && $(am__mv) $@-t $@ am--depfiles: $(am__depfiles_remade) .PHONY: am--depfiles ## This Makefile depends on Depdirs' files, so we should never ## erase them in -am or -recursive rules; that would prevent any other ## rules from being recursive (for instance multilib clean rules are ## recursive). if %?DISTRMS% distclean: %DISTRMS% maintainer-clean: %DISTRMS% endif	1.16 KB	2020-01-01 19:43
📄 depend2.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. ## This file is read several times: ## - once per extension (not per language) for generic compilation rules ## - once for each file which requires specific flags. ## Note it is on purpose we wrote "if %AMDEP%", since: ## ## - if deps are turned off, %AMDEP% is mapped onto FALSE, and therefore ## the "if FALSE" chunk is removed (automake-time conditionals). ## ## - if deps are on, %AMDEP% is mapped onto AMDEP, and therefore ## the "if AMDEP" chunk is prefix with @AMDEP_TRUE@ just like for any ## other configure-time conditional. ## ## We do likewise for %FASTDEP%; this expands to an ordinary configure-time ## conditional. %FASTDEP% is used to speed up the common case of building ## a package with gcc 3.x or later. In this case we can skip the use of ## depcomp and easily inline the dependency tracking. if %?NONLIBTOOL% ?GENERIC?%EXT%.o: ?!GENERIC?%OBJ%: %SOURCE% if %FASTDEP% ## In fast-dep mode, we can always use -o. ## For non-suffix rules, we must emulate a VPATH search on %SOURCE%. ?!GENERIC? %VERBOSE%%COMPILE% -MT %OBJ% -MD -MP -MF %DEPBASE%.Tpo %-c% -o %OBJ% %SOURCEFLAG%`test -f '%SOURCE%' \|\| echo '$(srcdir)/'`%SOURCE% ?!GENERIC? %SILENT%$(am__mv) %DEPBASE%.Tpo %DEPBASE%.Po ?GENERIC??!SUBDIROBJ? %VERBOSE%%COMPILE% -MT %OBJ% -MD -MP -MF %DEPBASE%.Tpo %-c% -o %OBJ% %SOURCEFLAG%%SOURCE% ?GENERIC??!SUBDIROBJ? %SILENT%$(am__mv) %DEPBASE%.Tpo %DEPBASE%.Po ?GENERIC??SUBDIROBJ? %VERBOSE%depbase=`echo %OBJ% \| sed 's\|[^/]$$\|$(DEPDIR)/&\|;s\|\.o$$\|\|'`;\ ?GENERIC??SUBDIROBJ? %COMPILE% -MT %OBJ% -MD -MP -MF %DEPBASE%.Tpo %-c% -o %OBJ% %SOURCEFLAG%%SOURCE% &&\ ?GENERIC??SUBDIROBJ? $(am__mv) %DEPBASE%.Tpo %DEPBASE%.Po else !%FASTDEP% if %AMDEP% %VERBOSE%source='%SOURCE%' object='%OBJ%' libtool=no @AMDEPBACKSLASH@ DEPDIR=$(DEPDIR) $(%FPFX%DEPMODE) $(depcomp) @AMDEPBACKSLASH@ endif %AMDEP% if %?GENERIC% ?-o? %VERBOSE-NODEP%%COMPILE% %-c% %-o% %OBJ% %SOURCEFLAG%%SOURCE% ?!-o? %VERBOSE-NODEP%%COMPILE% %-c% %SOURCEFLAG%%SOURCE% else !%?GENERIC% ## For non-suffix rules, we must emulate a VPATH search on %SOURCE%. ?-o? %VERBOSE-NODEP%%COMPILE% %-c% %-o% %OBJ% %SOURCEFLAG%`test -f '%SOURCE%' \|\| echo '$(srcdir)/'`%SOURCE% ?!-o? %VERBOSE-NODEP%%COMPILE% %-c% %SOURCEFLAG%`test -f '%SOURCE%' \|\| echo '$(srcdir)/'`%SOURCE% endif !%?GENERIC% endif !%FASTDEP% ?GENERIC?%EXT%.obj: ?!GENERIC?%OBJOBJ%: %SOURCE% if %FASTDEP% ## In fast-dep mode, we can always use -o. ## For non-suffix rules, we must emulate a VPATH search on %SOURCE%. ?!GENERIC? %VERBOSE%%COMPILE% -MT %OBJOBJ% -MD -MP -MF %DEPBASE%.Tpo %-c% -o %OBJOBJ% %SOURCEFLAG%`if test -f '%SOURCE%'; then $(CYGPATH_W) '%SOURCE%'; else $(CYGPATH_W) '$(srcdir)/%SOURCE%'; fi` ?!GENERIC? %SILENT%$(am__mv) %DEPBASE%.Tpo %DEPBASE%.Po ?GENERIC??!SUBDIROBJ? %VERBOSE%%COMPILE% -MT %OBJOBJ% -MD -MP -MF %DEPBASE%.Tpo %-c% -o %OBJOBJ% %SOURCEFLAG%`$(CYGPATH_W) '%SOURCE%'` ?GENERIC??!SUBDIROBJ? %SILENT%$(am__mv) %DEPBASE%.Tpo %DEPBASE%.Po ?GENERIC??SUBDIROBJ? %VERBOSE%depbase=`echo %OBJ% \| sed 's\|[^/]$$\|$(DEPDIR)/&\|;s\|\.obj$$\|\|'`;\ ?GENERIC??SUBDIROBJ? %COMPILE% -MT %OBJOBJ% -MD -MP -MF %DEPBASE%.Tpo %-c% -o %OBJOBJ% %SOURCEFLAG%`$(CYGPATH_W) '%SOURCE%'` &&\ ?GENERIC??SUBDIROBJ? $(am__mv) %DEPBASE%.Tpo %DEPBASE%.Po else !%FASTDEP% if %AMDEP% %VERBOSE%source='%SOURCE%' object='%OBJOBJ%' libtool=no @AMDEPBACKSLASH@ DEPDIR=$(DEPDIR) $(%FPFX%DEPMODE) $(depcomp) @AMDEPBACKSLASH@ endif %AMDEP% if %?GENERIC% ?-o? %VERBOSE-NODEP%%COMPILE% %-c% %-o% %OBJOBJ% %SOURCEFLAG%`$(CYGPATH_W) '%SOURCE%'` ?!-o? %VERBOSE-NODEP%%COMPILE% %-c% `$(CYGPATH_W) %SOURCEFLAG%'%SOURCE%'` else !%?GENERIC% ## For non-suffix rules, we must emulate a VPATH search on %SOURCE%. ?-o? %VERBOSE-NODEP%%COMPILE% %-c% %-o% %OBJOBJ% %SOURCEFLAG%`if test -f '%SOURCE%'; then $(CYGPATH_W) '%SOURCE%'; else $(CYGPATH_W) '$(srcdir)/%SOURCE%'; fi` ?!-o? %VERBOSE-NODEP%%COMPILE% %-c% %SOURCEFLAG%`if test -f '%SOURCE%'; then $(CYGPATH_W) '%SOURCE%'; else $(CYGPATH_W) '$(srcdir)/%SOURCE%'; fi` endif !%?GENERIC% endif !%FASTDEP% endif %?NONLIBTOOL% if %?LIBTOOL% ?GENERIC?%EXT%.lo: ?!GENERIC?%LTOBJ%: %SOURCE% if %FASTDEP% ## In fast-dep mode, we can always use -o. ## For non-suffix rules, we must emulate a VPATH search on %SOURCE%. ?!GENERIC? %VERBOSE%%LTCOMPILE% -MT %LTOBJ% -MD -MP -MF %DEPBASE%.Tpo %-c% -o %LTOBJ% %SOURCEFLAG%`test -f '%SOURCE%' \|\| echo '$(srcdir)/'`%SOURCE% ?!GENERIC? %SILENT%$(am__mv) %DEPBASE%.Tpo %DEPBASE%.Plo ?GENERIC??!SUBDIROBJ? %VERBOSE%%LTCOMPILE% -MT %LTOBJ% -MD -MP -MF %DEPBASE%.Tpo %-c% -o %LTOBJ% %SOURCEFLAG%%SOURCE% ?GENERIC??!SUBDIROBJ? %SILENT%$(am__mv) %DEPBASE%.Tpo %DEPBASE%.Plo ?GENERIC??SUBDIROBJ? %VERBOSE%depbase=`echo %OBJ% \| sed 's\|[^/]*$$\|$(DEPDIR)/&\|;s\|\.lo$$\|\|'`;\ ?GENERIC??SUBDIROBJ? %LTCOMPILE% -MT %LTOBJ% -MD -MP -MF %DEPBASE%.Tpo %-c% -o %LTOBJ% %SOURCEFLAG%%SOURCE% &&\ ?GENERIC??SUBDIROBJ? $(am__mv) %DEPBASE%.Tpo %DEPBASE%.Plo else !%FASTDEP% if %AMDEP% %VERBOSE%source='%SOURCE%' object='%LTOBJ%' libtool=yes @AMDEPBACKSLASH@ DEPDIR=$(DEPDIR) $(%FPFX%DEPMODE) $(depcomp) @AMDEPBACKSLASH@ endif %AMDEP% ## We can always use '-o' with Libtool. ?GENERIC? %VERBOSE-NODEP%%LTCOMPILE% %-c% -o %LTOBJ% %SOURCEFLAG%%SOURCE% ## For non-suffix rules, we must emulate a VPATH search on %SOURCE%. ?!GENERIC? %VERBOSE-NODEP%%LTCOMPILE% %-c% -o %LTOBJ% %SOURCEFLAG%`test -f '%SOURCE%' \|\| echo '$(srcdir)/'`%SOURCE% endif !%FASTDEP% endif %?LIBTOOL%	5.95 KB	2020-01-01 19:43
📄 distdir.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 2001-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. DIST_COMMON += $(am__DIST_COMMON) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) if %?TOPDIR_P% distdir = $(PACKAGE)-$(VERSION) top_distdir = $(distdir) am__remove_distdir = \ if test -d "$(distdir)"; then \ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ && rm -rf "$(distdir)" \ ## On MSYS (1.0.17) it is not possible to remove a directory that is in ## use; so, if the first rm fails, we sleep some seconds and retry, to ## give pending processes some time to exit and "release" the directory ## before we remove it. The value of "some seconds" is 5 for the moment, ## which is mostly an arbitrary value, but seems high enough in practice. ## See automake bug#10470. \|\| { sleep 5 && rm -rf "$(distdir)"; }; \ else :; fi am__post_remove_distdir = $(am__remove_distdir) endif %?TOPDIR_P% if %?SUBDIRS% ## computes a relative pathname RELDIR such that DIR1/RELDIR = DIR2. ## Input: ## - DIR1 relative pathname, relative to the current directory ## - DIR2 relative pathname, relative to the current directory ## Output: ## - reldir relative pathname of DIR2, relative to DIR1 am__relativize = \ dir0=`pwd`; \ sed_first='s,^$[^/]$/.$$,\1,'; \ sed_rest='s,^[^/]/,,'; \ sed_last='s,^./$[^/]$$$,\1,'; \ sed_butlast='s,/[^/]$$,,'; \ while test -n "$$dir1"; do \ first=`echo "$$dir1" \| sed -e "$$sed_first"`; \ if test "$$first" != "."; then \ if test "$$first" = ".."; then \ dir2=`echo "$$dir0" \| sed -e "$$sed_last"`/"$$dir2"; \ dir0=`echo "$$dir0" \| sed -e "$$sed_butlast"`; \ else \ first2=`echo "$$dir2" \| sed -e "$$sed_first"`; \ if test "$$first2" = "$$first"; then \ dir2=`echo "$$dir2" \| sed -e "$$sed_rest"`; \ else \ dir2="../$$dir2"; \ fi; \ dir0="$$dir0"/"$$first"; \ fi; \ fi; \ dir1=`echo "$$dir1" \| sed -e "$$sed_rest"`; \ done; \ reldir="$$dir2" endif %?SUBDIRS% .PHONY: distdir if %?SUBDIRS% AM_RECURSIVE_TARGETS += distdir distdir-am endif %?SUBDIRS% distdir: $(BUILT_SOURCES) $(MAKE) $(AM_MAKEFLAGS) distdir-am distdir-am: $(DISTFILES) ## ## For Gnits users, this is pretty handy. Look at 15 lines ## in case some explanatory text is desirable. ## if %?TOPDIR_P% if %?CK-NEWS% @case `sed 15q $(srcdir)/NEWS` in \ "$(VERSION)") : ;; \ ) \ echo "NEWS not updated; not releasing" 1>&2; \ exit 1;; \ esac endif %?CK-NEWS% endif %?TOPDIR_P% ## ## Only for the top dir. ## if %?TOPDIR_P% $(am__remove_distdir) test -d "$(distdir)" \|\| mkdir "$(distdir)" endif %?TOPDIR_P% ## ## @srcdirstrip=`echo "$(srcdir)" \| sed 's/[].[^$$\\]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" \| sed 's/[].[^$$\\]/\\\\&/g'`; \ ## ## Yet another hack to support SUN make. ## ## Let's assume 'foo' appears in DISTFILES and is not a built file. ## When building with VPATH=$(srcdir), SUN make and OSF1/Tru64 will ## rewrite 'foo' as '$(srcdir)/foo'. An attempt to install the file ## with ## cp $file $(distdir)/$file ## will thus install $(srcdir)/foo as $(distdir)/$(srcdir)/foo ## instead of $(distdir)/foo. ## ## So let's strip this leading $(srcdir)/ when it exists. (As far we ## know, only SUN make and OSF1/Tru64 make add it.) Searching whether ## the file is to be found in the source or build directory will be ## done later. ## ## In case we are _not_ using SUN or OSF1/Tru64 make, how can we be sure ## we are not stripping a legitimate filename that starts with the ## same pattern as $(srcdir)? ## Well, it can't happen without the Makefile author distributing ## something out of the distribution (which is bad). As an example, ## consider "EXTRA_DIST = ../bar". This is an issue if $srcdir is ## '..', however getting this value for srcdir is impossible: ## "EXTRA_DIST = ../bar" implies we are in a subdirectory (so '../bar' ## is within the package), hence '$srcdir' is something like ## '../../subdir'. ## ## There is more to say about files which are above the current directory, ## like '../bar' in the previous example. The OSF1/Tru64 make ## implementation can simplify filenames resulting from a VPATH lookup. ## For instance if "VPATH = ../../subdir" and '../bar' is found in that ## VPATH directory, then occurrences of '../bar' will be replaced by ## '../../bar' (instead of '../../subdir/../bar'). This obviously defeats ## any attempt to strip a leading $srcdir. Presently we have no workaround ## for this. We avoid this issue by writing "EXTRA_DIST = $(srcdir)/../bar" ## instead of "EXTRA_DIST = ../bar". This prefixing is needed only for files ## above the current directory. Fortunately, apart from auxdir files which ## can be located in .. or ../.., this situation hardly occurs in practice. ## ## Also rewrite $(top_srcdir) (which sometimes appears in DISTFILES, and can ## be absolute) by $(top_builddir) (which is always relative). $(srcdir) will ## be prepended later. list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done \| \ sed -e "s\|^$$srcdirstrip/\|\|;t" \ -e "s\|^$$topsrcdirstrip/\|$(top_builddir)/\|;t"`; \ ## (The second 't' command clears the flag for the next round.) ## ## Make the subdirectories for the files. ## case $$dist_files in \ /) $(MKDIR_P) `echo "$$dist_files" \| \ sed '/\//!d;s\|^\|$(distdir)/\|;s,/[^/]$$,,' \| \ sort -u` ;; \ esac; \ ## ## for file in $$dist_files; do \ ## ## Always look for the file in the build directory first. That way ## for something like yacc output we will correctly pick up the latest ## version. Also check for directories in the build directory first, ## so one can ship generated directories. ## if test -f $$file \|\| test -d $$file; then d=.; else d=$(srcdir); fi; \ ## ## Use cp, not ln. There are situations in which "ln" can fail. For ## instance a file to distribute could actually be a cross-filesystem ## symlink -- this can easily happen if "gettextize" was run on the ## distribution. ## if test -d $$d/$$file; then \ ## Don't mention $$file in the destination argument, since this fails if ## the destination directory already exists. Also, use '-R' and not '-r'. ## '-r' is almost always incorrect. ## ## If a directory exists both in '.' and $(srcdir), then we copy the ## files from $(srcdir) first and then install those from '.'. This ## can help people who distribute directories made of source files ## and generated files. It is also important when the directory ## exists only in $(srcdir), because some vendor Make (such as Tru64) ## will magically create an empty directory in '.'. dir=`echo "/$$file" \| sed -e 's,/[^/]$$,,'`; \ ## If the destination directory already exists, it may contain read-only ## files, e.g., during "make distcheck". if test -d "$(distdir)/$$file"; then \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" \|\| exit 1; \ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ fi; \ cp -fpR $$d/$$file "$(distdir)$$dir" \|\| exit 1; \ else \ ## Test for file existence because sometimes a file gets included in ## DISTFILES twice. For example this happens when a single source ## file is used in building more than one program. ## See also test 'dist-repeated.sh'. test -f "$(distdir)/$$file" \ \|\| cp -p $$d/$$file "$(distdir)/$$file" \ \|\| exit 1; \ fi; \ done ## ## Test for directory existence here because previous automake ## invocation might have created some directories. Note that we ## explicitly set distdir for the subdir make; that lets us mix-n-match ## many automake-using packages into one large package, and have "dist" ## at the top level do the right thing. If we're in the topmost ## directory, then we use 'distdir' instead of 'top_distdir'; this lets ## us work correctly with an enclosing package. if %?SUBDIRS% @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ $(am__make_dryrun) \ \|\| test -d "$(distdir)/$$subdir" \ \|\| $(MKDIR_P) "$(distdir)/$$subdir" \ \|\| exit 1; \ dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ $(am__relativize); \ new_distdir=$$reldir; \ dir1=$$subdir; dir2="$(top_distdir)"; \ $(am__relativize); \ new_top_distdir=$$reldir; \ echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ ($(am__cd) $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$new_top_distdir" \ distdir="$$new_distdir" \ ## Disable am__remove_distdir so that sub-packages do not clear a ## directory we have already cleared and might even have populated ## (e.g. shared AUX dir in the sub-package). am__remove_distdir=: \ ## Disable filename length check: am__skip_length_check=: \ ## No need to fix modes more than once: am__skip_mode_fix=: \ distdir) \ \|\| exit 1; \ fi; \ done endif %?SUBDIRS% ## ## We might have to perform some last second updates, such as updating ## info files. ## We must explicitly set distdir and top_distdir for these sub-makes. ## if %?DIST-TARGETS% $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$(top_distdir)" distdir="$(distdir)" \ %DIST-TARGETS% endif %?DIST-TARGETS% ## ## This complex find command will try to avoid changing the modes of ## links into the source tree, in case they're hard-linked. ## ## Ignore return result from chmod, because it might give an error ## if we chmod a symlink. ## ## Another nastiness: if the file is unreadable by us, we make it ## readable regardless of the number of links to it. This only ## happens in perverse cases. ## ## We use $(install_sh) because that is a known-portable way to modify ## the file in place in the source tree. ## ## If we are being invoked recursively, then there is no need to walk ## the whole subtree again. This is a complexity reduction for a deep ## hierarchy of subpackages. ## if %?TOPDIR_P% -test -n "$(am__skip_mode_fix)" \ \|\| find "$(distdir)" -type d ! -perm -755 \ -exec chmod u+rwx,go+rx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ \|\| chmod -R a+r "$(distdir)" if %?FILENAME_FILTER% @if test -z "$(am__skip_length_check)" && find "$(distdir)" -type f -print \| \ grep '^%FILENAME_FILTER%' 1>&2; then \ echo 'error: the above filenames are too long' 1>&2; \ exit 1; \ else :; fi endif %?FILENAME_FILTER% endif %?TOPDIR_P% ## --------------------------------------- ## ## Building various distribution flavors. ## ## --------------------------------------- ## ## Note that we don't use GNU tar's '-z' option. One reason (but not ## the only reason) is that some versions of tar (e.g., OSF1) ## interpret '-z' differently. ## ## The -o option of GNU tar used to exclude empty directories. This ## behavior was fixed in tar 1.12 (released on 1997-04-25). But older ## versions of tar are still used (for instance NetBSD 1.6.1 ships ## with tar 1.11.2). We do not do anything specific w.r.t. this ## incompatibility since packages where empty directories need to be ## present in the archive are really unusual. ## ## We order DIST_TARGETS by expected duration of the compressors, ## slowest first, for better parallelism in "make dist". Do not ## reorder DIST_ARCHIVES, users may expect gzip to be first. ## ## Traditionally, gzip prepended the contents of the GZIP environment ## variable to its arguments, and the commands below formerly used ## this by invoking 'GZIP=$(GZIP_ENV) gzip'. The GZIP environment ## variable is now considered to be obsolescent, so the commands below ## now use 'eval GZIP= gzip $(GZIP_ENV)' instead; this should work ## with both older and newer gzip implementations. The 'eval' is to ## support makefile assignments like 'GZIP_ENV = "-9 -n"' that quote ## the GZIP_ENV right-hand side because that was needed with the ## former invocation pattern. if %?TOPDIR_P% ?GZIP?DIST_ARCHIVES += $(distdir).tar.gz GZIP_ENV = --best .PHONY: dist-gzip dist-gzip: distdir tardir=$(distdir) && $(am__tar) \| eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz $(am__post_remove_distdir) ?BZIP2?DIST_ARCHIVES += $(distdir).tar.bz2 .PHONY: dist-bzip2 dist-bzip2: distdir tardir=$(distdir) && $(am__tar) \| BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 $(am__post_remove_distdir) ?LZIP?DIST_ARCHIVES += $(distdir).tar.lz .PHONY: dist-lzip dist-lzip: distdir tardir=$(distdir) && $(am__tar) \| lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz $(am__post_remove_distdir) ?XZ?DIST_ARCHIVES += $(distdir).tar.xz .PHONY: dist-xz dist-xz: distdir tardir=$(distdir) && $(am__tar) \| XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz $(am__post_remove_distdir) ?ZSTD?DIST_ARCHIVES += $(distdir).tar.zst .PHONY: dist-zstd dist-zstd: distdir tardir=$(distdir) && $(am__tar) \| zstd -c $${ZSTD_CLEVEL-$${ZSTD_OPT--19}} >$(distdir).tar.zst $(am__post_remove_distdir) ?COMPRESS?DIST_ARCHIVES += $(distdir).tar.Z .PHONY: dist-tarZ dist-tarZ: distdir @echo WARNING: "Support for distribution archives compressed with" \ "legacy program 'compress' is deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 tardir=$(distdir) && $(am__tar) \| compress -c >$(distdir).tar.Z $(am__post_remove_distdir) ?SHAR?DIST_ARCHIVES += $(distdir).shar.gz .PHONY: dist-shar dist-shar: distdir @echo WARNING: "Support for shar distribution archives is" \ "deprecated." >&2 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 shar $(distdir) \| eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz $(am__post_remove_distdir) ?ZIP?DIST_ARCHIVES += $(distdir).zip .PHONY: dist-zip dist-zip: distdir -rm -f $(distdir).zip zip -rq $(distdir).zip $(distdir) $(am__post_remove_distdir) ?LZIP?DIST_TARGETS += dist-lzip ?XZ?DIST_TARGETS += dist-xz ?SHAR?DIST_TARGETS += dist-shar ?BZIP2?DIST_TARGETS += dist-bzip2 ?GZIP?DIST_TARGETS += dist-gzip ?ZIP?DIST_TARGETS += dist-zip ?ZSTD?DIST_TARGETS += dist-zstd ?COMPRESS?DIST_TARGETS += dist-tarZ endif %?TOPDIR_P% ## ------------------------------------------------- ## ## Building all the requested distribution flavors. ## ## ------------------------------------------------- ## ## Currently we cannot use if/endif inside a rule. The file_contents ## parser needs work. if %?TOPDIR_P% .PHONY: dist dist-all if %?SUBDIRS% AM_RECURSIVE_TARGETS += dist dist-all endif %?SUBDIRS% dist dist-all: $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' $(am__post_remove_distdir) endif %?TOPDIR_P% ## ------------------------- ## ## Checking a distribution. ## ## ------------------------- ## if %?TOPDIR_P% if %?SUBDIRS% AM_RECURSIVE_TARGETS += distcheck endif %?SUBDIRS% # This target untars the dist file and tries a VPATH configuration. Then # it guarantees that the distribution is self-contained by making another # tarfile. .PHONY: distcheck distcheck: dist case '$(DIST_ARCHIVES)' in \ .tar.gz) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz \| $(am__untar) ;;\ .tar.bz2) \ bzip2 -dc $(distdir).tar.bz2 \| $(am__untar) ;;\ .tar.lz) \ lzip -dc $(distdir).tar.lz \| $(am__untar) ;;\ .tar.xz) \ xz -dc $(distdir).tar.xz \| $(am__untar) ;;\ .tar.Z) \ uncompress -c $(distdir).tar.Z \| $(am__untar) ;;\ .shar.gz) \ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz \| unshar ;;\ .zip) \ unzip $(distdir).zip ;;\ .tar.zst*) \ zstd -dc $(distdir).tar.zst \| $(am__untar) ;;\ esac ## Make the new source tree read-only. Distributions ought to work in ## this case. However, make the top-level directory writable so we ## can make our new subdirs. chmod -R a-w $(distdir) chmod u+w $(distdir) mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst ## Undo the write access. chmod a-w $(distdir) ## With GNU make, the following command will be executed even with "make -n", ## due to the presence of '$(MAKE)'. That is normally all well (and '$(MAKE)' ## is necessary for things like parallel distcheck), but here we don't want ## execution. To avoid MAKEFLAGS parsing hassles, use a witness file that a ## non-'-n' run would have just created. test -d $(distdir)/_build \|\| exit 0; \ ## Compute the absolute path of '_inst'. Strip any leading DOS drive ## to allow DESTDIR installations. Otherwise "$(DESTDIR)$(prefix)" would ## expand to "c:/temp/am-dc-5668/c:/src/package/package-1.0/_inst". dc_install_base=`$(am__cd) $(distdir)/_inst && pwd \| sed -e 's,^[^:\\/]:[\\/],/,'` \ ## We will attempt a DESTDIR install in $dc_destdir. We don't ## create this directory under $dc_install_base, because it would ## create very long directory names. && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ ?DISTCHECK-HOOK? && $(MAKE) $(AM_MAKEFLAGS) distcheck-hook \ ## Parallel BSD make may not start a new shell for each command in a recipe, ## so be sure to 'cd' back to the original directory after this. && am__cwd=`pwd` \ ## If we merely used '$(distdir)/_build' here, "make distcheck" could ## sometimes fail to detect missing files in the distribution tarball, ## especially in those cases where both the generated files and their ## dependencies are explicitly in $(srcdir). See automake bug#18286. && $(am__cd) $(distdir)/_build/sub \ && ../../configure \ ?GETTEXT? --with-included-gettext \ ## Additional flags for configure. $(AM_DISTCHECK_CONFIGURE_FLAGS) \ $(DISTCHECK_CONFIGURE_FLAGS) \ ## At the moment, the code doesn't actually support changes in these --srcdir ## and --prefix values, so don't allow them to be overridden by the user or ## the developer. That used to be allowed, and caused issues in practice ## (in corner-case usages); see automake bug#14991. --srcdir=../.. --prefix="$$dc_install_base" \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ && $(MAKE) $(AM_MAKEFLAGS) check \ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ distuninstallcheck \ ## Make sure the package has proper DESTDIR support (we could not test this ## in the previous install/installcheck/uninstall test, because it's reasonable ## for installcheck to fail in a DESTDIR install). ## We make the '$dc_install_base' read-only because this is where files ## with missing DESTDIR support are likely to be installed. && chmod -R a-w "$$dc_install_base" \ ## The logic here is quite convoluted because we must clean $dc_destdir ## whatever happens (it won't be erased by the next run of distcheck like ## $(distdir) is). && ({ \ ## Build the directory, so we can cd into it even if "make install" ## didn't create it. Use mkdir, not $(MKDIR_P) because we want to ## fail if the directory already exists (PR/413). (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ } \|\| { rm -rf "$$dc_destdir"; exit 1; }) \ && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist \ ## Make sure to remove the dists we created in the test build directory. && rm -rf $(DIST_ARCHIVES) \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ ## Cater to parallel BSD make (see above). && cd "$$am__cwd" \ \|\| exit 1 $(am__post_remove_distdir) @(echo "$(distdir) archives ready for distribution: "; \ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) \| \ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' ## Define distuninstallcheck_listfiles and distuninstallcheck separately ## from distcheck, so that they can be overridden by the user. .PHONY: distuninstallcheck distuninstallcheck_listfiles = find . -type f -print ## The 'dir' file (created by install-info) might still exist after ## uninstall, so we must be prepared to account for it. The following ## check is not 100% strict, but is definitely good enough, and even ## accounts for overridden $(infodir). am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ \| sed 's\|^\./\|$(prefix)/\|' \| grep -v '$(infodir)/dir$$' distuninstallcheck: @test -n '$(distuninstallcheck_dir)' \|\| { \ echo 'ERROR: trying to run $@ with an empty' \ '$$(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ $(am__cd) '$(distuninstallcheck_dir)' \|\| { \ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ exit 1; \ }; \ test `$(am__distuninstallcheck_listfiles) \| wc -l` -eq 0 \ \|\| { echo "ERROR: files left after uninstall:" ; \ if test -n "$(DESTDIR)"; then \ echo " (check DESTDIR support)"; \ fi ; \ $(distuninstallcheck_listfiles) ; \ exit 1; } >&2 ## Define distcleancheck_listfiles and distcleancheck separately ## from distcheck, so that they can be overridden by the user. .PHONY: distcleancheck distcleancheck_listfiles = find . -type f -print distcleancheck: distclean @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi @test `$(distcleancheck_listfiles) \| wc -l` -eq 0 \ \|\| { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 endif %?TOPDIR_P%	22.06 KB	2020-01-01 19:43
📄 footer.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT:	882 B	2020-01-01 19:43
📄 header-vars.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. VPATH = @srcdir@ @SET_MAKE@ ## We used to define this. However, we don't because vendor makes ## (e.g., Solaris, Irix) won't correctly propagate variables that are ## defined in Makefile. This particular variable can't be correctly ## defined by configure (at least, not the current configure), so we ## simply avoid defining it to allow the user to use this feature with ## a vendor make. ## DESTDIR = ## Shell code that determines whether we are running under GNU make. ## ## Why the this needs to be so convoluted? ## ## (1) We can't unconditionally use make functions or special variables ## starting with a dot, as those cause non-GNU implmentations to ## crash hard. ## ## (2) We can't use $(MAKE_VERSION) here, as it is also defined in some ## non-GNU make implementations (e.g., FreeBSD make). But at least ## BSD make does not define the $(CURDIR) variable -- it uses ## $(.CURDIR) instead. ## ## (3) We can't use $(MAKEFILE_LIST) here, as in some situations it ## might cause the shell to die with "Arg list too long" (see ## automake bug#18744). ## ## (4) We can't use $(MAKE_HOST) unconditionally, as it is only ## defined in GNU make 4.0 or later. ## am__is_gnu_make = { \ if test -z '$(MAKELEVEL)'; then \ false; \ elif test -n '$(MAKE_HOST)'; then \ true; \ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ true; \ else \ false; \ fi; \ } ## Shell code that determines whether the current make instance is ## running with a given one-letter option (e.g., -k, -n) that takes ## no argument. am__make_running_with_option = \ case $${target_option-} in \ ?) ;; \ ) echo "am__make_running_with_option: internal error: invalid" \ "target option '$${target_option-}' specified" >&2; \ exit 1;; \ esac; \ has_opt=no; \ sane_makeflags=$$MAKEFLAGS; \ if $(am__is_gnu_make); then \ ## The format of $(MAKEFLAGS) is quite tricky with GNU make; the ## variable $(MFLAGS) behaves much better in that regard. So use it. sane_makeflags=$$MFLAGS; \ else \ ## Non-GNU make: we must rely on $(MAKEFLAGS). This is tricker and more ## brittle, but is the best we can do. case $$MAKEFLAGS in \ ## If we run "make TESTS='snooze nap'", FreeBSD make will export MAKEFLAGS ## to " TESTS=foo\ nap", so that the simpler loop below (on word-split ## $$MAKEFLAGS) would see a "make flag" equal to "nap", and would wrongly ## misinterpret that as and indication that make is running in dry mode. ## This has already happened in practice. So we need this hack. \\[\ \ ]) \ ## Extra indirection with ${bs} required by FreeBSD 8.x make. ## Not sure why (so sorry for the cargo-cult programming here). bs=\\; \ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ \| sed "s/$$bs$$bs[$$bs $$bs ]//g"`;; \ esac; \ fi; \ skip_next=no; \ strip_trailopt () \ { \ flg=`printf '%s\n' "$$flg" \| sed "s/$$1.$$//"`; \ }; \ for flg in $$sane_makeflags; do \ test $$skip_next = yes && { skip_next=no; continue; }; \ case $$flg in \ =\|--) continue;; \ ## ## GNU make 4.0 has changed the format of $MFLAGS, and removed the space ## between an option and its argument (e.g., from "-I dir" to "-Idir"). ## So we need to handle both formats, at least for options valid in GNU ## make. OTOH, BSD make formats $(MAKEFLAGS) by separating all options, ## and separating any option from its argument, so things are easier ## there. ## ## For GNU make and BSD make. -I) strip_trailopt 'I'; skip_next=yes;; \ -I?) strip_trailopt 'I';; \ ## For GNU make >= 4.0. -O) strip_trailopt 'O'; skip_next=yes;; \ -O?) strip_trailopt 'O';; \ ## For GNU make (possibly overkill, this one). -l) strip_trailopt 'l'; skip_next=yes;; \ -l?) strip_trailopt 'l';; \ ## For BSD make. -[dEDm]) skip_next=yes;; \ ## For NetBSD make. -[JT]) skip_next=yes;; \ esac; \ case $$flg in \ $$target_option*) has_opt=yes; break;; \ esac; \ done; \ test $$has_opt = yes ## Shell code that determines whether make is running in "dry mode" ## ("make -n") or not. Useful in rules that invoke make recursively, ## and are thus executed also with "make -n" -- either because they ## are declared as dependencies to '.MAKE' (NetBSD make), or because ## their recipes contain the "$(MAKE)" string (GNU and Solaris make). am__make_dryrun = (target_option=n; $(am__make_running_with_option)) ## Shell code that determines whether make is running in "keep-going mode" ## ("make -k") or not. Useful in rules that must recursively descend into ## subdirectories, and decide whether to stop at the first error or not. am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) ## Some derived variables that have been found to be useful. pkgdatadir = $(datadir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkglibexecdir = $(libexecdir)/@PACKAGE@ am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) ## These are defined because otherwise make on NetBSD V1.1 will print ## (eg): $(NORMAL_INSTALL) expands to empty string. NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : ## dejagnu.am uses these variables. Some users might rely on them too. ?BUILD?build_triplet = @build@ ?HOST?host_triplet = @host@ ?TARGET?target_triplet = @target@	6.24 KB	2020-01-01 19:43
📄 header.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. ## Exactly the same as data.am. include data.am	787 B	2020-01-01 19:43
📄 inst-vars.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 2004-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. if %?FIRST% ## These variables help stripping any $(VPATH) that some ## Make implementations prepend before VPATH-found files. ## The issue is discussed at length in distdir.am. am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" \| sed 's\|.\|.\|g'`; am__vpath_adj = case $$p in \ $(srcdir)/) f=`echo "$$p" \| sed "s\|^$$srcdirstrip/\|\|"`;; \ ) f=$$p;; \ esac; ## Strip all directories. am__strip_dir = f=`echo $$p \| sed -e 's\|^./\|\|'`; ## Number of files to install concurrently. am__install_max = 40 ## Take a $list of nobase files, strip $(srcdir) from them. ## Split apart in setup variable and an action that can be used ## in backticks or in a pipe. am__nobase_strip_setup = \ srcdirstrip=`echo "$(srcdir)" \| sed 's/[].[^$$\\\|]/\\\\&/g'` am__nobase_strip = \ for p in $$list; do echo "$$p"; done \| sed -e "s\|$$srcdirstrip/\|\|" ## Take a $list of nobase files, collect them, indexed by their ## srcdir-stripped dirnames. For up to am__install_max files, output ## a line containing the dirname and the files, space-separated. ## The arbitrary limit helps avoid the quadratic scaling exhibited by ## string concatenation in most shells, and should avoid line length ## limitations, while still offering only negligible performance impact ## through spawning more install commands than absolutely needed. am__nobase_list = $(am__nobase_strip_setup); \ for p in $$list; do echo "$$p $$p"; done \| \ sed "s\| $$srcdirstrip/\| \|;"' / .\//!s/ ./ ./; s,$ .$/[^/]$$,\1,' \| \ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ if (++n[$$2] == $(am__install_max)) \ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ END { for (dir in files) print dir, files[dir] }' ## Collect up to 40 files per line from stdin. am__base_list = \ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' \| \ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' ## A shell code fragment to uninstall files from a given directory. ## It expects the $dir and $files shell variables to be defined respectively ## to the directory where the files to be removed are, and to the list of ## such files. am__uninstall_files_from_dir = { \ ## Some rm implementations complain if 'rm -f' is used without arguments. test -z "$$files" \ ## At least Solaris /bin/sh still lacks 'test -e', so we use the multiple ## tests below instead. We expect $dir to be either non-existent or a ## directory, so the failure we'll experience if it is a regular file ## is indeed desired and welcome (better to fail loudly thasn silently). \|\| { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ \|\| { echo " ( cd '$$dir' && rm -f" $$files ")"; \ $(am__cd) "$$dir" && rm -f $$files; }; \ } endif %?FIRST%	3.39 KB	2020-01-01 19:43
📄 install.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 2001-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. ## ----------------------------------------- ## ## installdirs -- Creating the installdirs. ## ## ----------------------------------------- ## ## The reason we loop over %am__installdirs% (instead of simply running ## $(MKDIR_P) %am__installdirs%) is that directories variable such as ## "$(DESTDIR)$(mydir)" can potentially expand to "" if $(mydir) is ## conditionally defined. BTW, those directories are quoted in order ## to support installation paths with spaces. if %?SUBDIRS% .PHONY: installdirs installdirs-am RECURSIVE_TARGETS += installdirs-recursive installdirs: installdirs-recursive installdirs-am:%installdirs-local% ?am__installdirs? for dir in %am__installdirs%; do \ ?am__installdirs? test -z "$$dir" \|\| $(MKDIR_P) "$$dir"; \ ?am__installdirs? done else !%?SUBDIRS% .PHONY: installdirs installdirs:%installdirs-local% ?am__installdirs? for dir in %am__installdirs%; do \ ?am__installdirs? test -z "$$dir" \|\| $(MKDIR_P) "$$dir"; \ ?am__installdirs? done endif !%?SUBDIRS% ## ----------------- ## ## Install targets. ## ## ----------------- ## .PHONY: install install-exec install-data uninstall .PHONY: install-exec-am install-data-am uninstall-am if %?SUBDIRS% RECURSIVE_TARGETS += install-data-recursive install-exec-recursive \ install-recursive uninstall-recursive install:%maybe_BUILT_SOURCES% install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive else !%?SUBDIRS% install:%maybe_BUILT_SOURCES% install-am install-exec: install-exec-am install-data: install-data-am uninstall: uninstall-am endif !%?SUBDIRS% if %?maybe_BUILT_SOURCES% .MAKE: install endif %?maybe_BUILT_SOURCES% .MAKE .PHONY: install-am install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am .PHONY: installcheck ?SUBDIRS?installcheck: installcheck-recursive ?!SUBDIRS?installcheck: installcheck-am ?!SUBDIRS?.PHONY: installcheck-am ?!SUBDIRS?installcheck-am: ## If you ever modify this, keep in mind that INSTALL_PROGRAM is used ## in subdirectories, so never set it to a value relative to the top ## directory. .MAKE .PHONY: install-strip install-strip: ## Beware that there are two variables used to install programs: ## INSTALL_PROGRAM is used for ordinary _PROGRAMS ## install_sh_PROGRAM is used for nobase__PROGRAMS (because install-sh ## creates directories) ## It's OK to override both with INSTALL_STRIP_PROGRAM, because ## INSTALL_STRIP_PROGRAM uses install-sh (see m4/strip.m4 for a rationale). ## ## Use double quotes for the *_PROGRAM settings because we might need to ## interpolate some backquotes at runtime. ## ## The case for empty $(STRIP) is separate so that it is quoted correctly for ## multiple words, but does not expand to an empty words if STRIP is empty. if test -z '$(STRIP)'; then \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ install; \ else \ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ fi	3.9 KB	2020-01-01 19:43
📄 java.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1998-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. ## ---------- ## ## Building. ## ## ---------- ## if %?FIRST% JAVAC = javac CLASSPATH_ENV = CLASSPATH=$(JAVAROOT):$(srcdir)/$(JAVAROOT)$${CLASSPATH:+":$$CLASSPATH"} JAVAROOT = $(top_builddir) endif %?FIRST% class%NDIR%.stamp: $(am__java_sources) @list1='$?'; list2=; if test -n "$$list1"; then \ for p in $$list1; do \ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ list2="$$list2 $$d$$p"; \ done; \ echo '$(CLASSPATH_ENV) $(JAVAC) -d $(JAVAROOT) $(AM_JAVACFLAGS) $(JAVACFLAGS) '"$$list2"; \ $(CLASSPATH_ENV) $(JAVAC) -d $(JAVAROOT) $(AM_JAVACFLAGS) $(JAVACFLAGS) $$list2; \ else :; fi echo timestamp > $@ ## ------------ ## ## Installing. ## ## ------------ ## if %?INSTALL% am__installdirs += "$(DESTDIR)$(%NDIR%dir)" ?EXEC?.PHONY install-exec-am: install-%DIR%JAVA ?!EXEC?.PHONY install-data-am: install-%DIR%JAVA install-%DIR%JAVA: class%NDIR%.stamp @$(NORMAL_INSTALL) ## A single .java file can be compiled into multiple .class files. So ## we just install all the .class files that got built into this ## directory. This is not optimal, but will have to do for now. @test -n "$(%DIR%_JAVA)" && test -n "$(%NDIR%dir)" \|\| exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)"; \ set x .class; shift; test "$$1" != ".class" \|\| exit 0; \ echo " $(INSTALL_DATA)" "$$@" "'$(DESTDIR)$(%NDIR%dir)/$$p'"; \ $(INSTALL_DATA) "$$@" "$(DESTDIR)$(%NDIR%dir)" endif %?INSTALL% ## -------------- ## ## Uninstalling. ## ## -------------- ## if %?INSTALL% .PHONY uninstall-am: uninstall-%DIR%JAVA uninstall-%DIR%JAVA: @$(NORMAL_UNINSTALL) @test -n "$(%DIR%_JAVA)" && test -n "$(%NDIR%dir)" \|\| exit 0; \ set x .class; shift; test "$$1" != ".class" \|\| exit 0; \ echo " ( cd '$(DESTDIR)$(%NDIR%dir)' && rm -f" "$$@" ")"; \ cd "$(DESTDIR)$(%NDIR%dir)" && rm -f "$$@" endif %?INSTALL% ## ---------- ## ## Cleaning. ## ## ---------- ## .PHONY clean-am: clean-%NDIR%JAVA clean-%NDIR%JAVA: -rm -f *.class class%NDIR%.stamp ## -------------- ## ## Distributing. ## ## -------------- ## if %?DIST% DIST_COMMON += %DISTVAR% endif %?DIST%	2.79 KB	2020-01-01 19:43
📄 lang-compile.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 2001-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. ## This file is read once per language, not per extension. ## ------------------------- ## ## Preprocessed Fortran 77. ## ## ------------------------- ## ## We also handle the case of preprocessing '.F' files into '.f' files. if %?PPF77% .F.f: $(F77COMPILE) -F $< endif %?PPF77% ## -------- ## ## Ratfor. ## ## -------- ## ## We also handle the case of preprocessing `.r' files into `.f' files. if %?RATFOR% .r.f: $(RCOMPILE) -F $< endif %?RATFOR%	1.17 KB	2020-01-01 19:43
📄 lex.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 2001-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. ## See the comment about am__skipyacc in yacc.am. if %?MAINTAINER-MODE% if %?FIRST% @MAINTAINER_MODE_FALSE@am__skiplex = test -f $@ \|\| endif %?FIRST% endif %?MAINTAINER-MODE% ?GENERIC?%EXT%%DERIVED-EXT%: ?!GENERIC?%OBJ%: %SOURCE% ?GENERIC? %VERBOSE%$(am__skiplex) $(SHELL) $(YLWRAP) %SOURCE% $(LEX_OUTPUT_ROOT).c %OBJ% -- %COMPILE% ?!GENERIC? %VERBOSE% \ ?!GENERIC??DIST_SOURCE? $(am__skiplex) \ ## For non-suffix rules, we must emulate a VPATH search on %SOURCE%. ?!GENERIC? $(SHELL) $(YLWRAP) `test -f '%SOURCE%' \|\| echo '$(srcdir)/'`%SOURCE% $(LEX_OUTPUT_ROOT).c %OBJ% -- %COMPILE%	1.29 KB	2020-01-01 19:43
📄 library.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. %LIBRARY%: $(%XLIBRARY%_OBJECTS) $(%XLIBRARY%_DEPENDENCIES) $(EXTRA_%XLIBRARY%_DEPENDENCIES) %DIRSTAMP% %SILENT%-rm -f %LIBRARY% %VERBOSE%$(%XLIBRARY%_AR) %LIBRARY% $(%XLIBRARY%_OBJECTS) $(%XLIBRARY%_LIBADD) %SILENT%$(RANLIB) %LIBRARY%	977 B	2020-01-01 19:43
📄 libs.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. if %?INSTALL% include inst-vars.am endif %?INSTALL% ## ------------ ## ## Installing. ## ## ------------ ## if %?INSTALL% am__installdirs += "$(DESTDIR)$(%NDIR%dir)" ?EXEC?.PHONY install-exec-am: install-%DIR%LIBRARIES ?!EXEC?.PHONY install-data-am: install-%DIR%LIBRARIES install-%DIR%LIBRARIES: $(%DIR%_LIBRARIES) @$(NORMAL_INSTALL) if %?BASE% ## Funny invocation because Makefile variable can be empty, leading to ## a syntax error in sh. @list='$(%DIR%_LIBRARIES)'; test -n "$(%NDIR%dir)" \|\| list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" \|\| { \ echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)" \|\| exit 1; \ echo " $(INSTALL_DATA) $$list2 '$(DESTDIR)$(%NDIR%dir)'"; \ $(INSTALL_DATA) $$list2 "$(DESTDIR)$(%NDIR%dir)" \|\| exit $$?; } else !%?BASE% ## Funny invocation because Makefile variable can be empty, leading to ## a syntax error in sh. @list='$(%DIR%_LIBRARIES)'; test -n "$(%NDIR%dir)" \|\| list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)" \|\| exit 1; \ fi; \ $(am__nobase_list) \| while read dir files; do \ xfiles=; for p in $$files; do \ if test -f "$$p"; then xfiles="$$xfiles $$p"; else :; fi; done; \ test -z "$$xfiles" \|\| { \ test "x$$dir" = x. \|\| { \ echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)/$$dir"; }; \ echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \ $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(%NDIR%dir)/$$dir" \|\| exit $$?; }; \ done endif !%?BASE% ## We do two loops here so that $(POST_INSTALL) can be empty. If we ## merge the two loops, we get a syntax error from sh. Anyway, having ## $(POST_INSTALL) in the middle of the loop essentially renders it ## useless; sh never actually executes this command. Read the GNU ## Standards for a little enlightenment on this. @$(POST_INSTALL) @list='$(%DIR%_LIBRARIES)'; test -n "$(%NDIR%dir)" \|\| list=; \ for p in $$list; do \ if test -f $$p; then \ ?BASE? $(am__strip_dir) \ ?!BASE? f=$$p; \ ## Must ranlib after installing because mod time changes. ## cd to target directory because AIX ranlib messes up with whitespace ## in the argument. echo " ( cd '$(DESTDIR)$(%NDIR%dir)' && $(RANLIB) $$f )"; \ ( cd "$(DESTDIR)$(%NDIR%dir)" && $(RANLIB) $$f ) \|\| exit $$?; \ else :; fi; \ done endif %?INSTALL% ## -------------- ## ## Uninstalling. ## ## -------------- ## if %?INSTALL% .PHONY uninstall-am: uninstall-%DIR%LIBRARIES uninstall-%DIR%LIBRARIES: @$(NORMAL_UNINSTALL) @list='$(%DIR%_LIBRARIES)'; test -n "$(%NDIR%dir)" \|\| list=; \ ?BASE? files=`for p in $$list; do echo $$p; done \| sed -e 's\|^.*/\|\|'`; \ ?!BASE? $(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \ dir='$(DESTDIR)$(%NDIR%dir)'; $(am__uninstall_files_from_dir) endif %?INSTALL% ## ---------- ## ## Cleaning. ## ## ---------- ## .PHONY clean-am: clean-%DIR%LIBRARIES clean-%DIR%LIBRARIES: -test -z "$(%DIR%_LIBRARIES)" \|\| rm -f $(%DIR%_LIBRARIES)	3.8 KB	2020-01-01 19:43
📄 libtool.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. .PHONY: mostlyclean-libtool clean-libtool distclean-libtool mostlyclean-am: mostlyclean-libtool mostlyclean-libtool: -rm -f *.lo clean-am: clean-libtool clean-libtool: ?LTRMS?%LTRMS% ?TOPDIR_P?distclean-am: distclean-libtool ?TOPDIR_P?distclean-libtool: ?TOPDIR_P? -rm -f libtool config.lt	1.01 KB	2020-01-01 19:43
📄 lisp.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1996-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. if %?INSTALL% include inst-vars.am endif %?INSTALL% ## ---------- ## ## Building. ## ## ---------- ## .el.elc: ## We add $(builddir) and $(srcdir) to load-path, so that any '.el' files ## that $< depends upon can be found (including generated ones). ## We prefer files from the build directory to those from the source ## directory, in true VPATH spirit. ## The destination file is normally determined by appending "c" to the ## input (which would erronously put it in $(srcdir) in VPATH builds), ## so we override that, too. if test '$(EMACS)' != no; then \ am__dir=. am__subdir_includes=''; \ case $@ in /) \ am__dir=`echo '$@' \| sed 's,/[^/]$$,,'`; \ am__subdir_includes="-L $$am__dir -L $(srcdir)/$$am__dir"; \ esac; \ ## Emacs byte-compilation won't create this automatically, sadly. test -d "$$am__dir" \|\| $(MKDIR_P) "$$am__dir" \|\| exit 1; \ $(EMACS) --batch \ $(AM_ELCFLAGS) $(ELCFLAGS) \ $$am__subdir_includes -L $(builddir) -L $(srcdir) \ --eval '$(am__emacs_byte_compile_setup)' \ -f batch-byte-compile '$<'; \ else :; fi if %?FIRST% ## In Automake 1.16, byte compilation was changed to use ## byte-compile-dest-file-function, but that doesn't exist in Emacs ## versions earlier than 25, which are still widespread (likely ## permanently). There's no harm in supporting the older versions, which ## require defining the byte-compile-file defun, so do so. ## Otherwise, various of our lisp-related tests fail with the older ## Emacsen, since they would try to byte-compile into a read-only srcdir. ## ## This is used, single-quoted, in the shell sequence above. ## So use (quote) instead of another single quote in the Lisp. ## am__emacs_byte_compile_setup = \ (if (boundp (quote byte-compile-dest-file-function)) \ (setq byte-compile-dest-file-function (lambda (_) "$@")) \ (defun byte-compile-dest-file (_) "$@") \ ) ## Just to be clear: that "$@" above is an Elisp string of the make target. endif %?FIRST% ## ------------ ## ## Installing. ## ## ------------ ## if %?INSTALL% am__installdirs += "$(DESTDIR)$(%NDIR%dir)" ?BASE?%DIR%LISP_INSTALL = $(INSTALL_DATA) ?!BASE?%DIR%LISP_INSTALL = $(install_sh_DATA) ?EXEC?.PHONY install-exec-am: install-%DIR%LISP ?!EXEC?.PHONY install-data-am: install-%DIR%LISP install-%DIR%LISP: $(%DIR%_LISP) $(ELCFILES) @$(NORMAL_INSTALL) ## Do not install anything if EMACS was not found. @if test "$(EMACS)" != no && test -n "$(%NDIR%dir)"; then \ ?!BASE? $(am__vpath_adj_setup) \ ## Funny invocation because Makefile variable can be empty, leading to ## a syntax error in sh. list='$(%DIR%_LISP)'; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)" \|\| exit 1; \ fi; \ for p in $$list; do \ ## A lisp file can be in the source directory or the build directory. if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ?BASE? $(am__strip_dir) \ ?!BASE? $(am__vpath_adj) \ echo " $(%DIR%LISP_INSTALL) '$$d$$p' '$(DESTDIR)$(%NDIR%dir)/$$f'"; \ $(%DIR%LISP_INSTALL) "$$d$$p" "$(DESTDIR)$(%NDIR%dir)/$$f" \|\| exit $$?; \ ## Only install .elc file if it exists. if test -f $${p}c; then \ echo " $(%DIR%LISP_INSTALL) '$${p}c' '$(DESTDIR)$(%NDIR%dir)/$${f}c'"; \ $(%DIR%LISP_INSTALL) "$${p}c" "$(DESTDIR)$(%NDIR%dir)/$${f}c" \|\| exit $$?; \ else : ; fi; \ done; \ else : ; fi endif %?INSTALL% ## -------------- ## ## Uninstalling. ## ## -------------- ## if %?INSTALL% .PHONY uninstall-am: uninstall-%DIR%LISP uninstall-%DIR%LISP: @$(NORMAL_UNINSTALL) ## Do not uninstall anything if EMACS was not found. @test "$(EMACS)" != no && test -n "$(%NDIR%dir)" \|\| exit 0; \ list='$(%DIR%_LISP)'; \ ?BASE? files=`for p in $$list; do echo $$p; done \| sed -e 's\|^./\|\|'`; \ ?!BASE? $(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \ files="$$files "`echo "$$files" \| sed 's\|$$\|c\|'`; \ dir='$(DESTDIR)$(%NDIR%dir)'; $(am__uninstall_files_from_dir) endif %?INSTALL% ## ---------- ## ## Cleaning. ## ## ---------- ## .PHONY clean-am: clean-lisp clean-lisp: -rm -f $(ELCFILES) ## -------------- ## ## Distributing. ## ## -------------- ## if %?DIST% DIST_COMMON += %DISTVAR% endif %?DIST%	4.86 KB	2020-01-06 05:55
📄 ltlib.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. if %?INSTALL% include inst-vars.am endif %?INSTALL% ## ------------ ## ## Installing. ## ## ------------ ## if %?INSTALL% am__installdirs += "$(DESTDIR)$(%NDIR%dir)" ?EXEC?.PHONY install-exec-am: install-%DIR%LTLIBRARIES ?!EXEC?.PHONY install-data-am: install-%DIR%LTLIBRARIES install-%DIR%LTLIBRARIES: $(%DIR%_LTLIBRARIES) @$(NORMAL_INSTALL) if %?BASE% ## Funny invocation because Makefile variable can be empty, leading to ## a syntax error in sh. @list='$(%DIR%_LTLIBRARIES)'; test -n "$(%NDIR%dir)" \|\| list=; \ list2=; for p in $$list; do \ if test -f $$p; then \ list2="$$list2 $$p"; \ else :; fi; \ done; \ test -z "$$list2" \|\| { \ echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)" \|\| exit 1; \ ## Note that we explicitly set the libtool mode. This avoids any lossage ## if the program doesn't have a name that libtool expects. ## Use INSTALL and not INSTALL_DATA because libtool knows the right ## permissions to use. ?LIBTOOL? echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(%NDIR%dir)'"; \ ?LIBTOOL? $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(%NDIR%dir)"; \ ?!LIBTOOL? echo " $(INSTALL) $(INSTALL_STRIP_FLAG) $$list '$(DESTDIR)$(%NDIR%dir)'"; \ ?!LIBTOOL? $(INSTALL) $(INSTALL_STRIP_FLAG) $$list "$(DESTDIR)$(%NDIR%dir)"; \ } else !%?BASE% @list='$(%DIR%_LTLIBRARIES)'; test -n "$(%NDIR%dir)" \|\| list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)" \|\| exit 1; \ fi; \ for p in $$list; do if test -f "$$p"; then echo "$$p $$p"; else :; fi; done \| \ sed '/ .\//!s/ ./ ./; s,$ .$/[^/]$$,\1,' \| \ $(AWK) 'BEGIN { cur = "." } \ { if ($$2 == cur) { files = files " " $$1 } \ else { print cur, files; files = $$1; cur = $$2 } } \ END { print cur, files }' \| \ while read dir files; do \ test -z "$$files" \|\| { \ test "x$$dir" = x. \|\| { \ echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)/$$dir"; }; \ ## Note that we explicitly set the libtool mode. This avoids any lossage ## if the program doesn't have a name that libtool expects. ## Use INSTALL and not INSTALL_DATA because libtool knows the right ## permissions to use. ?LIBTOOL? echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$files '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \ ?LIBTOOL? $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$files "$(DESTDIR)$(%NDIR%dir)/$$dir" \|\| exit $$?; \ ?!LIBTOOL? echo " $(INSTALL) $(INSTALL_STRIP_FLAG) $$files '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \ ?!LIBTOOL? $(INSTALL) $(INSTALL_STRIP_FLAG) $$files "$(DESTDIR)$(%NDIR%dir)/$$dir" \|\| exit $$?; \ }; \ done endif !%?BASE% endif %?INSTALL% ## -------------- ## ## Uninstalling. ## ## -------------- ## if %?INSTALL% .PHONY uninstall-am: uninstall-%DIR%LTLIBRARIES uninstall-%DIR%LTLIBRARIES: @$(NORMAL_UNINSTALL) @list='$(%DIR%_LTLIBRARIES)'; test -n "$(%NDIR%dir)" \|\| list=; \ for p in $$list; do \ ?BASE? $(am__strip_dir) \ ?!BASE? f=$$p; \ ?LIBTOOL? echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(%NDIR%dir)/$$f'"; \ ?LIBTOOL? $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(%NDIR%dir)/$$f"; \ ?!LIBTOOL? echo " rm -f '$(DESTDIR)$(%NDIR%dir)/$$f'"; \ ?!LIBTOOL? rm -f "$(DESTDIR)$(%NDIR%dir)/$$f"; \ done endif %?INSTALL% ## ---------- ## ## Cleaning. ## ## ---------- ## .PHONY clean-am: clean-%DIR%LTLIBRARIES clean-%DIR%LTLIBRARIES: -test -z "$(%DIR%_LTLIBRARIES)" \|\| rm -f $(%DIR%_LTLIBRARIES) ## 'so_locations' files are created by some linkers (IRIX, OSF) when ## building a shared object. Libtool places these files in the ## directory where the shared object is created. @list='$(%DIR%_LTLIBRARIES)'; \ locs=`for p in $$list; do echo $$p; done \| \ sed 's\|^[^/]$$\|.\|; s\|/[^/]$$\|\|; s\|$$\|/so_locations\|' \| \ sort -u`; \ test -z "$$locs" \|\| { \ echo rm -f $${locs}; \ rm -f $${locs}; \ }	4.88 KB	2020-01-01 19:43
📄 ltlibrary.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. %LTLIBRARY%: $(%XLTLIBRARY%_OBJECTS) $(%XLTLIBRARY%_DEPENDENCIES) $(EXTRA_%XLTLIBRARY%_DEPENDENCIES) %DIRSTAMP% %VERBOSE%$(%XLINK%) %RPATH% $(%XLTLIBRARY%_OBJECTS) $(%XLTLIBRARY%_LIBADD) $(LIBS)	934 B	2020-01-01 19:43
📄 mans-vars.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. NROFF = nroff ## We don't really need this, but we use it in case we ever want to ## support noinst_MANS. MANS = %MANS%	858 B	2020-01-01 19:43
📄 mans.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1998-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. include inst-vars.am man%SECTION%dir = $(mandir)/man%SECTION% ## ------------ ## ## Installing. ## ## ------------ ## ## MANS primary are always installed in mandir, hence install-data ## is hard coded. .PHONY: install-man ?INSTALL-MAN?install-data-am: install-man ?INSTALL-MAN?am__installdirs += "$(DESTDIR)$(man%SECTION%dir)" .PHONY install-man: install-man%SECTION% install-man%SECTION%: %DEPS% @$(NORMAL_INSTALL) if %?NOTRANS_MANS% ## Handle MANS with notrans_ prefix @list1='%NOTRANS_SECT_LIST%'; \ ?!HAVE_NOTRANS? list2=''; \ ?HAVE_NOTRANS? list2='%NOTRANS_LIST%'; \ test -n "$(man%SECTION%dir)" \ && test -n "`echo $$list1$$list2`" \ \|\| exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(man%SECTION%dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(man%SECTION%dir)" \|\| exit 1; \ { for i in $$list1; do echo "$$i"; done; \ ## Extract all items from notrans_man_MANS that should go in this section. ## This must be done dynamically to support conditionals. if test -n "$$list2"; then \ for i in $$list2; do echo "$$i"; done \ ## Accept for 'man1' files like 'foo.1c' but not 'sub.1/foo.2' or 'foo-2.1.4'. \| sed -n '/\.%SECTION%[a-z]$$/p'; \ fi; \ ## Extract basename of manpage, change the extension if needed. } \| while read p; do \ ## Find the file. if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done \| \ ## Extract the basename of the man page and change the extension if needed. sed 'n;s,./,,;p;s,\.[^%SECTION%][0-9a-z]$$,.%SECTION%,' \| \ sed 'N;N;s,\n, ,g' \| { \ ## We now have a list "sourcefile basename installed-name". list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man%SECTION%dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man%SECTION%dir)/$$inst" \|\| exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done \| $(am__base_list) \| \ while read files; do \ test -z "$$files" \|\| { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man%SECTION%dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man%SECTION%dir)" \|\| exit $$?; }; \ done; } endif %?NOTRANS_MANS% if %?TRANS_MANS% ## Handle MANS without notrans_ prefix @list1='%TRANS_SECT_LIST%'; \ ?!HAVE_TRANS? list2=''; \ ?HAVE_TRANS? list2='%TRANS_LIST%'; \ test -n "$(man%SECTION%dir)" \ && test -n "`echo $$list1$$list2`" \ \|\| exit 0; \ echo " $(MKDIR_P) '$(DESTDIR)$(man%SECTION%dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(man%SECTION%dir)" \|\| exit 1; \ { for i in $$list1; do echo "$$i"; done; \ ## Extract all items from notrans_man_MANS that should go in this section. ## This must be done dynamically to support conditionals. if test -n "$$list2"; then \ for i in $$list2; do echo "$$i"; done \ ## Accept for 'man1' files like `foo.1c' but not 'sub.1/foo.2' or 'foo-2.1.4'. \| sed -n '/\.%SECTION%[a-z]$$/p'; \ fi; \ ## Extract basename of manpage, change the extension if needed. } \| while read p; do \ ## Find the file. if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; echo "$$p"; \ done \| \ ## Extract the basename of the man page and change the extension if needed. sed -e 'n;s,./,,;p;h;s,.\.,,;s,^[^%SECTION%][0-9a-z]$$,%SECTION%,;x' \ -e 's,\.[0-9a-z]$$,,;$(transform);G;s,\n,.,' \| \ sed 'N;N;s,\n, ,g' \| { \ ## We now have a list "sourcefile basename installed-name". list=; while read file base inst; do \ if test "$$base" = "$$inst"; then list="$$list $$file"; else \ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man%SECTION%dir)/$$inst'"; \ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man%SECTION%dir)/$$inst" \|\| exit $$?; \ fi; \ done; \ for i in $$list; do echo "$$i"; done \| $(am__base_list) \| \ while read files; do \ test -z "$$files" \|\| { \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man%SECTION%dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(man%SECTION%dir)" \|\| exit $$?; }; \ done; } endif %?TRANS_MANS% ## -------------- ## ## Uninstalling. ## ## -------------- ## .PHONY: uninstall-man ?INSTALL-MAN?uninstall-am: uninstall-man .PHONY uninstall-man: uninstall-man%SECTION% uninstall-man%SECTION%: @$(NORMAL_UNINSTALL) if %?NOTRANS_MANS% ## Handle MANS with notrans_ prefix @list='%NOTRANS_SECT_LIST%'; test -n "$(man%SECTION%dir)" \|\| exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ ## Extract all items from notrans_man_MANS that should go in this section. ## This must be done dynamically to support conditionals. ?HAVE_NOTRANS? l2='%NOTRANS_LIST%'; for i in $$l2; do echo "$$i"; done \| \ ## Accept for 'man1' files like 'foo.1c' but not 'sub.1/foo.2' or 'foo-2.1.4'. ?HAVE_NOTRANS? sed -n '/\.%SECTION%[a-z]$$/p'; \ ## Extract basename of manpage, change the extension if needed. } \| sed 's,./,,;s,\.[^%SECTION%][0-9a-z]$$,.%SECTION%,'`; \ dir='$(DESTDIR)$(man%SECTION%dir)'; $(am__uninstall_files_from_dir) endif %?NOTRANS_MANS% if %?TRANS_MANS% ## Handle MANS without notrans_ prefix @list='%TRANS_SECT_LIST%'; test -n "$(man%SECTION%dir)" \|\| exit 0; \ files=`{ for i in $$list; do echo "$$i"; done; \ ## Extract all items from man_MANS that should go in this section. ## This must be done dynamically to support conditionals. ?HAVE_TRANS? l2='%TRANS_LIST%'; for i in $$l2; do echo "$$i"; done \| \ ## Accept for 'man1' files like 'foo.1c' but not 'sub.1/foo.2' or 'foo-2.1.4'. ?HAVE_TRANS? sed -n '/\.%SECTION%[a-z]$$/p'; \ ## Extract basename of manpage, run it through the program rename ## transform, and change the extension if needed. } \| sed -e 's,./,,;h;s,.\.,,;s,^[^%SECTION%][0-9a-z]$$,%SECTION%,;x' \ -e 's,\.[0-9a-z]$$,,;$(transform);G;s,\n,.,'`; \ dir='$(DESTDIR)$(man%SECTION%dir)'; $(am__uninstall_files_from_dir) endif %?TRANS_MANS%	6.34 KB	2020-01-01 19:43
📄 program.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. %PROGRAM%%EXEEXT%: $(%XPROGRAM%_OBJECTS) $(%XPROGRAM%_DEPENDENCIES) $(EXTRA_%XPROGRAM%_DEPENDENCIES) %DIRSTAMP% ## Remove program before linking. Otherwise the link will fail if the ## program is running somewhere. FIXME: this could be a loss if ## you're using an incremental linker. Maybe we should think twice? ## Or maybe not... sadly, incremental linkers are rarer than losing ## systems. @rm -f %PROGRAM%%EXEEXT% %VERBOSE%$(%XLINK%) $(%XPROGRAM%_OBJECTS) $(%XPROGRAM%_LDADD) $(LIBS)	1.2 KB	2020-01-01 19:43
📄 progs.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. ## ------------ ## ## Installing. ## ## ------------ ## if %?INSTALL% am__installdirs += "$(DESTDIR)$(%NDIR%dir)" ?EXEC?.PHONY install-exec-am: install-%DIR%PROGRAMS ?!EXEC?.PHONY install-data-am: install-%DIR%PROGRAMS install-%DIR%PROGRAMS: $(%DIR%_PROGRAMS) @$(NORMAL_INSTALL) ## Funny invocation because Makefile variable can be empty, leading to ## a syntax error in sh. @list='$(%DIR%_PROGRAMS)'; test -n "$(%NDIR%dir)" \|\| list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)" \|\| exit 1; \ fi; \ for p in $$list; do echo "$$p $$p"; done \| \ ## On Cygwin with libtool test won't see 'foo.exe' but instead 'foo'. ## So we check for both. sed 's/$(EXEEXT)$$//' \| \ while read p p1; do if test -f $$p \ ?LIBTOOL? \|\| test -f $$p1 \ ; then echo "$$p"; echo "$$p"; else :; fi; \ done \| \ ## We now have a list of sourcefile pairs, separated by newline. ## Turn that into "sourcefile source_base target_dir xformed_target_base", ## with newlines being turned into spaces in a second step. sed -e 'p;s,./,,;n;h' \ ?BASE? -e 's\|.\|.\|' \ ?!BASE? -e 's\|[^/]$$\|\|; s\|^$$\|.\|' \ -e 'p;x;s,./,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' \| \ sed 'N;N;N;s,\n, ,g' \| \ ## The following awk script turns that into one line containing directories ## and then lines of 'type target_name_or_directory sources ...', with type ## 'd' designating directories, and 'f' files. $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) files[d] = files[d] " " $$1; \ else { print "f", $$3 "/" $$4, $$1; } } \ END { for (d in files) print "f", d, files[d] }' \| \ while read type dir files; do \ ?!BASE? case $$type in \ ?!BASE? d) echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \ ?!BASE? $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)/$$dir" \|\| exit $$?;; \ ?!BASE? f) \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" \|\| { \ ?!LIBTOOL? echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(%NDIR%dir)$$dir'"; \ ?!LIBTOOL? $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(%NDIR%dir)$$dir" \|\| exit $$?; \ ## Note that we explicitly set the libtool mode. This avoids any ## lossage if the install program doesn't have a name that libtool ## expects. ?LIBTOOL? echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(%NDIR%dir)$$dir'"; \ ?LIBTOOL? $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(%NDIR%dir)$$dir" \|\| exit $$?; \ } \ ?!BASE? ;; esac \ ; done endif %?INSTALL% ## -------------- ## ## Uninstalling. ## ## -------------- ## if %?INSTALL% .PHONY uninstall-am: uninstall-%DIR%PROGRAMS uninstall-%DIR%PROGRAMS: @$(NORMAL_UNINSTALL) @list='$(%DIR%_PROGRAMS)'; test -n "$(%NDIR%dir)" \|\| list=; \ files=`for p in $$list; do echo "$$p"; done \| \ ## Remove any leading directory before applying $(transform), ## but keep the directory part in the hold buffer, in order to ## reapply it again afterwards in the nobase case. Append $(EXEEXT). sed -e 'h;s,^./,,;s/$(EXEEXT)$$//;$(transform)' \ -e 's/$$/$(EXEEXT)/' \ ?!BASE? -e 'x;s,[^/]$$,,;G;s,\n,,' \ `; \ test -n "$$list" \|\| exit 0; \ echo " ( cd '$(DESTDIR)$(%NDIR%dir)' && rm -f" $$files ")"; \ cd "$(DESTDIR)$(%NDIR%dir)" && rm -f $$files endif %?INSTALL% ## ---------- ## ## Cleaning. ## ## ---------- ## .PHONY clean-am: clean-%DIR%PROGRAMS clean-%DIR%PROGRAMS: ?!LIBTOOL? -test -z "$(%DIR%_PROGRAMS)" \|\| rm -f $(%DIR%_PROGRAMS) ## Under Cygwin, we build 'program$(EXEEXT)'. However, if this ## program uses a Libtool library, Libtool will move it in ## '_libs/program$(EXEEXT)' and create a 'program' wrapper (without ## '$(EXEEXT)'). Therefore, if Libtool is used, we must try to erase ## both 'program$(EXEEXT)' and 'program'. ## Cleaning the '_libs/' or '.libs/' directory is done from clean-libtool. ## FIXME: In the future (i.e., when it works) it would be nice to delegate ## this task to "libtool --mode=clean". ?LIBTOOL? @list='$(%DIR%_PROGRAMS)'; test -n "$$list" \|\| exit 0; \ ?LIBTOOL? echo " rm -f" $$list; \ ?LIBTOOL? rm -f $$list \|\| exit $$?; \ ?LIBTOOL? test -n "$(EXEEXT)" \|\| exit 0; \ ?LIBTOOL? list=`for p in $$list; do echo "$$p"; done \| sed 's/$(EXEEXT)$$//'`; \ ?LIBTOOL? echo " rm -f" $$list; \ ?LIBTOOL? rm -f $$list ## ---------- ## ## Checking. ## ## ---------- ## if %?CK-OPTS% .PHONY installcheck-am: installcheck-%DIR%PROGRAMS installcheck-%DIR%PROGRAMS: $(%DIR%_PROGRAMS) bad=0; pid=$$$$; list="$(%DIR%_PROGRAMS)"; for p in $$list; do \ case ' $(AM_INSTALLCHECK_STD_OPTIONS_EXEMPT) ' in \ ## Match $(srcdir)/$$p in addition to $$p because Sun make might rewrite ## filenames in AM_INSTALLCHECK_STD_OPTIONS_EXEMPT during VPATH builds. " $$p " \| " $(srcdir)/$$p ") continue;; \ esac; \ ## Strip the directory and $(EXEEXT) before applying $(transform). f=`echo "$$p" \| \ sed 's,^./,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ ## Insert the directory back if nobase_ is used. ?!BASE? f=`echo "$$p" \| sed 's\|[^/]$$\|\|'`"$$f"; \ for opt in --help --version; do \ if "$(DESTDIR)$(%NDIR%dir)/$$f" $$opt >c$${pid}_.out \ 2>c$${pid}_.err </dev/null \ && test -n "`cat c$${pid}_.out`" \ && test -z "`cat c$${pid}_.err`"; then :; \ else echo "$$f does not support $$opt" 1>&2; bad=1; fi; \ done; \ done; rm -f c$${pid}_.???; exit $$bad endif %?CK-OPTS%	6.24 KB	2020-01-01 19:43
📄 python.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1999-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. if %?INSTALL% include inst-vars.am endif %?INSTALL% ?FIRST?am__py_compile = PYTHON=$(PYTHON) $(SHELL) $(py_compile) ## ------------ ## ## Installing. ## ## ------------ ## if %?INSTALL% am__installdirs += "$(DESTDIR)$(%NDIR%dir)" ?EXEC?.PHONY install-exec-am: install-%DIR%PYTHON ?!EXEC?.PHONY install-data-am: install-%DIR%PYTHON install-%DIR%PYTHON: $(%DIR%_PYTHON) @$(NORMAL_INSTALL) if %?BASE% @list='$(%DIR%_PYTHON)'; dlist=; list2=; test -n "$(%NDIR%dir)" \|\| list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)" \|\| exit 1; \ fi; \ for p in $$list; do \ ## A file can be in the source directory or the build directory. if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \ if test -f $$b$$p; then \ ## Compute basename of source file. Unless this is a nobase_ target, we ## want to install 'python/foo.py' as '$(DESTDIR)$(%NDIR%dir)/foo.py', ## not '$(DESTDIR)$(%NDIR%dir)/python/foo.py'. $(am__strip_dir) \ dlist="$$dlist $$f"; \ list2="$$list2 $$b$$p"; \ else :; fi; \ done; \ for file in $$list2; do echo $$file; done \| $(am__base_list) \| \ while read files; do \ ## Don't perform translation, since script name is important. echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(%NDIR%dir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(%NDIR%dir)" \|\| exit $$?; \ done \|\| exit $$?; \ ## Byte-compile must be done at install time, since file times are ## encoded in the actual files. if test -n "$$dlist"; then \ $(am__py_compile) --destdir "$(DESTDIR)" \ --basedir "$(%NDIR%dir)" $$dlist; \ else :; fi else !%?BASE% @list='$(%DIR%_PYTHON)'; test -n "$(%NDIR%dir)" \|\| list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)" \|\| exit 1; \ fi; \ $(am__nobase_list) \| { while read dir files; do \ xfiles=; for p in $$files; do \ ## A file can be in the source directory or the build directory. if test -f "$$p"; then b=; else b="$(srcdir)/"; fi; \ if test -f "$$b$$p"; then xfiles="$$xfiles $$b$$p"; dlist="$$dlist $$p"; \ else :; fi; done; \ test -z "$$xfiles" \|\| { \ test "x$$dir" = x. \|\| { \ echo "$(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)/$$dir"; }; \ ## Don't perform translation, since script name is important. echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \ $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(%NDIR%dir)/$$dir" \|\| exit $$?; }; \ done; \ ## Byte-compile must be done at install time, since file times are ## encoded in the actual files. if test -n "$$dlist"; then \ $(am__py_compile) --destdir "$(DESTDIR)" \ --basedir "$(%NDIR%dir)" $$dlist; \ else :; fi; } endif !%?BASE% endif %?INSTALL% ## -------------- ## ## Uninstalling. ## ## -------------- ## if %?INSTALL% ?FIRST?am__pep3147_tweak = \ ?FIRST? sed -e 's\|\.py$$\|\|' -e 's\|[^/]$$\|__pycache__/&..pyc __pycache__/&..pyo\|' .PHONY uninstall-am: uninstall-%DIR%PYTHON uninstall-%DIR%PYTHON: @$(NORMAL_UNINSTALL) @list='$(%DIR%_PYTHON)'; test -n "$(%NDIR%dir)" \|\| list=; \ ?BASE? py_files=`for p in $$list; do echo $$p; done \| sed -e 's\|^./\|\|'`; \ ?!BASE? $(am__nobase_strip_setup); py_files=`$(am__nobase_strip)`; \ test -n "$$py_files" \|\| exit 0; \ dir='$(DESTDIR)$(%NDIR%dir)'; \ ## Also remove the .pyc and .pyo byte compiled versions. pyc_files=`echo "$$py_files" \| sed 's\|$$\|c\|'`; \ pyo_files=`echo "$$py_files" \| sed 's\|$$\|o\|'`; \ st=0; \ for files in "$$py_files" "$$pyc_files" "$$pyo_files"; do \ $(am__uninstall_files_from_dir) \|\| st=$$?; \ done; \ ## This is somewhat tricky, because for newer pythons we have to take PEP-3147 ## into account. Avoid exceeding the command-line length limit. dir='$(DESTDIR)$(%NDIR%dir)'; \ echo "$$py_files" \| $(am__pep3147_tweak) \| $(am__base_list) \| \ while read files; do \ $(am__uninstall_files_from_dir) \|\| st=$$?; \ done \|\| exit $$?; \ exit $$st endif %?INSTALL% ## ---------- ## ## Cleaning. ## ## ---------- ## ## There is nothing to clean here since files are ## byte-compiled when (and where) they are installed. ## -------------- ## ## Distributing. ## ## -------------- ## if %?DIST% DIST_COMMON += %DISTVAR% endif %?DIST%	4.95 KB	2020-02-26 04:25
📄 remake-hdr.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. %CONFIG_H%: %STAMP% ## Recover from removal of CONFIG_HEADER. @test -f $@ \|\| rm -f %STAMP% @test -f $@ \|\| $(MAKE) $(AM_MAKEFLAGS) %STAMP% %STAMP%: %CONFIG_H_DEPS% $(top_builddir)/config.status @rm -f %STAMP% cd $(top_builddir) && $(SHELL) ./config.status %CONFIG_H_PATH% ## Only the first file of AC_CONFIG_HEADERS is assumed to be generated ## by autoheader. if %?FIRST-HDR% %CONFIG_HIN%: %MAINTAINER-MODE% $(am__configure_deps) %FILES% ## Cater to parallel BSD make. ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) ## Whenever $(AUTOHEADER) has run, we must make sure that ## ./config.status will rebuild config.h. The dependency from %STAMP% ## on %CONFIG_H_DEPS% (which contains config.hin) is not enough to ## express this. ## ## There are some tricky cases where this rule will build a ## config.hin which has the same timestamp as %STAMP%, in which case ## ./config.status will not be rerun (meaning that users will use an ## out-of-date config.h without knowing it). One situation where this ## can occur is the following: ## 1. the user updates some configure dependency (let's say foo.m4) ## and runs 'make'; ## 2. the rebuild rules detect that a foo.m4 has changed, ## run aclocal, autoconf, automake, and then run ./config.status. ## (Note that autoheader hasn't been called yet, so ./config.status ## outputs a config.h from an obsolete config.hin); ## 3. once Makefile has been regenerated, make continues, and ## discovers that config.h is a dependency of the 'all' rule. ## Because config.h depends on stamp-h1, stamp-h1 depends on ## config.hin, and config.hin depends on aclocal.m4, make runs ## autoheader to rebuild config.hin. ## Now make ought to call ./config.status once again to rebuild ## config.h from the new config.hin, but if you have a sufficiently ## fast box, steps 2 and 3 will occur within the same second: the ## config.h/stamp-h1 generated from the outdated config.hin will have ## the same mtime as the new config.hin. Hence make will think that ## config.h is up to date. ## ## A solution is to erase %STAMP% here so that the %STAMP% rule ## is always triggered after the this one. rm -f %STAMP% ## Autoheader has the bad habit of not changing the timestamp if ## config.hin is unchanged, which breaks Make targets. Since what ## must not changed gratuitously is config.h, which is already handled ## by config.status, there is no reason to make things complex for ## config.hin. touch $@ endif %?FIRST-HDR%	3.14 KB	2020-01-01 19:43
📄 scripts.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. if %?INSTALL% include inst-vars.am endif %?INSTALL% ## ------------ ## ## Installing. ## ## ------------ ## if %?INSTALL% ## if doesn't work properly for Automake variables yet. am__installdirs += "$(DESTDIR)$(%NDIR%dir)" ?EXEC?.PHONY install-exec-am: install-%DIR%SCRIPTS ?!EXEC?.PHONY install-data-am: install-%DIR%SCRIPTS install-%DIR%SCRIPTS: $(%DIR%_SCRIPTS) @$(NORMAL_INSTALL) ## Funny invocation because Makefile variable can be empty, leading to ## a syntax error in sh. @list='$(%DIR%_SCRIPTS)'; test -n "$(%NDIR%dir)" \|\| list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)'"; \ $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)" \|\| exit 1; \ fi; \ ?!BASE? $(am__nobase_strip_setup); \ for p in $$list; do \ ## A file can be in the source directory or the build directory. if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ## A script may or may not exist. if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \ done \| \ ## We now have a list of "sourcefile newline (nobase-)target" pairs. ## Turn that into "sourcefile source_base target_dir xformed_target_base", ## with newlines being turned into spaces in a second step. sed -e 'p;s,./,,;n' \ ?BASE? -e 'h;s\|.\|.\|' \ ?!BASE? -e "s\|$$srcdirstrip/\|\|" -e 'h;s\|[^/]$$\|\|; s\|^$$\|.\|' \ -e 'p;x;s,./,,;$(transform)' \| sed 'N;N;N;s,\n, ,g' \| \ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ if ($$2 == $$4) { files[d] = files[d] " " $$1; \ if (++n[d] == $(am__install_max)) { \ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \ else { print "f", d "/" $$4, $$1 } } \ END { for (d in files) print "f", d, files[d] }' \| \ while read type dir files; do \ ?!BASE? case $$type in \ ?!BASE? d) echo " $(MKDIR_P) '$(DESTDIR)$(%NDIR%dir)/$$dir'"; \ ?!BASE? $(MKDIR_P) "$(DESTDIR)$(%NDIR%dir)/$$dir" \|\| exit $$?;; \ ?!BASE? f) \ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ test -z "$$files" \|\| { \ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(%NDIR%dir)$$dir'"; \ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(%NDIR%dir)$$dir" \|\| exit $$?; \ } \ ?!BASE? ;; esac \ ; done endif %?INSTALL% ## -------------- ## ## Uninstalling. ## ## -------------- ## if %?INSTALL% .PHONY uninstall-am: uninstall-%DIR%SCRIPTS uninstall-%DIR%SCRIPTS: @$(NORMAL_UNINSTALL) @list='$(%DIR%_SCRIPTS)'; test -n "$(%NDIR%dir)" \|\| exit 0; \ ?BASE? files=`for p in $$list; do echo "$$p"; done \| \ ?BASE? sed -e 's,./,,;$(transform)'`; \ ?!BASE? $(am__nobase_strip_setup); \ ?!BASE? files=`$(am__nobase_strip) \ ?!BASE? -e 'h;s,./,,;$(transform);x;s\|[^/]$$\|\|;G;s,\n,,'`; \ dir='$(DESTDIR)$(%NDIR%dir)'; $(am__uninstall_files_from_dir) endif %?INSTALL% ## -------------- ## ## Distributing. ## ## -------------- ## if %?DIST% DIST_COMMON += %DISTVAR% endif %?DIST% ## ---------- ## ## Checking. ## ## ---------- ## if %?CK-OPTS% .PHONY installcheck-am: installcheck-%DIR%SCRIPTS installcheck-%DIR%SCRIPTS: $(%DIR%_SCRIPTS) bad=0; pid=$$$$; list="$(%DIR%_SCRIPTS)"; for p in $$list; do \ case ' $(AM_INSTALLCHECK_STD_OPTIONS_EXEMPT) ' in \ ## Match $(srcdir)/$$p in addition to $$p because Sun make might rewrite ## filenames in AM_INSTALLCHECK_STD_OPTIONS_EXEMPT during VPATH builds. " $$p "* \| " $(srcdir)/$$p ") continue;; \ esac; \ ## Strip any leading directory before applying $(transform). f=`echo "$$p" \| sed 's,^./,,;$(transform)'`; \ ## Insert the directory back if nobase_ is used. ?!BASE? f=`echo "$$p" \| sed 's\|[^/]$$\|\|'`"$$f"; \ for opt in --help --version; do \ if "$(DESTDIR)$(%NDIR%dir)/$$f" $$opt >c$${pid}_.out \ 2>c$${pid}_.err </dev/null \ && test -n "`cat c$${pid}_.out`" \ && test -z "`cat c$${pid}_.err`"; then :; \ else echo "$$f does not support $$opt" 1>&2; bad=1; fi; \ done; \ done; rm -f c$${pid}_.???; exit $$bad endif %?CK-OPTS%	4.6 KB	2020-01-01 19:43
📄 subdirs.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. RECURSIVE_TARGETS += all-recursive check-recursive installcheck-recursive RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive am__recursive_targets = \ $(RECURSIVE_TARGETS) \ $(RECURSIVE_CLEAN_TARGETS) \ $(am__extra_recursive_targets) ## All documented targets which invoke 'make' recursively, or depend ## on targets that do so. GNUmakefile from gnulib depends on this. AM_RECURSIVE_TARGETS += $(am__recursive_targets:-recursive=) .PHONY .MAKE: $(am__recursive_targets) # This directory's subdirectories are mostly independent; you can cd # into them and run 'make' without going through this Makefile. # To change the values of 'make' variables: instead of editing Makefiles, # (1) if the variable is set in 'config.status', edit 'config.status' # (which will cause the Makefiles to be regenerated when you run 'make'); # (2) otherwise, pass the desired values on the 'make' command line. $(am__recursive_targets): ## Using $failcom allows "-k" to keep its natural meaning when running a ## recursive rule. @fail=; \ if $(am__make_keepgoing); then \ failcom='fail=yes'; \ else \ failcom='exit 1'; \ fi; \ dot_seen=no; \ target=`echo $@ \| sed s/-recursive//`; \ ## For distclean and maintainer-clean we make sure to use the full ## list of subdirectories. We do this so that 'configure; make ## distclean' really is a no-op, even if SUBDIRS is conditional. case "$@" in \ distclean-* \| maintainer-clean-) list='$(DIST_SUBDIRS)' ;; \ ) list='$(SUBDIRS)' ;; \ esac; \ for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ \|\| eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" \|\| exit 1; \ fi; test -z "$$fail" mostlyclean: mostlyclean-recursive clean: clean-recursive distclean: distclean-recursive maintainer-clean: maintainer-clean-recursive	2.8 KB	2020-01-01 19:43
📄 tags.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. # Read a list of newline-separated strings from the standard input, # and print each of them once, without duplicates. Input order is # not preserved. am__uniquify_input = $(AWK) '\ BEGIN { nonempty = 0; } \ { items[$$0] = 1; nonempty = 1; } \ END { if (nonempty) { for (i in items) print i; }; } \ ' # Make sure the list of sources is unique. This is necessary because, # e.g., the same source file might be shared among _SOURCES variables # for different programs/libraries. am__define_uniq_tagged_files = \ list='$(am__tagged_files)'; \ unique=`for i in $$list; do \ ## Handle VPATH correctly. if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done \| $(am__uniquify_input)` ## ---- ## ## ID. ## ## ---- ## ID: $(am__tagged_files) $(am__define_uniq_tagged_files); mkid -fID $$unique ## ------ ## ## TAGS. ## ## ------ ## ETAGS = etags .PHONY: TAGS tags if %?SUBDIRS% AM_RECURSIVE_TARGETS += TAGS RECURSIVE_TARGETS += tags-recursive tags: tags-recursive else !%?SUBDIRS% tags: tags-am endif !%?SUBDIRS% TAGS: tags tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) ## We use the positional parameters to build the subdir list with ## absolute names, without the need to worry about white space in `pwd`. set x; \ here=`pwd`; \ ## Exuberant Ctags wants --etags-include, ## GNU Etags --include ## Furthermore Exuberant Ctags 5.5.4 fails to create TAGS files ## when no files are supplied, despite any --etags-include option. ## A workaround is to pass '.' as a file. This is what $empty_fix is for. ?SUBDIRS? if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ ?SUBDIRS? include_option=--etags-include; \ ?SUBDIRS? empty_fix=.; \ ?SUBDIRS? else \ ?SUBDIRS? include_option=--include; \ ?SUBDIRS? empty_fix=; \ ?SUBDIRS? fi; \ ?SUBDIRS? list='$(SUBDIRS)'; for subdir in $$list; do \ ## Do nothing if we're trying to look in '.'. ?SUBDIRS? if test "$$subdir" = .; then :; else \ ?SUBDIRS? test ! -f $$subdir/TAGS \|\| \ ## Note that the = is mandatory for --etags-include. ?SUBDIRS? set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ ?SUBDIRS? fi; \ ?SUBDIRS? done; \ $(am__define_uniq_tagged_files); \ ## Remove the 'x' we added first: shift; \ ## Make sure we have something to run etags on. if test -z "$(ETAGS_ARGS)$$$$unique"; then :; else \ test -n "$$unique" \|\| unique=$$empty_fix; \ if test $$# -gt 0; then \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ "$$@" $$unique; \ else \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$unique; \ fi; \ fi ## --------------- ## ## vi-style tags. ## ## --------------- ## CTAGS = ctags .PHONY: CTAGS ctags if %?SUBDIRS% AM_RECURSIVE_TARGETS += CTAGS RECURSIVE_TARGETS += ctags-recursive ctags: ctags-recursive else !%?SUBDIRS% ctags: ctags-am endif !%?SUBDIRS% CTAGS: ctags ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) $(am__define_uniq_tagged_files); \ ## Make sure we have something to run ctags on. test -z "$(CTAGS_ARGS)$$unique" \ \|\| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$unique ## --------------- ## ## "Global tags". ## ## --------------- ## .PHONY: GTAGS GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && $(am__cd) $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) "$$here" ## ------- ## ## cscope ## ## ------- ## if %?TOPDIR_P% CSCOPE = cscope .PHONY: cscope clean-cscope AM_RECURSIVE_TARGETS += cscope cscope: cscope.files test ! -s cscope.files \ \|\| $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) clean-cscope: -rm -f cscope.files cscope.files: clean-cscope cscopelist endif %?TOPDIR_P% if %?SUBDIRS% RECURSIVE_TARGETS += cscopelist-recursive cscopelist: cscopelist-recursive else !%?SUBDIRS% cscopelist: cscopelist-am endif !%?SUBDIRS% cscopelist-am: $(am__tagged_files) list='$(am__tagged_files)'; \ case "$(srcdir)" in \ [\\/] \| ?:[\\/]) sdir="$(srcdir)" ;; \ ) sdir=$(subdir)/$(srcdir) ;; \ esac; \ for i in $$list; do \ if test -f "$$i"; then \ echo "$(subdir)/$$i"; \ else \ echo "$$sdir/$$i"; \ fi; \ done >> $(top_builddir)/cscope.files ## ---------- ## ## Cleaning. ## ## ---------- ## .PHONY distclean-am: distclean-tags distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags if %?TOPDIR_P% -rm -f cscope.out cscope.in.out cscope.po.out cscope.files endif %?TOPDIR_P%	5.04 KB	2020-01-01 19:43
📄 texi-vers.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. DIST_COMMON += %VTEXI% %STAMPVTI% ## Don't give this rule a command (even '@:'). ## %STAMPVTI% is always newer than %VTEXI%, so this rule is always ## triggered. If you equip this rule with a command, GNU make will ## assume %VTEXI% has been rebuild in the current directory and ## discard any %VTEXI% file found in a VPATH search. %VTEXI%: %MAINTAINER-MODE% %STAMPVTI% ## Depend on configure so that version number updates cause a rebuild. ## (Not configure.ac, because not all setups define the version number ## in this file.) %STAMPVTI%: %TEXI% $(top_srcdir)/configure ## It is wrong to have %STAMPVTI% dependent on %DIRSTAMP%, because ## %STAMPVTI% is distributed and %DIRSTAMP% isn't: a distributed file ## should never be dependent upon a non-distributed built file. ## Therefore we ensure that %DIRSTAMP% exists in the rule. ## Use cp + mv so that the update of %VTEXI% is atomic even if ## the source directory is on a different file system. ?DIRSTAMP? @test -f %DIRSTAMP% \|\| $(MAKE) $(AM_MAKEFLAGS) %DIRSTAMP% @(dir=.; test -f ./%TEXI% \|\| dir=$(srcdir); \ set `$(SHELL) %MDDIR%mdate-sh $$dir/%TEXI%`; \ echo "@set UPDATED $$1 $$2 $$3"; \ echo "@set UPDATED-MONTH $$2 $$3"; \ echo "@set EDITION $(VERSION)"; \ echo "@set VERSION $(VERSION)") > %VTI%.tmp$$$$ && \ (cmp -s %VTI%.tmp$$$$ %VTEXI% \ \|\| (echo "Updating %VTEXI%" && \ cp %VTI%.tmp$$$$ %VTEXI%.tmp$$$$ && \ mv %VTEXI%.tmp$$$$ %VTEXI%)) && \ rm -f %VTI%.tmp$$$$ %VTEXI%.$$$$ @cp %VTEXI% $@ mostlyclean-am: mostlyclean-%VTI% mostlyclean-%VTI%: -rm -f %VTI%.tmp* %VTEXI%.tmp* maintainer-clean-am: maintainer-clean-%VTI% maintainer-clean-%VTI%: %MAINTAINER-MODE% -rm -f %STAMPVTI% %VTEXI% .PHONY: mostlyclean-%VTI% maintainer-clean-%VTI%	2.42 KB	2020-01-01 19:43
📄 texibuild.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. ?GENERIC_INFO?%SOURCE_SUFFIX%%DEST_SUFFIX%: ?!GENERIC_INFO?%DEST_INFO_PREFIX%%DEST_SUFFIX%: %SOURCE_INFO% %DEPS% ## It is wrong to have 'info' files dependent on %DIRSTAMP%, because ## 'info' files are distributed and %DIRSTAMP% isn't: a distributed file ## should never be dependent upon a non-distributed built file. ## Therefore we ensure that %DIRSTAMP% exists in the rule. ?!INSRC??DIRSTAMP? @test -f %DIRSTAMP% \|\| $(MAKE) $(AM_MAKEFLAGS) %DIRSTAMP% ## Back up the info files before running makeinfo. This is the cheapest ## way to ensure that ## 1) If the texinfo file shrinks (or if you start using --no-split), ## you'll not be left with some dead info files lying around -- dead ## files which would end up in the distribution. ## 2) If the texinfo file has some minor mistakes which cause makeinfo ## to fail, the info files are not removed. (They are needed by the ## developer while he writes documentation.) ## .iNN files are used on DJGPP. See the comments in install-info-am %AM_V_MAKEINFO%restore=: && backupdir="$(am__leading_dot)am$$$$" && \ ?INSRC? am__cwd=`pwd` && $(am__cd) $(srcdir) && \ rm -rf $$backupdir && mkdir $$backupdir && \ ## If makeinfo is not installed we must not backup the files so ## 'missing' can do its job and touch $@ if it exists. if ($(MAKEINFO) --version) >/dev/null 2>&1; then \ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \ done; \ else :; fi && \ ?INSRC? cd "$$am__cwd"; \ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) %MAKEINFOFLAGS% \ ?!INSRC? -o $@ `test -f '%SOURCE_INFO%' \|\| echo '$(srcdir)/'`%SOURCE_INFO%; \ ?INSRC??!GENERIC_INFO? -o $@ $(srcdir)/%SOURCE_INFO%; \ ?INSRC??GENERIC_INFO? -o $@ $<; \ then \ rc=0; \ ?INSRC? $(am__cd) $(srcdir); \ else \ rc=$$?; \ ## Beware that backup info files might come from a subdirectory. ?INSRC? $(am__cd) $(srcdir) && \ $$restore $$backupdir/ `echo "./$@" \| sed 's\|[^/]*$$\|\|'`; \ fi; \ rm -rf $$backupdir; exit $$rc INFO_DEPS += %DEST_INFO_PREFIX%%DEST_SUFFIX% ?GENERIC?%SOURCE_SUFFIX%.dvi: ?!GENERIC?%DEST_PREFIX%.dvi: %SOURCE% %DEPS% %DIRSTAMP% %AM_V_TEXI2DVI%TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ ## Must set MAKEINFO like this so that version.texi will be found even ## if it is in srcdir (-I $(srcdir) is set in %MAKEINFOFLAGS%). MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) %MAKEINFOFLAGS%' \ ## texi2dvi doesn't silence everything with -q, redirect to /dev/null instead. ## We still want -q (%TEXIQUIET%) because it turns on batch mode. ## Use '--build-dir' so that TeX and Texinfo auxiliary files and build ## by-products are left in there, instead of cluttering the current ## directory (see automake bug#11146). Use a different build-dir for ## each file (and distinct from that of the corresponding PDF file) to ## avoid hitting a Texinfop bug that could cause low-probability racy ## failure when doing parallel builds; see: ## https://lists.gnu.org/archive/html/automake-patches/2012-06/msg00073.html $(TEXI2DVI) %TEXIQUIET% --build-dir=$(@:.dvi=.t2d) -o $@ %TEXIDEVNULL% \ ?GENERIC? %SOURCE% ?!GENERIC? `test -f '%SOURCE%' \|\| echo '$(srcdir)/'`%SOURCE% ?GENERIC?%SOURCE_SUFFIX%.pdf: ?!GENERIC?%DEST_PREFIX%.pdf: %SOURCE% %DEPS% %DIRSTAMP% %AM_V_TEXI2PDF%TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ ## Must set MAKEINFO like this so that version.texi will be found even ## if it is in srcdir (-I $(srcdir) is set in %MAKEINFOFLAGS%). MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) %MAKEINFOFLAGS%' \ ## texi2pdf doesn't silence everything with -q, redirect to /dev/null instead. ## We still want -q (%TEXIQUIET%) because it turns on batch mode. ## Use '--build-dir' so that TeX and Texinfo auxiliary files and build ## by-products are left in there, instead of cluttering the current ## directory (see automake bug#11146). Use a different build-dir for ## each file (and distinct from that of the corresponding DVI file) to ## avoid hitting a Texinfop bug that could cause low-probability racy ## failure when doing parallel builds; see: ## https://lists.gnu.org/archive/html/automake-patches/2012-06/msg00073.html $(TEXI2PDF) %TEXIQUIET% --build-dir=$(@:.pdf=.t2p) -o $@ %TEXIDEVNULL% \ ?GENERIC? %SOURCE% ?!GENERIC? `test -f '%SOURCE%' \|\| echo '$(srcdir)/'`%SOURCE% ?GENERIC?%SOURCE_SUFFIX%.html: ?!GENERIC?%DEST_PREFIX%.html: %SOURCE% %DEPS% %DIRSTAMP% ## When --split (the default) is used, makeinfo will output a ## directory. However it will not update the time stamp of a ## previously existing directory, and when the names of the nodes ## in the manual change, it may leave unused pages. Our fix ## is to build under a temporary name, and replace the target on ## success. %AM_V_MAKEINFO%rm -rf $(@:.html=.htp) %SILENT%if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) %MAKEINFOFLAGS% \ ?GENERIC? -o $(@:.html=.htp) %SOURCE%; \ ?!GENERIC? -o $(@:.html=.htp) `test -f '%SOURCE%' \|\| echo '$(srcdir)/'`%SOURCE%; \ then \ rm -rf $@ && mv $(@:.html=.htp) $@; \ else \ rm -rf $(@:.html=.htp); exit 1; \ fi ## If we are using the generic rules, we need separate dependencies. ## (Don't wonder about %DIRSTAMP% here, this is used only by non-generic ## rules.) if %?GENERIC_INFO% %DEST_INFO_PREFIX%%DEST_SUFFIX%: %SOURCE_REAL% %DEPS% endif %?GENERIC_INFO% if %?GENERIC% %DEST_PREFIX%.dvi: %SOURCE_REAL% %DEPS% %DEST_PREFIX%.pdf: %SOURCE_REAL% %DEPS% %DEST_PREFIX%.html: %SOURCE_REAL% %DEPS% endif %?GENERIC%	6.18 KB	2020-01-01 19:43
📄 texinfos.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1994-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. ## ----------- ## ## Variables. ## ## ----------- ## if %?LOCAL-TEXIS% TEXI2DVI = texi2dvi TEXI2PDF = $(TEXI2DVI) --pdf --batch MAKEINFOHTML = $(MAKEINFO) --html AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS) endif %?LOCAL-TEXIS% ## ---------- ## ## Building. ## ## ---------- ## ## The way to make PostScript, for those who want it. if %?LOCAL-TEXIS% DVIPS = dvips .dvi.ps: %AM_V_DVIPS%TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \ $(DVIPS) %TEXIQUIET% -o $@ $< endif %?LOCAL-TEXIS% .PHONY: dvi dvi-am html html-am info info-am pdf pdf-am ps ps-am if %?SUBDIRS% RECURSIVE_TARGETS += dvi-recursive html-recursive info-recursive RECURSIVE_TARGETS += pdf-recursive ps-recursive dvi: dvi-recursive html: html-recursive info: info-recursive pdf: pdf-recursive ps: ps-recursive else !%?SUBDIRS% dvi: dvi-am html: html-am info: info-am pdf: pdf-am ps: ps-am endif !%?SUBDIRS% if %?LOCAL-TEXIS% dvi-am: $(DVIS) html-am: $(HTMLS) info-am: $(INFO_DEPS) pdf-am: $(PDFS) ps-am: $(PSS) else ! %?LOCAL-TEXIS% dvi-am: html-am: info-am: pdf-am: ps-am: endif ! %?LOCAL-TEXIS% ## ------------ ## ## Installing. ## ## ------------ ## ## Some code should be run only if install-info actually exists, and ## if the user doesn't request it not to be run (through the ## 'AM_UPDATE_INFO_DIR' environment variable). See automake bug#9773 ## and Debian Bug#543992. am__can_run_installinfo = \ case $$AM_UPDATE_INFO_DIR in \ n\|no\|NO) false;; \ ) (install-info --version) >/dev/null 2>&1;; \ esac ## Look in both . and srcdir because the info pages might have been ## rebuilt in the build directory. Can't cd to srcdir; that might ## break a possible install-sh reference. ## ## Funny name due to --cygnus influence; we want to reserve ## 'install-info' for the user. ## ## TEXINFOS primary are always installed in infodir, hence install-data ## is hard coded. if %?INSTALL-INFO% if %?LOCAL-TEXIS% am__installdirs += "$(DESTDIR)$(infodir)" install-data-am: install-info-am endif %?LOCAL-TEXIS% endif %?INSTALL-INFO% .PHONY: \ install-dvi install-dvi-am \ install-html install-html-am \ install-info install-info-am \ install-pdf install-pdf-am \ install-ps install-ps-am if %?SUBDIRS% RECURSIVE_TARGETS += \ install-dvi-recursive \ install-html-recursive \ install-info-recursive \ install-pdf-recursive \ install-ps-recursive install-dvi: install-dvi-recursive install-html: install-html-recursive install-info: install-info-recursive install-pdf: install-pdf-recursive install-ps: install-ps-recursive else !%?SUBDIRS% install-dvi: install-dvi-am install-html: install-html-am install-info: install-info-am install-pdf: install-pdf-am install-ps: install-ps-am endif !%?SUBDIRS% if %?LOCAL-TEXIS% include inst-vars.am install-dvi-am: $(DVIS) @$(NORMAL_INSTALL) @list='$(DVIS)'; test -n "$(dvidir)" \|\| list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \ $(MKDIR_P) "$(DESTDIR)$(dvidir)" \|\| exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done \| $(am__base_list) \| \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" \|\| exit $$?; \ done install-html-am: $(HTMLS) @$(NORMAL_INSTALL) @list='$(HTMLS)'; list2=; test -n "$(htmldir)" \|\| list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \ $(MKDIR_P) "$(DESTDIR)$(htmldir)" \|\| exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p" \|\| test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \ $(am__strip_dir) \ ## This indirection is required to work around a bug of the Solaris 10 ## shell /usr/xpg4/bin/sh. The description of the bug can be found at ## <https://lists.gnu.org/archive/html/bug-autoconf/2011-11/msg00005.html> ## and the report of the original failure can be found at automake ## bug#10026 <https://debbugs.gnu.org/cgi/bugreport.cgi?bug=10026#23> d2=$$d$$p; \ if test -d "$$d2"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" \|\| exit 1; \ echo " $(INSTALL_DATA) '$$d2'/ '$(DESTDIR)$(htmldir)/$$f'"; \ $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" \|\| exit $$?; \ else \ list2="$$list2 $$d2"; \ fi; \ done; \ test -z "$$list2" \|\| { echo "$$list2" \| $(am__base_list) \| \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" \|\| exit $$?; \ done; } install-info-am: $(INFO_DEPS) @$(NORMAL_INSTALL) @srcdirstrip=`echo "$(srcdir)" \| sed 's\|.\|.\|g'`; \ list='$(INFO_DEPS)'; test -n "$(infodir)" \|\| list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \ $(MKDIR_P) "$(DESTDIR)$(infodir)" \|\| exit 1; \ fi; \ for file in $$list; do \ ## Strip possible $(srcdir) prefix. case $$file in \ $(srcdir)/) file=`echo "$$file" \| sed "s\|^$$srcdirstrip/\|\|"`;; \ esac; \ if test -f $$file; then d=.; else d=$(srcdir); fi; \ ## 8+3 filesystems cannot deal with foo.info-N filenames: they all ## conflict. DJGPP comes with a tool, DJTAR, that will rename these ## files to foo.iNN while extracting the archive. DJGPP's makeinfo ## is patched to grok these filenames. However we have to account ## for the renaming when installing the info files. ## ## If $file == foo.info, then $file_i == foo.i. The reason we use two ## shell commands instead of one ('s\|\.info$$\|.i\|') is so that a suffix-less ## 'foo' becomes 'foo.i' too. file_i=`echo "$$file" \| sed 's\|\.info$$\|\|;s\|$$\|.i\|'`; \ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \ if test -f $$ifile; then \ echo "$$ifile"; \ else : ; fi; \ done; \ done \| $(am__base_list) \| \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" \|\| exit $$?; done @$(POST_INSTALL) @if $(am__can_run_installinfo); then \ list='$(INFO_DEPS)'; test -n "$(infodir)" \|\| list=; \ for file in $$list; do \ ## Strip directory relfile=`echo "$$file" \| sed 's\|^./\|\|'`; \ ## Run ":" after install-info in case install-info fails. We really ## don't care about failures here, because they can be spurious. For ## instance if you don't have a dir file, install-info will fail. I ## think instead it should create a new dir file for you. This bug ## causes the "make distcheck" target to fail reliably. echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\ ## Use "\|\| :" here because Sun make passes -e to sh; if install-info ## fails then we'd fail if we used ";". install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" \|\| :;\ done; \ else : ; fi install-pdf-am: $(PDFS) @$(NORMAL_INSTALL) @list='$(PDFS)'; test -n "$(pdfdir)" \|\| list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(pdfdir)" \|\| exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done \| $(am__base_list) \| \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" \|\| exit $$?; done install-ps-am: $(PSS) @$(NORMAL_INSTALL) @list='$(PSS)'; test -n "$(psdir)" \|\| list=; \ if test -n "$$list"; then \ echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \ $(MKDIR_P) "$(DESTDIR)$(psdir)" \|\| exit 1; \ fi; \ for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ echo "$$d$$p"; \ done \| $(am__base_list) \| \ while read files; do \ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \ $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" \|\| exit $$?; done else ! %?LOCAL-TEXIS% install-dvi-am: install-html-am: install-info-am: install-pdf-am: install-ps-am: endif ! %?LOCAL-TEXIS% ## -------------- ## ## Uninstalling. ## ## -------------- ## if %?LOCAL-TEXIS% .PHONY uninstall-am: \ uninstall-dvi-am \ uninstall-html-am \ uninstall-info-am \ uninstall-ps-am \ uninstall-pdf-am uninstall-dvi-am: @$(NORMAL_UNINSTALL) @list='$(DVIS)'; test -n "$(dvidir)" \|\| list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \ rm -f "$(DESTDIR)$(dvidir)/$$f"; \ done uninstall-html-am: @$(NORMAL_UNINSTALL) @list='$(HTMLS)'; test -n "$(htmldir)" \|\| list=; \ for p in $$list; do \ $(am__strip_dir) \ ## $f can be a directory, hence the -r. echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \ rm -rf "$(DESTDIR)$(htmldir)/$$f"; \ done uninstall-info-am: @$(PRE_UNINSTALL) ## Run two loops here so that we can handle PRE_UNINSTALL and ## NORMAL_UNINSTALL correctly. @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \ list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" \| sed 's\|^./\|\|'`; \ ## install-info needs the actual info file. We use the installed one, ## rather than relying on one still being in srcdir or builddir. ## However, "make uninstall && make uninstall" should not fail, ## so we ignore failure if the file did not exist. echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \ if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \ then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" \|\| exit 1; fi; \ done; \ else :; fi @$(NORMAL_UNINSTALL) @list='$(INFO_DEPS)'; \ for file in $$list; do \ relfile=`echo "$$file" \| sed 's\|^./\|\|'`; \ ## DJGPP-style info files. See comment in install-info-am. relfile_i=`echo "$$relfile" \| sed 's\|\.info$$\|\|;s\|$$\|.i\|'`; \ (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \ echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \ else :; fi); \ done uninstall-pdf-am: @$(NORMAL_UNINSTALL) @list='$(PDFS)'; test -n "$(pdfdir)" \|\| list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \ rm -f "$(DESTDIR)$(pdfdir)/$$f"; \ done uninstall-ps-am: @$(NORMAL_UNINSTALL) @list='$(PSS)'; test -n "$(psdir)" \|\| list=; \ for p in $$list; do \ $(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \ rm -f "$(DESTDIR)$(psdir)/$$f"; \ done endif %?LOCAL-TEXIS% if %?LOCAL-TEXIS% .PHONY: dist-info dist-info: $(INFO_DEPS) @srcdirstrip=`echo "$(srcdir)" \| sed 's\|.\|.\|g'`; \ list='$(INFO_DEPS)'; \ for base in $$list; do \ ## Strip possible $(srcdir) prefix. case $$base in \ $(srcdir)/) base=`echo "$$base" \| sed "s\|^$$srcdirstrip/\|\|"`;; \ esac; \ if test -f $$base; then d=.; else d=$(srcdir); fi; \ base_i=`echo "$$base" \| sed 's\|\.info$$\|\|;s\|$$\|.i\|'`; \ for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \ if test -f $$file; then \ ## Strip leading '$$d/'. relfile=`expr "$$file" : "$$d/$.$"`; \ test -f "$(distdir)/$$relfile" \|\| \ cp -p $$file "$(distdir)/$$relfile"; \ else :; fi; \ done; \ done endif %?LOCAL-TEXIS% ## ---------- ## ## Cleaning. ## ## ---------- ## ## The funny name is due to --cygnus influence; in Cygnus mode, ## 'clean-info' is a target that users can use. if %?LOCAL-TEXIS% .PHONY mostlyclean-am: mostlyclean-aminfo .PHONY: mostlyclean-aminfo mostlyclean-aminfo: ## Use '-rf', not just '-f', because the %CLEAN% substitutions can also ## contain any directory created by "makeinfo --html", as well as the ## '.t2d' and '*.t2p' directories used by texi2dvi and texi2pdf. -rm -rf %MOSTLYCLEAN% .PHONY clean-am: clean-aminfo clean-aminfo: ## Use '-rf', not just '-f'; see comments in 'mostlyclean-aminfo' ## above for details. ?TEXICLEAN? -test -z "%TEXICLEAN%" \ ?TEXICLEAN? \|\| rm -rf %TEXICLEAN% .PHONY maintainer-clean-am: maintainer-clean-aminfo maintainer-clean-aminfo: @list='$(INFO_DEPS)'; for i in $$list; do \ ## .iNN files are DJGPP-style info files. i_i=`echo "$$i" \| sed 's\|\.info$$\|\|;s\|$$\|.i\|'`; \ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \ done ## Use '-rf', not just '-f'; see comments in 'mostlyclean-aminfo' ## above for details. ?MAINTCLEAN? -test -z "%MAINTCLEAN%" \ ?MAINTCLEAN? \|\| rm -rf %MAINTCLEAN% endif %?LOCAL-TEXIS%	13.13 KB	2020-01-01 19:43
📄 vala.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 2008-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. ## There is no rule here. :-)	769 B	2020-01-01 19:43
📄 yacc.am ## automake - create Makefile.in from Makefile.am ## Copyright (C) 1998-2020 Free Software Foundation, Inc. ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2, or (at your option) ## any later version. ## This program is distributed in the hope that it will be useful, ## but WITHOUT ANY WARRANTY; without even the implied warranty of ## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ## GNU General Public License for more details. ## You should have received a copy of the GNU General Public License ## along with this program. If not, see <https://www.gnu.org/licenses/>. ## We want to disable the Yacc rebuild rule when ## 1. AM_MAINTAINER_MODE is used, and ## 2. --enable-maintainer-mode is not specified, and ## 3. parser.c already exist, and ## 4. parser.y and parser.c are distributed. ## Point #3 is because "make maintainer-clean" erases parser.c, yet ## the GNU Coding Standards require that ./configure; make works even ## after that. ## Point #4 is because parsers listed in nodist__SOURCES are always ## built on the user's side, so it makes no sense to disable them. ## ## Points #1, #2, #3 are solved by unconditionally prefixing the rule ## with $(am__skipyacc) defined below only when needed. ## ## Point #4 requires a condition on whether parser.y/parser.c are ## distributed or not. We cannot have a generic rule that works in ## both cases, so we ensure in automake that nodist_ parsers always ## use non-generic rules. if %?FIRST% if %?MAINTAINER-MODE% @MAINTAINER_MODE_FALSE@am__skipyacc = test -f $@ \|\| endif %?MAINTAINER-MODE% ## The 's/c$/h/' substitution must* be the last one. am__yacc_c2h = sed -e s/cc$$/hh/ -e s/cpp$$/hpp/ -e s/cxx$$/hxx/ \ -e s/c++$$/h++/ -e s/c$$/h/ endif %?FIRST% ?GENERIC?%EXT%%DERIVED-EXT%: ?!GENERIC?%OBJ%: %SOURCE% ?GENERIC? %VERBOSE%$(am__skipyacc) $(SHELL) $(YLWRAP) %SOURCE% y.tab.c %OBJ% y.tab.h `echo %OBJ% \| $(am__yacc_c2h)` y.output %BASE%.output -- %COMPILE% ?!GENERIC? %VERBOSE% \ ?!GENERIC??DIST_SOURCE? $(am__skipyacc) \ ## For non-suffix rules, we must emulate a VPATH search on %SOURCE%. ?!GENERIC? $(SHELL) $(YLWRAP) `test -f '%SOURCE%' \|\| echo '$(srcdir)/'`%SOURCE% y.tab.c %OBJ% y.tab.h `echo %OBJ% \| $(am__yacc_c2h)` y.output %BASE%.output -- %COMPILE%	2.35 KB	2020-01-01 19:43

Edit File:

Terminal