Wala shell

Advanced PHP File Manager

Server IP: 127.0.0.1 | PHP Version: 8.3.30 | Domains Hosted: 54

Name	Size	Last Modified
📁 ..	-	2026-04-03 07:58
📄 admpass.sh #!/bin/sh CUR_DIR=`dirname "$0"` cd $CUR_DIR CUR_DIR=`pwd` SUCC=0 cat <<EOF Please specify the user name of administrator. This is the user name required to login the administration Web interface. EOF printf "%s" "User name [admin]: " read ADMIN_USER if [ "x$ADMIN_USER" = "x" ]; then ADMIN_USER=admin fi cat <<EOF Please specify the administrator's password. This is the password required to login the administration Web interface. EOF while [ $SUCC -eq "0" ]; do printf "%s" "Password: " stty -echo read PASS_ONE stty echo echo "" if [ `expr "$PASS_ONE" : '.*'` -ge 6 ]; then printf "%s" "Retype password: " stty -echo read PASS_TWO stty echo echo "" if [ "x$PASS_ONE" = "x$PASS_TWO" ]; then SUCC=1 else echo "" echo "[ERROR] Sorry, passwords does not match. Try again!" echo "" fi else echo "" echo "[ERROR] Sorry, password must be at least 6 charactors!" echo "" fi done # generate password file ENCRYPT_PASS=`$CUR_DIR/../fcgi-bin/admin_php5 -q $CUR_DIR/htpasswd.php $PASS_ONE` echo "$ADMIN_USER:$ENCRYPT_PASS" > $CUR_DIR/../conf/htpasswd if [ $? -eq 0 ]; then echo "Administrator's username/password is updated successfully!" fi	1.17 KB	2026-04-03 07:58
📄 ap_lsws.sh.in #!/bin/sh ARGS="$@" ARG1="$1" LSWS_HOME=%LSWS_HOME% APACHE_BIN=%APACHE_BIN% CTRL_APACHE=%CTRL_APACHE% APACHE=%APACHE_BIN%_ls_bak LSWS=$LSWS_HOME/bin/lswsctrl PARAM_LOG=$LSWS_HOME/logs/ap_cmd_param.log APACHE_STATE=$LSWS_HOME/admin/cgid/apache_state ulimit -v unlimited 2>/dev/null if [ ! -f $LSWS ]; then mv $APACHE $APACHE_BIN $APACHE_BIN "$@" exit $? fi echo "`date`: $@" 2>/dev/null >> $PARAM_LOG if [ "x$ARG1" = 'x-DSSL' ] \|\| [ "x$ARG1" = 'x-DFOREGROUND' ]; then shift ARG1=$1 fi if [ "x$ARG1" = 'x' ]; then service lsws restart if [ "x$CTRL_APACHE" = "x1" ]; then $APACHE "$@" fi elif [ "x$ARG1" = 'x-k' ]; then ARG2=$2 case $ARG2 in start\|startssl\|sslstart\|start-SSL) echo "START" > $APACHE_STATE service lsws restart ERR=$? if [ "x$CTRL_APACHE" = "x1" ]; then $APACHE "$@" fi exit $ERR ;; stop\|graceful-stop) # never stop LSWS here, use "service lsws stop" instead # have to stop lsws or make cPanel belive apache is stopped, # otherwise cpanel will send signal "9" $LSWS stophttpd if [ "x$CTRL_APACHE" == "x1" ]; then $APACHE "$@" else echo "" fi ;; restart\|graceful) echo "START" > $APACHE_STATE service lsws restart if [ "x$CTRL_APACHE" = "x1" ]; then $APACHE "$@" fi ;; *) $APACHE "$@" esac else if [ "x$ARG1" = "xuninstall" ]; then if [ "x$CTRL_APACHE" = "x0" ]; then service lsws stop sleep 1 fi mv $APACHE $APACHE_BIN $APACHE_BIN elif [ "x$ARG1" = "xinstall" ]; then if [ "x$CTRL_APACHE" = "x0" ]; then pkill `basename $APACHE_BIN` fi echo "START" > $APACHE_STATE service lsws start else $APACHE "$@" fi fi ERROR=$? exit $ERROR	1.82 KB	2026-04-03 07:58
📄 awstats_install.sh CURDIR=`dirname "$0"` cd $CURDIR CURDIR=`pwd` LSWSHOME=`dirname $CURDIR` LSWSHOME=`dirname $LSWSHOME` INST_USER=`id` INST_USER=`expr "$INST_USER" : 'uid=.($.$) gid=.*'` AWS_VER=7.9 cd $LSWSHOME/add-ons if [ -f $LSWSHOME/add-ons/awstats-$AWS_VER/wwwroot/cgi-bin/awstats.pl ]; then echo "[INFO] Found AWStats $AWS_VER at $LSWSHOME/add-ons/awstats-$AWS_VER." else if [ ! -f $LSWSHOME/add-ons/awstats-$AWS_VER.tar.gz ]; then wget --timeout=5 "http://prdownloads.sourceforge.net/sourceforge/awstats/awstats-$AWS_VER.tar.gz" if [ $? -ne 0 ]; then echo "WGET failed, try curl" curl -L "http://prdownloads.sourceforge.net/sourceforge/awstats/awstats-$AWS_VER.tar.gz" -o awstats-$AWS_VER.tar.gz if [ $? -ne 0 ]; then curl -L "http://prdownloads.sourceforge.net/sourceforge/awstats/awstats-$AWS_VER.tar.gz" -o awstats-$AWS_VER.tar.gz if [ $? -ne 0 ]; then cat <<EOF [ERROR] Failed to download AWStats $AWS_VER package, please download AWStats $AWS_VER package manually from http://www.awstats.org/ to '$LSWSHOME/add-ons/' directory, then expand the package there. EOF exit 1 fi fi fi fi gunzip -c awstats-$AWS_VER.tar.gz \| tar xf - if [ $? -ne 0 ]; then cat <<EOF [ERROR] Failed to expand $LSWSHOME/add-ons/awstats-$AWS_VER.tar.gz. Please expand it manually. EOF exit 1 fi fi DIRS=`find ./ -name awstats-$AWS_VER -type d` chmod 0755 $DIRS if [ $INST_USER = "root" ]; then chown -R root:root awstats-$AWS_VER if [ $? -ne 0 ]; then chown -R root:wheel awstats-$AWS_VER fi fi if [ -L $LSWSHOME/add-ons/awstats ]; then echo "[INFO] Removing old symbolic link." rm -f $LSWSHOME/add-ons/awstats fi echo "[INFO] Creating a symbolic link from './awstats-$AWS_VER' to './awstats'" ln -sf ./awstats-$AWS_VER $LSWSHOME/add-ons/awstats if [ $? -eq 0 ]; then cat <<EOF [OK] AWStats $AWS_VER has been successfully installed as a litespeed add-on module. EOF else cat <<EOF [ERROR] Failed to create a symbolic link from './awstats-$AWS_VER' to './awstats', please create it manually. EOF exit 1 fi	2.06 KB	2026-04-03 07:58
📄 build_ap_wrapper.sh CURDIR=`dirname "$0"` cd $CURDIR CURDIR=`pwd` LSWSHOME=`dirname $CURDIR` LSWSHOME=`dirname $LSWSHOME` if [ "x$1" = "x" ]; then cat <<EOF Usage: $0 <path_to_apache_binary> [0\|1] the first parameter is the path to Apache httpd binary, The second parameter is optional, which control whether to run Apache and LSWS at the same time. Default is '0' - No. EOF exit 1 fi if [ "x$2" = "x1" ]; then CTRL_APACHE=1 else CTRL_APACHE=0 fi sed -e "s:%LSWS_HOME%:$LSWSHOME:" \ -e "s:%APACHE_BIN%:$1:" \ -e "s:%CTRL_APACHE%:$CTRL_APACHE:" "./ap_lsws.sh.in" > "./ap_lsws.sh" chmod 0755 ./ap_lsws.sh	624 B	2026-04-03 07:58
📄 chroot.sh #!/bin/sh OS=`uname -s` HW=`uname -i` CHROOT=$1 EXECUTABLE=$2 if [ "x$CHROOT" = "x" ]; then cat <<EOF Usage: chrootEnv.sh <chroot path> [path_to_binary] EOF exit 1 fi CUR_USER=`id` CUR_USER=`expr "$CUR_USER" : 'uid=.($.$) gid=.'` if [ $CUR_USER != "root" ]; then echo "[ERROR] You must be root user to setup chroot environment!" fi if [ `expr "$CHROOT" : '\/'` -eq 0 ]; then echo "[ERROR] Chroot path must be absolute path!" exit 1 fi if [ $CHROOT = "/" ]; then echo "It is not necessory to setup the environment when chroot to '/'." exit 0 fi if [ -f $CHROOT ]; then echo "[ERROR] chroot directory does not exist!" exit 1 fi copy_library() { ldd $EXECUTABLE > /tmp/dynlibs while read dynlib do if [ "x$OS" != "xSunOS" ]; then libname=`expr "$dynlib" : '$.$ => .* .'` libpath=`expr "$dynlib" : '. => $.$ .'` else libname=`expr "$dynlib" : '[ ]$.$ =>.'` libpath=`expr "$dynlib" : '. =>[ ]$.$'` fi if [ "x$libpath" != "x" ]; then if [ "$libpath" = "/usr/lib/$libname" ]; then #if [ ! -f "$CHROOT/usr/lib/$libname" ] && [ ! -f "$CHROOT/$libname" ]; then cp $libpath $CHROOT/usr/lib #fi elif [ "$libpath" = "/usr/lib64/$libname" ]; then #if [ ! -f "$CHROOT/usr/lib64/$libname" ] && [ ! -f "$CHROOT/$libname" ]; then cp $libpath $CHROOT/usr/lib64 #fi elif [ "$libpath" = "/lib64/$libname" ]; then #if [ ! -f "$CHROOT/lib64/$libname" ] && [ ! -f "$CHROOT/$libname" ]; then cp $libpath $CHROOT/lib64 #fi else #if [ ! -f "$CHROOT/lib/$libname" ] && [ ! -f "$CHROOT/$libname" ]; then cp $libpath $CHROOT/lib #fi fi fi done < /tmp/dynlibs rm /tmp/dynlibs } copy_perl() { cp /usr/bin/perl $CHROOT/usr/bin EXECUTABLE=/usr/bin/perl copy_library if [ "x$OS" = "xFreeBSD" ]; then mkdir $CHROOT/usr/libdata cp -R /usr/libdata/perl $CHROOT/usr/libdata elif [ "x$OS" = "xSunOS" ]; then cp -R /usr/perl5 $CHROOT/usr elif [ "x$HW" = "xx86_64" ]; then cp -R /usr/lib64/perl5 $CHROOT/usr/lib64 else cp -R /usr/lib/perl5 $CHROOT/usr/lib fi } update_existing() { cd $CHROOT for f in `find lib lib64 usr/lib usr/lib64 bin usr/bin -type f`; do rsync -av -L /$f ./$f; done rsync -av /etc/pki ./etc/ #NSS required file, otherwise curl breaks FILES="/lib64/libfreeblpriv3.chk /lib64/libfreeblpriv3.so /lib64/libfreebl3.so /lib64/libfreebl3.chk /usr/lib64/libnsssysinit.so /usr/lib64/libnsspem.so /usr/lib64/libnssdbm3.so /usr/lib64/libnssdbm3.chk /usr/lib64/libsoftokn3.so /usr/lib64/libsoftokn3.chk" for f in $FILES ; do rsync -av -L /$f ./$f; done ln -sf ../../lib64/libfreeblpriv3.so $CHROOT/usr/lib64/libfreeblpriv3.so } if [ "x$EXECUTABLE" = 'x' ]; then for req_dir in 'bin' 'lib' 'usr' 'usr/bin' 'usr/lib' 'dev' 'tmp' 'etc' do if [ ! -d "$CHROOT/$req_dir" ]; then mkdir $CHROOT/$req_dir chmod 755 $CHROOT/$req_dir fi done chmod 1777 $CHROOT/tmp if [ "x$HW" = "xx86_64" ]; then for req_dir in 'lib64' 'usr/lib64' do if [ ! -d "$CHROOT/$req_dir" ]; then mkdir $CHROOT/$req_dir chmod 755 $CHROOT/$req_dir fi done fi if [ "x$OS" = "xFreeBSD" ]; then mknod $CHROOT/dev/null c 2 2 mknod $CHROOT/dev/random c 2 3 mknod $CHROOT/dev/urandom c 2 4 mknod $CHROOT/dev/zero c 2 12 mkdir $CHROOT/usr/libexec cp /usr/libexec/ld* $CHROOT/usr/libexec mkdir $CHROOT/usr/share cp -R /usr/share/locale $CHROOT/usr/share elif [ "x$OS" = "xSunOS" ]; then mknod $CHROOT/dev/null c 13 2 mknod $CHROOT/dev/random c 82 0 mknod $CHROOT/dev/urandom c 82 1 #from solaris 10 # mknod $CHROOT/dev/random c 149 0 # mknod $CHROOT/dev/urandom c 149 1 # mknod $CHROOT/dev/poll c 138 0 mknod $CHROOT/dev/zero c 13 12 cp /usr/lib/ld.so.1 /usr/lib/libdl.so.1 /usr/lib/libc.so.1 $CHROOT/usr/lib cp -R /usr/lib/locale $CHROOT/usr/lib else mknod $CHROOT/dev/null c 1 3 mknod $CHROOT/dev/random c 1 8 mknod $CHROOT/dev/urandom c 1 9 mknod $CHROOT/dev/zero c 1 5 if [ "x$OS" = "xLinux" ]; then cp /lib/ld-linux.so.* $CHROOT/lib fi cp /lib/libnss_dns.so.* $CHROOT/lib cp /lib/libnss_files.so.* $CHROOT/lib cp /lib/libnss_nisplus.so.* $CHROOT/lib cp /lib/libtermcap.so.* $CHROOT/lib cp -R /usr/lib/locale $CHROOT/usr/lib cp /etc/netconfig $CHROOT/etc if [ "x$HW" = "xx86_64" ]; then cp /lib64/libnss_dns.so.* $CHROOT/lib64 cp /lib64/libnss_files.so.* $CHROOT/lib64 cp /lib64/libnss_nisplus.so.* $CHROOT/lib64 cp /lib64/libtermcap.so.* $CHROOT/lib64 cp /lib64/ld-* $CHROOT/lib64 fi fi chmod 666 $CHROOT/dev/* cp /etc/localtime $CHROOT/etc/ cp /etc/resolv.conf $CHROOT/etc/ cp /etc/hosts $CHROOT/etc/ #chown root $CHROOT #chmod 700 $CHROOT touch $CHROOT/etc/passwd $CHROOT/etc/group $CHROOT/etc/shadow chmod 400 $CHROOT/etc/shadow for req_bin in 'dirname' 'ldd' 'cat' 'echo' 'date' 'sh' do if [ ! -f "$CHROOT/bin/$req_bin" ]; then if [ -f "/bin/$req_bin" ]; then cp /bin/$req_bin $CHROOT/bin chmod 755 $CHROOT/bin/$req_bin EXECUTABLE=/bin/$req_bin elif [ -f "/usr/bin/$req_bin" ]; then cp /usr/bin/$req_bin $CHROOT/usr/bin chmod 755 $CHROOT/usr/bin/$req_bin EXECUTABLE=/usr/bin/$req_bin elif [ -f "/sbin/$req_bin" ]; then cp /sbin/$req_bin $CHROOT/bin chmod 755 $CHROOT/bin/$req_bin EXECUTABLE=/sbin/$req_bin elif [ -f "/usr/sbin/$req_bin" ]; then cp /usr/sbin/$req_bin $CHROOT/usr/bin chmod 755 $CHROOT/usr/bin/$req_bin EXECUTABLE=/usr/sbin/$req_bin fi copy_library fi done elif [ "x$EXECUTABLE" = 'xperl' ]; then copy_perl elif [ "x$EXECUTABLE" = 'xupdate_chroot' ]; then update_existing else copy_library fi	7.31 KB	2026-04-03 07:58
📄 cleancache.sh #!/bin/sh #if [ -f '/usr/bin/ionice' ]; then # echo "ionice:" `ionice` 1>&2 #fi clean_cache_dir() { for subdir in '0' '1' '2' '3' '4' '5' '6' '7' '8' '9' 'a' 'b' 'c' 'd' 'e' 'f' do find "$1/$subdir" -type f -mmin +$2 -delete 2>/dev/null if [ $? -ne 0 ]; then find "$1/$subdir" -type f -mmin +$2 2>/dev/null \| xargs rm -f fi # clean directory find "$1/$subdir" -empty -delete 2>/dev/null if [ $? -ne 0 ]; then find "$1/$subdir" -empty 2>/dev/null \| xargs rm -rf fi #fi done } CUR_DIR=`dirname "$0"` cd $CUR_DIR CUR_DIR=`pwd` find "$CUR_DIR/../../admin/tmp" -type s -atime +1 -delete 2>/dev/null if [ $? -ne 0 ]; then find "$CUR_DIR/../../admin/tmp" -type s -atime +1 2>/dev/null \| xargs rm -f fi find "/tmp/lshttpd/swap" -type s -atime +1 -delete 2>/dev/null if [ $? -ne 0 ]; then find "/tmp/lshttpd/swap" -type s -atime +1 2>/dev/null \| xargs rm -f fi find "/dev/shm/lsws/ocspcache" -type s -mtime +7 -delete 2>/dev/null if [ $? -ne 0 ]; then find "/dev/shm/lsws/ocspcache" -type s -mtime +7 2>/dev/null \| xargs rm -f fi #if [ -f '/usr/bin/ionice' ]; then # echo "ionice:" `ionice` 1>&2 #fi max_age_mins=1440 while [ $# -gt 0 ] do root_dir=$1 shift if [ "x$root_dir" = 'x' ]; then exit 1 fi if [ ! -d "$root_dir" ]; then exit 2 fi clean_cache_dir "$root_dir" 1440 clean_cache_dir "$root_dir/priv" 60 done	1.46 KB	2026-04-03 07:58
📄 cleanlitemage.sh #!/bin/sh #if [ -f '/usr/bin/ionice' ]; then # echo "ionice:" `ionice` 1>&2 #fi clean_cache_dir() { for subdir in '0' '1' '2' '3' '4' '5' '6' '7' '8' '9' 'a' 'b' 'c' 'd' 'e' 'f' do find "$1/$subdir" -type f -mmin +$2 -delete 2>/dev/null if [ $? -ne 0 ]; then find "$1/$subdir" -type f -mmin +$2 2>/dev/null \| xargs rm -f fi # clean directory find "$1/$subdir" -empty -delete 2>/dev/null if [ $? -ne 0 ]; then find "$1/$subdir" -empty 2>/dev/null \| xargs rm -rf fi #fi done } if [ "x$1" = 'x' ]; then echo "Usage:" echo " cleanlitemage.sh [-priv <age_mins>] [-pub <age_mins>] <litemage_cache_dir> ... " echo "" echo "Note:" echo " private cache max_age default is 60 minutes." echo " private cache max_age must be > 0 if set." echo " public cache max_age default is 0 minutes, meaning public cache will not be purged." echo " public cache max_age must be > 10 if set." echo " <litemage_cache_dir> is the root directory of LiteMage cache storage" echo " and should contain the 'priv' directory." echo " multiple cache root directories can be added." exit 1 fi CUR_DIR=`dirname "$0"` cd $CUR_DIR CUR_DIR=`pwd` private_mins=60 public_mins=0 if [ "x$1" == "x-priv" ]; then shift if [ "$1" -eq "$1" ] 2>/dev/null then echo "private max age is $1" 1>/dev/null else echo "'-priv' must be followed by max_age for private cache in minutes." exit 1 fi private_mins=$1 shift fi if [ "x$1" == "x-pub" ]; then shift if [ "$1" -eq "$1" ] 2>/dev/null then echo "public max age is $1" 1>/dev/null else echo "'-pub' must be followed by max_age for public cache in minutes." exit 1 fi public_mins=$1 shift fi if [ "x$1" = 'x' ]; then echo "ERROR: no cache root directory provided." exit 1 fi while [ $# -gt 0 ] do root_dir=$1 shift if [ ! -d "$root_dir" ]; then echo "ERROR: $root_dir directory does not exists." continue fi if [ $public_mins -gt 10 ]; then clean_cache_dir "$root_dir" $public_mins fi if [ $private_mins -gt 0 ]; then if [ ! -d "$root_dir/priv" ]; then echo "NOTICE: '$root_dir/priv' directory does not exist, skip." continue fi clean_cache_dir "$root_dir/priv" $private_mins fi done	2.4 KB	2026-04-03 07:58
📄 cp_switch_ws.sh #!/bin/bash ############################################################################## # Switch between Apache and LiteSpeed Web Server under control panel environment # # @author LiteSpeed Technologies, Inc. (https://www.litespeedtech.com) # @copyright (c) 2016-2026 ############################################################################## check_errs() { if [ "$1" -ne 0 ] ; then echo "[ERROR] ${2}" exit "$1" fi } display_usage() { cat <<EOF cp_switch_ws.sh - Switch between Apache and LiteSpeed under control panel environments. Currently supported control panels are cPanel, Plesk, DirectAdmin, and CentOS Web Panel. CustomBuild 2.0 is required to be installed prior for DirectAdmin detection. Usage: cp_switch_ws.sh apache\|lsws Param: targeted web server. Fixed value either "apache" or "lsws" EOF exit 1 } detect_control_panel() { # detect cPanel if [ -d "/usr/local/cpanel/whostmgr" ] ; then CP="WHM" cp_init_var echo "Detected cPanel WHM Environment" # detect Plesk elif [ -e "/opt/psa/version" ] \|\| [ -e "/usr/local/psa/version" ] ; then CP="PSA" cp_init_var echo "Detected Plesk Environment" # detect DirectAdmin elif [ -d "/usr/local/directadmin" ] ; then CP="DA" DA_DIR="/usr/local/directadmin/custombuild" echo "Detected DirectAdmin Environment" # detect CentOS Web Panel elif [ -d "/usr/local/cwpsrv" ] ; then CP="CWP" echo "Detected CentOS Web Panel Environment" else check_errs 1 "Cannot detect control panel environment. Only cPanel WHM, Plesk, DirectAdmin are checked for now." fi } cp_SetRunOnBoot() { local chkconfigPath chkconfigPath=$(which chkconfig) $chkconfigPath lsws off $chkconfigPath httpd on return 0 } cp_msg_exit() { echo "$2" exit "${1}" } cp_init_var() { OS=$(uname -s) if [ "$OS" = "FreeBSD" ] \|\| [ "$OS" = "Darwin" ] ; then PS_CMD="ps -ax" else PS_CMD="ps -ef" fi if [ "$OS" = "FreeBSD" ] ; then LSWS_CTLCMD="/usr/local/etc/rc.d/lsws.sh" AP_CTLCMD="/usr/local/etc/rc.d/httpd" else LSWS_CTLCMD="/sbin/service lsws" AP_CTLCMD="/sbin/service httpd" fi LSWS_PIDFILE="/tmp/lshttpd/lshttpd.pid" CONF="${LSWSHOME}/conf/httpd_config.xml" AP_PROC="httpd" LSWS_SWITCH_FLAG="${LSWSHOME}/admin/tmp/.switched2lsws" if [ "$CP" = "PSA" ] && [ -e "/etc/debian_version" ] ; then LSWS_CTLCMD="/usr/sbin/service lsws" AP_CTLCMD="/usr/sbin/service apache2" AP_PROC="apache2" if ! . "/etc/apache2/envvars" 2>/dev/null; then . "/etc/apache2/envvars" fi AP_PIDFILE="$APACHE_PID_FILE" fi } cp_stop_lsws() { if [ "$CP" = "WHM" ] ; then pkill wswatch.sh 2>/dev/null fi $LSWS_CTLCMD stop $AP_CTLCMD stop 1>/dev/null 2>&1 RETRY=30 LSPID=1 while [ $RETRY -gt 0 ] && [ "$LSPID" -ne 0 ] do ((RETRY--)) sleep 1 cp_detect_lsws_pid done if [ "$LSPID" -eq 0 ] ; then pkill -9 lshttpd pkill -9 litespeed echo "LiteSpeed Stopped." else echo "LiteSpeed is still running. Fail to stop within 30 secs." echo "Will use pkill command to stop" pkill -9 lshttpd pkill -9 litespeed sleep 1 cp_detect_lsws_pid if [ "$LSPID" -eq 0 ] ; then echo "LiteSpeed Stopped." else echo "LiteSpeed is still running. Fail to stop using kill command." fi fi } cp_detect_lsws_pid() { LSPID=0 if [ -f "$LSWS_PIDFILE" ] ; then FPID=$(cat "$LSWS_PIDFILE") if [ "x$FPID" != "x" ] ; then PL=$($PS_CMD \| grep -w 'lshttpd\\|litespeed' \| grep -v grep \| grep -w "$FPID") if [ "x$PL" != "x" ] ; then LSPID=$FPID fi fi fi } # # start LiteSpeed # cp_start_fake_apache() { $AP_CTLCMD start 2>&1 RETRY=30 LSPID=0 while [ $RETRY -gt 0 ] && [ "$LSPID" -eq 0 ] do ((RETRY--)) sleep 1 cp_detect_lsws_pid done } remove_bak_bak() { if [ -f "$1$2" ]; then mv "$1$2" "$1$2_restore_done" fi } cpanel_apache_wrapper_helper() { RESTORE=$1 NEED_PROTECT=$(/usr/local/cpanel/3rdparty/bin/perl -MCpanel::Config::Httpd::Perms -e'print Cpanel::Config::Httpd::Perms::webserver_runs_as_user();') if [ "$RESTORE" -eq 1 ] ; then # restore Apache binary Files if [ -f "/usr/local/apache/bin/${AP_PROC}_ls_bak" ] ; then mv -f "/usr/local/apache/bin/${AP_PROC}_ls_bak" "/usr/local/apache/bin/${AP_PROC}" elif [ -f "/usr/local/apache/bin/${AP_PROC}_ls_bak_bak" ] ; then cp -f "/usr/local/apache/bin/${AP_PROC}_ls_bak_bak" "/usr/local/apache/bin/${AP_PROC}" fi remove_bak_bak "/usr/local/apache/bin/${AP_PROC}" "_ls_bak_bak" if [ -f "/usr/sbin/${AP_PROC}_ls_bak" ] ; then mv -f "/usr/sbin/${AP_PROC}_ls_bak" "/usr/sbin/${AP_PROC}" elif [ -f "/usr/sbin/${AP_PROC}_ls_bak_bak" ] ; then cp -f "/usr/sbin/${AP_PROC}_ls_bak_bak" "/usr/sbin/${AP_PROC}" fi remove_bak_bak "/usr/sbin/${AP_PROC}" "_ls_bak_bak" if [ -f "/scripts/restartsrv_httpd_ls_bak" ] ; then mv -f "/scripts/restartsrv_httpd_ls_bak" "/scripts/restartsrv_httpd" elif [ -f "/scripts/restartsrv_httpd_ls_bak_bak" ] ; then cp -f "/scripts/restartsrv_httpd_ls_bak_bak" "/scripts/restartsrv_httpd" fi remove_bak_bak "/scripts/restartsrv_httpd" "_ls_bak_bak" if [ "$NEED_PROTECT" -eq 1 ] ; then /scripts/enablefileprotect echo "Added fileprotect for Apache" fi if [ ! -f "/etc/cpanel/ea4/paths.conf" ] \|\| ! grep -q '[^[:space:]]' /etc/cpanel/ea4/paths.conf ; then if [ -f '/etc/cpanel/ea4/paths.conf_ls_bak' ]; then mv '/etc/cpanel/ea4/paths.conf_ls_bak' '/etc/cpanel/ea4/paths.conf' fi fi if [ -f "/etc/cpanel/ea4/paths.conf" ]; then sed -i -e 's#/usr/local/lsws/bin/lswsctrl#/usr/sbin/apachectl#' /etc/cpanel/ea4/paths.conf fi # restore rc file if [ "$SYSTEMDDIR" != "" ]; then if [ -e "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak" ] ; then mv -f "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak" "${SYSTEMDDIR}/${AP_PROC}.service" elif [ -e "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak_bak" ] ; then cp -f "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak_bak" "${SYSTEMDDIR}/${AP_PROC}.service" fi remove_bak_bak "${SYSTEMDDIR}/${AP_PROC}.service" ".ls_bak_bak" systemctl daemon-reload fi if [ "$INIT_DIR" != "" ]; then if [ -e "${INIT_DIR}/${AP_PROC}.ls_bak" ] ; then mv -f "${INIT_DIR}/${AP_PROC}.ls_bak" "${INIT_DIR}/${AP_PROC}" elif [ -e "${INIT_DIR}/${AP_PROC}.ls_bak_bak" ] ; then cp -f "${INIT_DIR}/${AP_PROC}.ls_bak_bak" "${INIT_DIR}/${AP_PROC}" fi remove_bak_bak "${INIT_DIR}/${AP_PROC}" ".ls_bak_bak" fi if [ -f "$LSWS_SWITCH_FLAG" ] ; then /bin/rm -f "$LSWS_SWITCH_FLAG" fi else if [ "$NEED_PROTECT" -eq 1 ] ; then /scripts/disablefileprotect echo "fileprotect removed, not needed by LiteSpeed" fi if [ ! -f "/etc/cpanel/ea4/paths.conf" ] \|\| ! grep -q '[^[:space:]]' /etc/cpanel/ea4/paths.conf ; then if [ -f '/etc/cpanel/ea4/paths.conf_ls_bak' ]; then mv '/etc/cpanel/ea4/paths.conf_ls_bak' '/etc/cpanel/ea4/paths.conf' fi fi if [ -f "/etc/cpanel/ea4/paths.conf" ]; then sed -i -e 's#/usr/sbin/apachectl#/usr/local/lsws/bin/lswsctrl#' /etc/cpanel/ea4/paths.conf fi # add rc wrapper if [ "$SYSTEMDDIR" != "" ] ; then # copy the correct file again to avoid wrong data "${LSWSHOME}/admin/misc/rc-inst.sh" if [ ! -e "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak" ] ; then mv -f "${SYSTEMDDIR}/${AP_PROC}.service" "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak" fi ln -sf "${SYSTEMDDIR}/lshttpd.service" "${SYSTEMDDIR}/${AP_PROC}.service" systemctl daemon-reload fi if [ "$INIT_DIR" != "" ] ; then if [ ! -e "${INIT_DIR}/${AP_PROC}.ls_bak" ] ; then mv -f "${INIT_DIR}/${AP_PROC}" "${INIT_DIR}/${AP_PROC}.ls_bak" fi ln -sf ./lsws "${INIT_DIR}/${AP_PROC}" fi # set flag touch "$LSWS_SWITCH_FLAG" fi } plesk_apache_wrapper_helper() { RESTORE=$1 if [ "$RESTORE" -eq 1 ] ; then # restore Apache binary Files if [ -f "/usr/sbin/${AP_PROC}_ls_bak" ] ; then mv -f "/usr/sbin/${AP_PROC}_ls_bak" "/usr/sbin/${AP_PROC}" elif [ -f "/usr/sbin/${AP_PROC}_ls_bak_bak" ] ; then cp -f "/usr/sbin/${AP_PROC}_ls_bak_bak" "/usr/sbin/${AP_PROC}" fi remove_bak_bak "/usr/sbin/${AP_PROC}" "_ls_bak_bak" # restore rc file if [ "$SYSTEMDDIR" != "" ]; then if [ -e "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak" ] ; then mv -f "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak" "${SYSTEMDDIR}/${AP_PROC}.service" elif [ -e "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak_bak" ] ; then cp -f "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak_bak" "${SYSTEMDDIR}/${AP_PROC}.service" fi remove_bak_bak "${SYSTEMDDIR}/${AP_PROC}.service" ".ls_bak_bak" if [ -d "${SYSTEMDDIR}/lshttpd.service.d" ]; then mv -f "${SYSTEMDDIR}/lshttpd.service.d" "${SYSTEMDDIR}/${AP_PROC}.service.d" fi if [ -d "${SYSTEMDDIR}/${AP_PROC}.service.d.ls_bak" ]; then mv -f "${SYSTEMDDIR}/${AP_PROC}.service.d.ls_bak" "${SYSTEMDDIR}/${AP_PROC}.service.d" fi if [ -d "/etc/systemd/system/${AP_PROC}.service.d.ls_bak" ]; then mv -f "/etc/systemd/system/${AP_PROC}.service.d.ls_bak" "/etc/systemd/system/${AP_PROC}.service.d" fi systemctl daemon-reload systemctl disable lshttpd systemctl enable "${AP_PROC}" fi if [ "$INIT_DIR" != "" ] ; then if [ -e "${INIT_DIR}/${AP_PROC}.ls_bak" ] ; then mv -f "${INIT_DIR}/${AP_PROC}.ls_bak" "${INIT_DIR}/${AP_PROC}" elif [ -e "${INIT_DIR}/${AP_PROC}.ls_bak_bak" ] ; then cp -f "${INIT_DIR}/${AP_PROC}.ls_bak_bak" "${INIT_DIR}/${AP_PROC}" fi remove_bak_bak "${INIT_DIR}/${AP_PROC}" ".ls_bak_bak" if [ "$SYSTEMDDIR" != "" ] ; then systemctl daemon-reload fi fi if [ -f "$LSWS_SWITCH_FLAG" ] ; then /bin/rm -f "$LSWS_SWITCH_FLAG" fi else # add rc wrapper if [ "$SYSTEMDDIR" != "" ] ; then if [ ! -e "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak" ] ; then systemctl disable "${AP_PROC}" systemctl enable lshttpd mv -f "${SYSTEMDDIR}/${AP_PROC}.service" "${SYSTEMDDIR}/${AP_PROC}.service.ls_bak" fi ln -sf "${SYSTEMDDIR}/lshttpd.service" "${SYSTEMDDIR}/${AP_PROC}.service" if [ -d "${SYSTEMDDIR}/${AP_PROC}.service.d" ]; then mv -f "${SYSTEMDDIR}/${AP_PROC}.service.d" "${SYSTEMDDIR}/${AP_PROC}.service.d.ls_bak" fi if [ -d "/etc/systemd/system/${AP_PROC}.service.d" ]; then mv -f "/etc/systemd/system/${AP_PROC}.service.d" "/etc/systemd/system/${AP_PROC}.service.d.ls_bak" fi systemctl daemon-reload fi if [ "$INIT_DIR" != "" ] ; then if [ ! -e "${INIT_DIR}/${AP_PROC}.ls_bak" ] ; then mv -f "${INIT_DIR}/${AP_PROC}" "${INIT_DIR}/${AP_PROC}.ls_bak" fi cp "${INIT_DIR}/lsws" "${INIT_DIR}/${AP_PROC}" #ln -sf ./lsws "${INIT_DIR}/${AP_PROC}" if [ "$SYSTEMDDIR" != "" ] ; then systemctl daemon-reload fi fi # set flag touch "$LSWS_SWITCH_FLAG" fi } cp_apache_wrapper() { RESTORE=$1 INIT_DIR="" for path in "/etc/init.d" "/etc/rc.d/init.d" do if [ "$INIT_DIR" = "" ] \ && { [ -e "${path}/${AP_PROC}" ] \|\| [ -e "${path}/${AP_PROC}.ls_bak" ] ;} then INIT_DIR="$path" fi done # use systemd if possible, need to use same method as apache SYSTEMDDIR="" for path in "/usr/lib/systemd/system" "/lib/systemd/system" "/etc/systemd/system" do if [ "$SYSTEMDDIR" = "" ] \ && [ -d "$path" ] \ && [ -e "${path}/${AP_PROC}.service" ] ; then SYSTEMDDIR="$path" fi done if [ "$CP" = "WHM" ] ; then cpanel_apache_wrapper_helper "$RESTORE" elif [ "$CP" = "PSA" ] ; then plesk_apache_wrapper_helper "$RESTORE" fi } cp_detect_ap_pid() { APPID=0 FPID=$($PS_CMD \| grep -w "${AP_PROC} \\|${AP_PROC}$\\|^${AP_PROC}$" \ \| grep -v "lscgid\\|litespeed\\|lshttpd\\|grep\\|/usr/bin/logger" \| grep -w "root" \ \| awk '{print $2}') if [ "x$FPID" != "x" ] ; then APPID=$FPID fi } cp_stop_apache() { $AP_CTLCMD stop RETRY=30 APPID=1 while [ $RETRY -gt 0 ] && [ "$APPID" -ne 0 ] do ((RETRY--)) sleep 1 cp_detect_ap_pid done if [ "$APPID" -eq 0 ] ; then echo "Apache Stopped." else echo "Apache is still running. Fail to stop within 30 secs." echo "Will use pkill command to stop" pkill -9 "$AP_PROC" sleep 1 cp_detect_ap_pid if [ "$APPID" -eq 0 ] ; then echo "Apache Stopped." else echo "Apache is still running. Fail to stop using kill command." fi fi } cp_change_port_offset() { PORT_OFFSET=$1 if [ ! -f "$CONF" ] ; then check_errs 1 "${0}: invalid conf file directory!" fi /bin/cp -f "$CONF" "${CONF}.orig" sed -e "s/<apachePortOffset>.<\/apachePortOffset>/<apachePortOffset>${PORT_OFFSET}<\/apachePortOffset>/" "${CONF}.orig" > "$CONF" check_errs $? "${0}: sed command error, please try to modify apache port offset manually from config file ${CONF}" /bin/rm -f "${CONF}.orig" } cp_SwitchToLiteSpeed() { cp_change_port_offset 0 cp_stop_apache if [ "$CP" = "WHM" ] ; then #sleep 8 pkill -9 httpd elif [ "$CP" = "PSA" ] ; then cp_detect_lsws_pid fi cp_apache_wrapper 0 if [ "$CP" = "WHM" ] ; then /usr/local/cpanel/bin/whmapi1 configureservice service=httpd enabled=1 monitored=1 fi cp_start_fake_apache if [ "$LSPID" -gt 0 ] ; then if [ "$CP" = "WHM" ] ; then pkill wswatch.sh 2>/dev/null cd /usr/local/lsws/logs nohup ../bin/wswatch.sh </dev/null >/dev/null 2>&1 & fi cp_msg_exit 0 "LiteSpeed started successfully." fi echo "LiteSpeed is not up within 30 secs, try again by removing /tmp/lshttpd/." pkill -9 lshttpd pkill -9 litespeed /bin/rm -rf "/tmp/lshttpd" cp_start_fake_apache # wrapper needs to run after lsws start if [ "$LSPID" -gt 0 ] ; then if [ "$CP" = "WHM" ] ; then pkill wswatch.sh 2>/dev/null cd /usr/local/lsws/logs nohup ../bin/wswatch.sh 2>/dev/null & fi cp_msg_exit 0 "LiteSpeed started successfully." else cp_apache_wrapper 1 check_errs 1 "LiteSpeed is not up within 60 secs, please check the error log and try again." fi } cp_SwitchToApache() { if [ "$CP" = "WHM" ] ; then pkill wswatch.sh 2>/dev/null fi cp_detect_lsws_pid if [ "$LSPID" -gt 0 ] ; then echo "LiteSpeed is running, stop it first." cp_stop_lsws if [ "$LSPID" -gt 0 ] ; then check_errs 1 "Abort." fi fi cp_detect_ap_pid if [ "$APPID" -gt 0 ] ; then if [ ! -f "$LSWS_SWITCH_FLAG" ] ; then return fi # if running, stop first cp_stop_apache fi # restore Apache Files, wrapper needs to run before Apache start cp_apache_wrapper 1 # wait 1 sec before start apache sleep 1 if [ "$CP" = "WHM" ] ; then /usr/local/cpanel/bin/whmapi1 configureservice service=httpd enabled=1 monitored=1 # # start Apache # # does not change the memory limits, does not work well. # $AP_CTLCMD start # # call a cPanel script /scripts/restartsrv_httpd elif [ "$CP" = "PSA" ] ; then $AP_CTLCMD start 2>&1 fi RETRY=30 APPID=0 while [ $RETRY -gt 0 ] && [ "$APPID" -eq 0 ] do cp_detect_ap_pid ((RETRY--)) sleep 1 done if [ "$APPID" -ne 0 ] ; then cp_msg_exit 0 "Apache started successfully." else check_errs 1 "Apache is not up within 30 secs. Please check the log file." fi } switch_cp() { if [ "$1" = "apache" ] ; then cp_SwitchToApache cp_SetRunOnBoot elif [ "$1" = "lsws" ] ; then cp_SwitchToLiteSpeed cp_SetRunOnBoot fi } switch_da() { cd "${DA_DIR}" pmod1=$(grep "php1_mode" /usr/local/directadmin/custombuild/options.conf \| cut -d = -f 2 \| xargs) pmod2=$(grep "php2_mode" /usr/local/directadmin/custombuild/options.conf \| cut -d = -f 2 \| xargs) pmod3=$(grep "php3_mode" /usr/local/directadmin/custombuild/options.conf \| cut -d = -f 2 \| xargs) pmod4=$(grep "php4_mode" /usr/local/directadmin/custombuild/options.conf \| cut -d = -f 2 \| xargs) if [ "$1" = "apache" ] ; then pkill wswatch.sh ./build set webserver apache IS_CLOUDLINUX=0 if [ -f /etc/redhat-release ]; then OS_NAME=$(awk '{print $1}' < /etc/redhat-release) if [ "${OS_NAME}" == 'CloudLinux' ]; then IS_CLOUDLINUX=1 fi fi if [ "${IS_CLOUDLINUX}" -eq 0 ] && [ -f /etc/os-release ]; then OS_ID=$(grep '^ID=' /etc/os-release \| cut -d '=' -f2 \| tr -d '"') if [ "${OS_ID}" == 'cloudlinux' ]; then IS_CLOUDLINUX=1 fi fi if [ "${IS_CLOUDLINUX}" -eq 0 ] && [ -d /proc/lve ]; then IS_CLOUDLINUX=1 fi if [ "${IS_CLOUDLINUX}" -eq 1 ] ; then ./build set php1_mode lsphp ./build set php2_mode lsphp ./build set php3_mode lsphp ./build set php4_mode lsphp else ./build set php1_mode php-fpm ./build set php2_mode php-fpm ./build set php3_mode php-fpm ./build set php4_mode php-fpm fi ./build set mod_ruid2 no ./build apache else ./build set webserver litespeed if [ "x$pmod1" != "xlsphp" ] ; then ./build set php1_mode lsphp if [ "x$pmod2" != "xlsphp" ] ; then ./build set php2_mode lsphp fi if [ "x$pmod3" != "xlsphp" ] ; then ./build set php3_mode lsphp fi if [ "x$pmod4" != "xlsphp" ] ; then ./build set php4_mode lsphp fi fi ./build litespeed fi } switch_cwp() { if [ "$1" = "apache" ] ; then pkill wswatch.sh stop_running_ws echo "Starting Apache..." if [ -e "/usr/local/apache/bin/httpd_ls_bak" ] ; then mv /usr/local/apache/bin/httpd_ls_bak /usr/local/apache/bin/httpd fi service_manager "start" "httpd" echo "Apache has been started successfully." elif [ "$1" = "lsws" ] ; then stop_running_ws echo "Starting LiteSpeed Enterprise..." service_manager "start" "lsws" echo "LiteSpeed Enterprise has been started successfully." fi } service_manager() { if [ -d "/etc/systemd" ] ; then systemctl "$1" "$2" > /dev/null 2>&1 else service "$2" "$1" > /dev/null 2>&1 fi } stop_running_ws() { local AP_PIDFILE=/usr/local/apache/logs/httpd.pid local LSWS_PIDFILE=/tmp/lshttpd/lshttpd.pid if [ -e "$AP_PIDFILE" ] ; then local AP_PID AP_PID=$(cat $AP_PIDFILE) fi if [ -e "$LSWS_PIDFILE" ] ; then local LSWS_PID LSWS_PID=$(cat $LSWS_PIDFILE) fi if [ -e "$LSWS_PIDFILE" ] && [ "$(ps -ef \| grep -w 'lshttpd\\|litespeed' \| grep -v grep \| grep -w "$LSWS_PID")" != "" ] \|\| [ "$(ps -ef \| grep -w 'lshttpd\\|litespeed' \| grep -v grep)" != "" ] ; then echo "Stopping LiteSpeed Enterprise..." service_manager "stop" "lsws" sleep 1 RETRY=30 CHECK=$(ps -ef \| grep -w 'lshttpd\\|litespeed' \| grep -v grep) while [ "$RETRY" -gt 0 ] && [ "$CHECK" != "" ] ; do RETRY=$((RETRY-1)) sleep 1 CHECK=$(ps -ef \| grep -w 'lshttpd\\|litespeed' \| grep -v grep) done pkill -9 lsphp > /dev/null 2>&1 if [ "$CHECK" != "" ] ; then pkill -9 litespeed > /dev/null 2>&1 pkill -9 lshttpd > /dev/null 2>&1 pkill -9 lscgid > /dev/null 2>&1 sleep 1 fi if [ "$(ps -ef \| grep -w 'lshttpd\\|litespeed' \| grep -v grep)" != "" ] ; then echo "LiteSpeed Enterprise could not be stopped." exit 1 else echo "LiteSpeed Enterprise has been stopped successfully." fi fi if [ -e "$AP_PIDFILE" ] && [ "$(ps -ef \| grep -w "$AP_PID" \| grep httpd \| grep -v grep \| grep -v lscgid)" != "" ] \|\| [ "$(ps -ef \| grep httpd \| grep -v grep \| grep -v lscgid)" != "" ] ; then echo "Stopping Apache..." service_manager "stop" "httpd" sleep 1 RETRY=30 CHECK=$(ps -ef \| grep httpd \| grep -v grep \| grep -v lscgid) while [ "$RETRY" -gt 0 ] && [ "$CHECK" != "" ] ; do ((RETRY--)) sleep 1 CHECK=$(ps -ef \| grep httpd \| grep -v grep \| grep -v lscgid) done if [ "$CHECK" != "" ] ; then pkill -9 httpd > /dev/null 2>&1 sleep 1 fi if [ "$(ps -ef \| grep httpd \| grep -v grep \| grep -v lscgid)" != "" ] ; then echo "Apache could not be stopped." exit 1 else echo "Apache killed successfully." fi fi } INST_USER=$(id) INST_UID=$(expr "$INST_USER" : 'uid=$.$(.) gid=.') INST_USER=$(expr "$INST_USER" : 'uid=.($.$) gid=.*') if [ "$INST_UID" -ne 0 ]; then check_errs 1 "Only root user can switch web server!" fi if [ $# -ne 1 ] ; then echo "Illegal parameters = $# !" display_usage fi # set LSWSHOME cd "$(dirname "$0")" CURDIR=$(pwd) LSWSHOME=$(dirname "$(dirname "$CURDIR")") if [ "x$1" != "xapache" ] && [ "x$1" != "xlsws" ] ; then display_usage fi detect_control_panel if [ "$CP" = "WHM" ] \|\| [ "$CP" = "PSA" ] ; then switch_cp "$1" elif [ "$CP" = "DA" ] ; then switch_da "$1" elif [ "$CP" = "CWP" ] ; then switch_cwp "$1" fi	22.96 KB	2026-04-03 07:58
📄 cpanel_restart_httpd.in #!/bin/sh LS_PID="" LS_CONF=%LSWS_HOME%/conf/httpd_config.xml if [ "x$1" == "x--restart" ] \|\| [ "x$1" == "x" ]; then if [ -f '/tmp/lshttpd/lshttpd.pid' ]; then LSPID=`cat /tmp/lshttpd/lshttpd.pid` kill -0 $LSPID if [ $? -eq 0 ]; then touch /var/run/restartsrv_httpd.lock service lsws restart unlink /var/run/restartsrv_httpd.lock fi fi PORT_OFFSET_CONF=`grep apachePortOffset "$LS_CONF"` PORT_OFFSET=`expr "$PORT_OFFSET_CONF" : '.<apachePortOffset>$.$</apachePortOffset>'` if [ "x$PORT_OFFSET" != 'x' ] && [ "$PORT_OFFSET" -ne 0 ]; then /scripts/restartsrv_httpd_ls_bak $@ fi else /scripts/restartsrv_httpd_ls_bak $@ fi	732 B	2026-04-03 07:58
📄 create_admin_keypair.sh #!/bin/sh CUR_DIR=`dirname "$0"` cd $CUR_DIR CUR_DIR=`pwd` echo "Generating key pair for web console login page, please wait ..." openssl genrsa -out key.pem 512 if [ "$?" -eq "0" ] ; then ../fcgi-bin/admin_php5 -q genjCryptionKeyPair.php key.pem rm -f key.pem else ../fcgi-bin/admin_php5 -q genjCryptionKeyPair.php fi	336 B	2026-04-03 07:58
📄 enable_ruby_python_selector.sh #!/bin/bash RUBY_LSAPI_VER="5\\." WSGI_LSAPI_VER=2.1 alt_ruby_install() { # $1 = ruby version if [ "x$1" != "x" ] && [ -d /opt/alt/ruby$1/bin/ ]; then echo "Install ruby-lsapi rack gem for alt-ruby $1" yum install -y alt-ruby$1-rubygem-lsapi alt-ruby$1-rubygem-rack /opt/alt/ruby$1/bin/gem list ruby-lsapi \| grep $RUBY_LSAPI_VER >/dev/null if [ $? -ne 0 ]; then echo "Alt-ruby $1 misses ruby-lsapi 5.x gem, install latest version." /opt/alt/ruby$1/bin/gem install ruby-lsapi fi echo "" fi } plesk_ruby_install() { # $1 = ruby version # $2 = rack gem version if [ "x$1" != "x" ] && [ -d $1 ]; then echo "Install ruby-lsapi gem for Plesk ruby $1" $1/bin/gem install ruby-lsapi if [ "x$2" != "x" ]; then $1/bin/gem install rack -v=$2 else $1/bin/gem install rack -v=2.2.4 fi echo "" fi } alt_python_install() { # $1 = ruby version if [ "x$1" != "x" ] && [ -d /opt/alt/python$1/bin/ ]; then if [ -d /opt/alt/python$1 ]; then echo "Install wsgi-lsapi for python $1" yum install -y alt-python$1-wsgi-lsapi if [ ! -f /opt/alt/python$1/bin/lswsgi ]; then /opt/alt/python$1/bin/python3 configure.py yum install devtoolset-7-toolchain make 1>/dev/null 2>&1 cp lswsgi /opt/alt/python$1/bin/ make clean fi fi fi } for VER in '18' '19' '20' '21' '22' '23' '24' '25' '26' '27' '30' '31' '32' '33' do alt_ruby_install $VER done rm wsgi-lsapi-$WSGI_LSAPI_VER.tgz rm -rf wsgi-lsapi-$WSGI_LSAPI_VER wget http://www.litespeedtech.com/packages/lsapi/wsgi-lsapi-$WSGI_LSAPI_VER.tgz tar xvfz wsgi-lsapi-$WSGI_LSAPI_VER.tgz cd wsgi-lsapi-$WSGI_LSAPI_VER for VER in '27' '33' '34' '35' '36' '37' '38' '39' '310' '311' '312' '313' do alt_python_install $VER done if [ -d /opt/plesk/ruby ]; then yum install -y gcc gmp-devel cd /opt/plesk/ruby for VER in '1.9.3' '2.0.0' '2.1.10' do plesk_ruby_install $VER 1.6.4 done for VER in '2.2.10' '2.3.8' '2.4.10' '2.5.8' '2.6.6' '2.7.1' do plesk_ruby_install $VER done fi if [ -d /opt/cpanel/ea-ruby27/ ]; then echo "Install ruby-lsapi for ea-ruby27" scl enable ea-ruby27 'gem install ruby-lsapi' scl enable ea-ruby27 'gem install rack -v=2.2.4' if [ ! -f /usr/local/lsws/fcgi-bin/ea-ruby27 ]; then cat >/usr/local/lsws/fcgi-bin/ea-ruby27 <<EOF #!/bin/sh . /opt/cpanel/ea-ruby27/enable /opt/cpanel/ea-ruby27/root/usr/bin/ruby \$@ EOF chmod a+x /usr/local/lsws/fcgi-bin/ea-ruby27 fi fi	2.68 KB	2026-04-03 07:58
📄 fix_cagefs.sh #!/bin/sh # Pass in 1 as the first param to force remount cage fixCageFS() { if [ -f "/etc/cagefs/cagefs.mp" ] ; then # cagefs installed first, need update mount point FORCE_REMOUNT="${1}"; REMOUNT=0 LSWS_DIR="/usr/local/lsws" if ! grep -v 'deleted' < /proc/mounts \| grep -q 'lsws'; then REMOUNT=1 if ! grep -Eq "^${LSWS_DIR}$" "/etc/cagefs/cagefs.mp"; then # shellcheck disable=SC1003 sed -i -e '$a\' "/etc/cagefs/cagefs.mp" echo "${LSWS_DIR}" >> "/etc/cagefs/cagefs.mp" fi fi if [ "${FORCE_REMOUNT}" -eq 1 ] \|\| [ "${REMOUNT}" -eq 1 ]; then cagefsctl --remount-all fi fi } fixCageFS "${1:-0}"	766 B	2026-04-03 07:58
📄 fp_install.sh INST_USER=`id` INST_UID=`expr "$INST_USER" : 'uid=$.$(.) gid=.'` INST_USER=`expr "$INST_USER" : 'uid=.($.$) gid=.'` if [ $INST_UID != "0" ]; then cat <<EOF [ERROR] Only root user can install FrontPage server extension! EOF exit 1 fi if [ "x$1" = "x" ]; then echo "Usage: fp_install.sh <path_to_frontpage_package>" exit 2 fi CURDIR=`pwd` PKG_BASE=`dirname $1` cd $PKG_BASE PKG_BASE=`pwd` PATH_FP_PKG=$PKG_BASE/`basename $1` if [ ! -f $PATH_FP_PKG ]; then echo "[ERROR] File not found: $PATH_FP_PKG" exit 3 fi cd $CURDIR CURDIR=`dirname "$0"` cd $CURDIR CURDIR=`pwd` LSWSHOME=`dirname $CURDIR` LSWSHOME=`dirname $LSWSHOME` ENABLE_CHROOT=0 CHROOT_PATH="/" if [ -f "$LSWS_HOME/conf/httpd_config.xml" ]; then OLD_ENABLE_CHROOT_CONF=`grep "<enableChroot>" "$LSWS_HOME/conf/httpd_config.xml"` OLD_CHROOT_PATH_CONF=`grep "<chrootPath>" "$LSWS_HOME/conf/httpd_config.xml"` OLD_ENABLE_CHROOT=`expr "$OLD_ENABLE_CHROOT_CONF" : '.<enableChroot>$.$</enableChroot>.'` OLD_CHROOT_PATH=`expr "$OLD_CHROOT_PATH_CONF" : '[^<]<chrootPath>$[^<]$</chrootPath>.'` if [ "x$OLD_ENABLE_CHROOT" != "x" ]; then ENABLE_CHROOT=$OLD_ENABLE_CHROOT fi if [ "x$OLD_CHROOT_PATH" != "x" ]; then CHROOT_PATH=$OLD_CHROOT_PATH fi fi if [ $ENABLE_CHROOT -eq 0 ]; then CHROOT_PATH="" fi cd $CHROOT_PATH/usr/local tar xvfz $PATH_FP_PKG chmod a+rx frontpage frontpage/version5.0 cd frontpage/version5.0 chmod a+rx admin bin help nls admin/1033 bin/owsadm.exe help/1033 chmod -R a+rx exes chmod a-x exes/_vti_bin/images/* chmod a+r admin/1033/* bin/* help/1033/* nls/* if [ "x$CHROOT_PATH" != "x" ]; then ln -s $CHROOT_PATH/usr/local/frontpage /usr/local/frontpage fi	1.65 KB	2026-04-03 07:58
📄 gdb-bt bt full info registers	25 B	2026-04-03 07:58
📄 genjCryptionKeyPair.php <?php require_once('../html/classes/jCryption.php') ; /** * RSAKeyImport * * PHP versions 4 and 5 * * LICENSE: This source file is subject to version 3.0 of the PHP license * that is available through the world-wide-web at the following URI: * http://www.php.net/license/3_0.txt. If you did not receive a copy of * the PHP License and are unable to obtain it through the web, please * send a note to license@php.net so we can mail you a copy immediately. * * Many of the functions in this class are from the PEAR Crypt_RSA package ... * So most of the credits goes to the original creator of this package Alexander Valyalkin * you can get the package under http://pear.php.net/package/Crypt_RSA * * This is just a simplified extraction for the PEM key import functionality and requires bcmath. * * @author Lite Speed Technologies <info@litespeedtech.com> * @copyright 2009 Lite Speed Technologies * @license http://www.php.net/license/3_0.txt PHP License 3.0 * @version 1.0.0 */ class RSAKeyImport { public static function bin2int( $str ) { $result = '0' ; $n = strlen($str) ; do { $result = bcadd(bcmul($result, '256'), ord($str{ -- $n})) ; } while ( $n > 0 ) ; return $result ; } public static function fromPEMString( $str ) { // search for base64-encoded private key if ( ! preg_match('/-----BEGIN RSA PRIVATE KEY-----([^-]+)-----END RSA PRIVATE KEY-----/', $str, $matches) ) { echo ("can't find RSA private key in the string [{$str}]") ; return false ; } // parse private key. It is ASN.1-encoded $str = base64_decode($matches[1]) ; $pos = 0 ; $tmp = RSAKeyImport::_ASN1Parse($str, $pos) ; if ( $tmp == false ) return false ; if ( $tmp['tag'] != 0x10 ) { echo "Expected 0x10 (SEQUENCE) wrong ASN tag value: " . $tmp['tag'] ; return false ; } // parse ASN.1 SEQUENCE for RSA private key $attr_names = array( 'version', 'n', 'e', 'd', 'p', 'q', 'dmp1', 'dmq1', 'iqmp' ) ; $n = sizeof($attr_names) ; $rsa_attrs = array() ; for ( $i = 0 ; $i < $n ; $i ++ ) { $tmp = RSAKeyImport::_ASN1ParseInt($str, $pos) ; if ( $tmp === false ) { echo "fail to parse int" ; return false ; } $attr = $attr_names[$i] ; $rsa_attrs[$attr] = $tmp ; } return $rsa_attrs ; } public static function _ASN1Parse( $str, &$pos ) { $max_pos = strlen($str) ; if ( $max_pos < 2 ) { echo ("ASN.1 string too short") ; return false ; } // get ASN.1 tag value $tag = ord($str[$pos ++]) & 0x1f ; if ( $tag == 0x1f ) { $tag = 0 ; do { $n = ord($str[$pos ++]) ; $tag <<= 7 ; $tag \|= $n & 0x7f ; } while ( ($n & 0x80) && $pos < $max_pos ) ; } if ( $pos >= $max_pos ) { echo("ASN.1 string too short") ; return false ; } // get ASN.1 object length $len = ord($str[$pos ++]) ; if ( $len & 0x80 ) { $n = $len & 0x1f ; $len = 0 ; while ( $n -- && $pos < $max_pos ) { $len <<= 8 ; $len \|= ord($str[$pos ++]) ; } } if ( $pos >= $max_pos \|\| $len > $max_pos - $pos ) { echo ("ASN.1 string too short") ; return false ; } // get string value of ASN.1 object $str = substr($str, $pos, $len) ; return array( 'tag' => $tag, 'str' => $str, ) ; } public static function _ASN1ParseInt( $str, &$pos ) { $tmp = RSAKeyImport::_ASN1Parse($str, $pos) ; if ( $tmp == false ) { return false ; } if ( $tmp['tag'] != 0x02 ) { echo "Expected 0x02 (INTEGER) wrong ASN tag value: " . $tmp['tag'] ; return false ; } $pos += strlen($tmp['str']) ; return strrev($tmp['str']) ; } public static function dec2string( $decimal, $base ) { $string = null ; $base = (int) $base ; if ( $base < 2 \| $base > 36 \| $base == 10 ) { echo 'BASE must be in the range 2-9 or 11-36' ; exit ; } $charset = '0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ' ; $charset = substr($charset, 0, $base) ; do { $remainder = bcmod($decimal, $base) ; $char = substr($charset, $remainder, 1) ; $string = "$char$string" ; $decimal = bcdiv(bcsub($decimal, $remainder), $base) ; } while ( $decimal > 0 ) ; return strtolower($string) ; } public static function import_and_convert( $pem_filename ) { $str1 = file_get_contents($pem_filename) ; if ( $str1 == false ) { echo "failed to open file $pem_filename" ; return false ; } $attrs = RSAKeyImport::fromPEMString($str1) ; if ( $attrs == false ) { echo "failed to parse $pem_filename" ; return false ; } $n_int = RSAKeyImport::bin2int($attrs['n']) ; $d_int = RSAKeyImport::bin2int($attrs['d']) ; $e_int = RSAKeyImport::bin2int($attrs['e']) ; $e_hex = RSAKeyImport::dec2string($e_int, 16) ; $n_hex = RSAKeyImport::dec2string($n_int, 16) ; $mykeys = array( 'e_hex' => $e_hex, 'n_hex' => $n_hex, 'd_int' => $d_int, 'n_int' => $n_int ) ; return $mykeys ; } } ## main # openssl genrsa -out key.pem 512 $mykeys = NULL ; if ( isset($argv[1]) ) { $pemfile = $argv[1] ; $mykeys = RSAKeyImport::import_and_convert($pemfile) ; } if ( $mykeys == FALSE ) { echo "Using php to generate keys, please be patient ... \n" ; $keyLength = 512 ; $jCryption = new jCryption() ; $keys = $jCryption->generateKeypair($keyLength) ; $e_hex = $jCryption->dec2string($keys['e'], 16) ; $n_hex = $jCryption->dec2string($keys['n'], 16) ; $mykeys = array( 'e_hex' => $e_hex, 'n_hex' => $n_hex, 'd_int' => $keys['d'], 'n_int' => $keys['n'] ) ; } $keyfile = '../conf/jcryption_keypair' ; $serialized_str = serialize($mykeys) ; $result = file_put_contents($keyfile, $serialized_str) ; chmod($keyfile, 0600) ; if ( $result == TRUE ) exit(0) ; else exit(1) ; ?>	6.43 KB	2026-04-03 07:58
📄 gzipStatic.sh #!/bin/sh LEVEL=$1 FN=$2 FN_GZ="$FN.lsz" FN_GZL="$FN.lszl" FN_GZT="$FN.lszt" if [ -f $FN_GZL ] \|\| [ -f $FN_GZT ] \|\| [ -f $FN_GZ ]; then exit 0 fi touch $FN_GZL gzip -c -$LEVEL $FN > $FN_GZT if [ $? -eq 0 ]; then mv $FN_GZT $FN_GZ else rm $FN_GZT fi rm $FN_GZL exit 0	272 B	2026-04-03 07:58
📄 htpasswd.php <?php $raw = $_SERVER['argv'][1]; $encypt = password_hash($raw, PASSWORD_BCRYPT); echo "$encypt\n"; ?>	103 B	2026-04-03 07:58
📄 lscmctl #!/bin/sh # /****************************************** # LiteSpeed Cache Management Script # # @author Michael Alegre # @copyright (c) 2017-2023 LiteSpeed Technologies, Inc. # *******************************************/ VERSION='1.12.3' OS=$(uname -s) SCRIPT_DIR=$(cd "$(dirname "${0}")" && pwd) cd "${SCRIPT_DIR}" \|\| { echo "Unable to cd to script dir ${SCRIPT_DIR}"; exit 1; } LSWS_DIR=$(cd "${SCRIPT_DIR}/../.." && pwd) PHP_SCRIPT="${LSWS_DIR}/add-ons/webcachemgr/bootstrap_cli.php" SHARED_API_VERSION_FILE="${LSWS_DIR}/add-ons/webcachemgr/VERSION" SHARED_API_MIN_VER_FILE="${LSWS_DIR}/add-ons/webcachemgr/MIN_VER" YELLOW='\e[33m' CYAN='\e[36m' GREEN='\e[32m' L_GRAY='\e[37m' END_COLOR='\e[0m' printHeader() { # $1 title , $2 descr printf "\n${YELLOW}%s${END_COLOR}\n%s\n" "${1}" "${2}" } printLabelDesc() { printf "\n${YELLOW}%s${END_COLOR} %s\n\n" "${1}" "${2}" } printCmdOption() { printf "${CYAN}%s${END_COLOR} ${GREEN}%s${END_COLOR}\n" "${1}" "${2}" printf " %s\n\n" "${3}" \| fold -sw 80 } printExample() { printf " ${L_GRAY}%s:${END_COLOR}\n" "${1}" printf " ./lscmctl %s\n\n" "${2}" } printHelp() { printHeader "LiteSpeed Cache Manager CLI Tool v${VERSION}" printLabelDesc 'Usage:' './lscmctl [-php path/to/php] command [flag/parameter]' printLabelDesc 'Possible Commands:' # shellcheck disable=SC2016 printCmdOption 'setcacheroot' '[-svr <cache root>] [-vh <cache root>]' 'List/Set server and/or virtual host cache roots. This command will list the current server and virtual host cache roots when no additional input is given. Use -svr and -vh to set those cache roots. The '"'"'$'"'"' character is not allowed when setting virtual host cache root. Virtual host cache root values starting with a '"'"'/'"'"' will automatically have '"'"'/$vh_user'"'"' appended to the end (this format was chosen to maintain compatibility with CageFS).' printCmdOption 'setversion' '[{--list \| --latest \| <version>}]' 'List/Set active LSCWP version. This command will list the currently active version when no additional input is given. Use --list to show available versions or --latest to switch to the latest available version. A valid version number can also be provided to switch to that version specifically. This must be set before performing other lscmctl operations.' printCmdOption 'scan' '[-n] [-e]' 'Scan for all WordPress installations. This command will create an lscm.data file under the "lsws/admin/lscdata" directory. Add the -n flag to only discover new installations. By adding the -e flag, LSCWP will be enabled on all known installations after scanning is complete.' printCmdOption 'scannew' '[-en] ' 'Scan for WordPress installations not already discovered in a previous scan. This command will create an lscm.data file under the "lsws/admin/lscdata" directory. By adding the -en flag, LSCWP will be enabled only on newly discovered installations after scanning is complete. If you would rather enable LSCWP for all known installations, after scanning for previously undiscovered installations, please use command '"'"'scan -n -e'"'"' instead.' printCmdOption 'enable' '{-m \| <wp path>}' 'Enables LSCWP for all discovered WordPress installations with the -m parameter or a single installation by providing the path to the WordPress installation directory.' printCmdOption 'disable' '{-m \| <wp path>}' 'Disables LSCWP for all discovered WordPress installations with the -m parameter or a single installation by providing the path to the WordPress installation directory.' printCmdOption 'upgrade' '{-m \| <wp path>}' 'Upgrade LSCWP for all discovered WordPress installations to the current active version with the -m parameter or a single installation by providing the path to the WordPress installation directory.' printCmdOption 'flag' '<wp path>' 'Flag a single WordPress installation. Flagged installations will be skipped during mass operations.' printCmdOption 'unflag' '{-m \| <wp path>}' 'Unflag all discovered WordPress installations with the -m parameter or a single installation by providing the path to the WordPress installation directory. Flagged installations will be skipped during mass operations.' printCmdOption 'status' '<wp path>' 'Get the most up to date LSCWP status for the provided WordPress installation.' printCmdOption 'dashnotify' '{-m \| -wppath <wp path>} [-plugin <plugin slug>] {-msgfile <message file path> \| -msg <message>}' 'Notify all discovered WordPress installations with the provided message (plain text or HTML) using the Dash Notifier WordPress plugin with the -m parameter or a single installation by providing the path to the WordPress installation directory. A plugin slug can be included to have an install/activate button for that plugin added to the message as well. Installations containing a '"'"'.dash_notifier_bypass'"'"' file will not be notified.' printCmdOption 'dashnotifyremove' '{-m \| <wp path>}' 'Remove Dash Notifier plugin (and notification messages) from all discovered WordPress installations with the -m parameter or a single installation by providing the path to the WordPress installation directory.' printCmdOption 'cpanelplugin' '{--install \| --uninstall \| -autoinstall [{0 \| 1}] \| --fixconf}' '[cPanel/WHM Environment Only] Install or uninstall the LiteSpeed user-end plugin for cPanel for all cPanel accounts using the '"'"'--install'"'"' and '"'"'--uninstall'"'"' input flags. The plugin will appear as "LiteSpeed Web Cache Manager" under '"'"'Advanced'"'"' in the user'"'"'s cPanel dashboard. The '"'"'-autoinstall'"'"' input param can be used to check the current auto install status. When turned on, the cPanel plugin will be automatically installed when installing/updating the WHM plugin. Use '"'"'-autoinstall {0 \| 1}'"'"' to manually turn this off and on respectively. The '"'"'--fixConf'"'"' input param can be used to re-populate the cPanel plugin'"'"'s configuration file values in case of an issue.' printCmdOption 'addinstalls' '{-wpinstall <wp path> <docroot> <server name> <site url>} \| -wpinstallsfile <installs file path>}' 'Add a WordPress installation to existing scan data. This "custom" data will be stored in it'"'"'s own lscm.data.cust data file under the "lsws/admin/lscdata" directory. A single installation can be added using the -wpinstall parameter with space separated list of installation info in the required order (<wp path> <docroot> <server name> <site url>). Multiple installations can be added at once using the -wpinstallsfile parameter to provide the path to an installs file containing a newline separated list of installation info in the expected format.' printCmdOption '--update-lib' '' 'Update the lscmctl script and the required shared library to their latest versions only if the currently installed versions are no longer supported.' printCmdOption '--force-update-lib' '' 'Force update the lscmctl script and the required shared library to their latest versions. It is not recommended that this command be included in any cron jobs, use command '"'"'--update-lib'"'"' instead.' printHeader "Example Usage:" printExample 'List server and virtual host cache roots' 'setcacheroot' printExample 'Set virtual host cache root' 'setcacheroot -vh /path/to/ssd/lscache' printExample 'Display currently active LSCWP version' 'setversion' printExample 'Display selectable LSCWP versions' 'setversion --list' printExample 'Set active LSCWP version to latest available' 'setversion --latest' printExample 'Set active LSCWP version to v1.5' 'setversion 1.5' printExample 'Discover all installations' 'scan' printExample 'Discover new installations only, passing in path to PHP binary' '-php /path/to/php/ scannew' printExample 'Enable LSCWP on all discovered installations' 'enable -m' printExample 'Disable LSCWP for a single installation' 'disable /home/user/public_html/wp' printExample 'Get LSCWP status for a single installation' 'status /home/user/public_html/wp' printExample 'Send a simple dashboard message to a single discovered WordPress installation' 'dashnotify -wppath /path/to/wp/install -msg "Hello World!"' printExample 'Broadcast a dashboard message recommending the LiteSpeed Cache for WordPress plugin to all discovered WordPress installations' 'dashnotify -m -plugin litespeed-cache -msgfile /path/to/msg/file' printExample 'Remove dashboard notifications (and Dash Notifier plugin) from all discovered WordPress installations' 'dashnotifyremove -m' printExample '[cPanel/WHM Environment Only] Install the LiteSpeed user-end plugin for cPanel for all cPanel accounts' 'cpanelplugin --install' printExample '[cPanel/WHM Environment Only] Turn off auto install for the LiteSpeed user-end plugin for cPanel' 'cpanelplugin -autoinstall 0' printExample 'Add a single WordPress Installations to custom data file.' 'addinstalls -wpinstall /home/user/public_html/wp /home/user/public_html user.com user.com/wp' printExample 'Add multiple WordPress Installations to custom data file using an installs file.' 'addinstalls -wpinstallsfile /path/to/installs/file' } updateMinAPIVerFile() { MIN_VER=$(wget -q https://www.litespeed.sh/sub/shared/MIN_VER -O -) RET=$? if [ "${RET}" = "127" ] ; then errorExit "Required command 'wget' not found with exit code 127." elif [ "$RET" != "0" ] ; then errorExit "Failed to download latest MIN_VER file with wget exit status ${RET}." fi echo "${MIN_VER}" > "${SHARED_API_MIN_VER_FILE}" } apiNeedsUpdate() { UPDATE_MIN_VER=1 if [ -f "${SHARED_API_VERSION_FILE}" ] ; then test "$(find "${SHARED_API_VERSION_FILE}" -mmin -1440)" # shellcheck disable=SC2181 if [ "${?}" = "0" ] ; then UPDATE_MIN_VER=0 fi fi if [ ! -f "${SHARED_API_MIN_VER_FILE}" ] \|\| [ $UPDATE_MIN_VER ] ; then updateMinAPIVerFile fi CURR_VER=$(cat "${SHARED_API_VERSION_FILE}") MIN_VER=$(cat "${SHARED_API_MIN_VER_FILE}") CURR_MAJOR=$(echo "${CURR_VER}" \| awk -F"." '{print $1}') MIN_MAJOR=$(echo "${MIN_VER}" \| awk -F"." '{print $1}') if [ "${CURR_MAJOR}" -lt "${MIN_MAJOR}" ] ; then return 0 elif [ "${CURR_MAJOR}" -gt "${MIN_MAJOR}" ] ; then return 1 fi CURR_MINOR=$(echo "${CURR_VER}" \| awk -F"." '{print $2}') MIN_MINOR=$(echo "${MIN_VER}" \| awk -F"." '{print $2}') if [ "${CURR_MINOR}" -lt "${MIN_MINOR}" ] ; then return 0 elif [ "${CURR_MINOR}" -gt "${MIN_MINOR}" ] ; then return 1 fi CURR_IMPROVEMENT=$(echo "${CURR_VER}" \| awk -F"." '{print match($3, /[^ ]/) ? $3 : 0}') MIN_IMPROVEMENT=$(echo "${MIN_VER}" \| awk -F"." '{print match($3, /[^ ]/) ? $3 : 0}') if [ "${CURR_IMPROVEMENT}" -lt "${MIN_IMPROVEMENT}" ] ; then return 0 elif [ "${CURR_IMPROVEMENT}" -gt "${MIN_IMPROVEMENT}" ] ; then return 1 fi CURR_PATCH=$(echo "${CURR_VER}" \| awk -F"." '{print match($4, /[^ ]/) ? $4 : 0}') MIN_PATCH=$(echo "${MIN_VER}" \| awk -F"." '{print match($4, /[^ ]/) ? $4 : 0}') if [ "${CURR_PATCH}" -lt "${MIN_PATCH}" ] ; then return 0 elif [ "${CURR_PATCH}" -gt "${MIN_PATCH}" ] ; then return 1 fi return 1 } enforceMinAPIVer() { if apiNeedsUpdate ; then echo "Automatically updating lscmctl script and required shared library" runUpdate fi } runUpdate() { if [ "${1}" = "--update-lib" ] && ! apiNeedsUpdate ; then echo "Shared code library already meets minimum API version requirements." echo "Done!" return fi ADDONS_DIR=$(cd "${LSWS_DIR}/add-ons" && pwd) LOCAL_TAR_FILE="${ADDONS_DIR}/shared_latest.tar.gz" URL="https://shared.litespeed.sh/latest" echo "Downloading latest shared code tar file..." wget -q --tries=1 --no-check-certificate "${URL}" -O "${LOCAL_TAR_FILE}" RET=$? if [ "${RET}" != "0" ] ; then if [ -f "${LOCAL_TAR_FILE}" ] ; then /bin/rm -f "${LOCAL_TAR_FILE}" fi if [ "${RET}" = "127" ] ; then errorExit "Required command 'wget' not found with exit code 127." else errorExit "Failed to download latest shared code with wget exit status ${RET}." fi fi MD5_VALUE=$(wget -q https://shared.litespeed.sh/latest/md5 -O -) if [ "${MD5_VALUE}" = "" ] ; then /bin/rm -f "${LOCAL_TAR_FILE}" errorExit "Failed to wget latest shared code md5 value." fi if [ "x${OS}" = "xFreeBSD" ] ; then LOCAL_MD5_VAL=$(md5 "${LOCAL_TAR_FILE}" \| awk '{ print $4 }') else LOCAL_MD5_VAL=$(md5sum "${LOCAL_TAR_FILE}" \| awk '{ print $1 }') fi echo "Checking tar file md5..." if [ "${MD5_VALUE}" != "${LOCAL_MD5_VAL}" ] ; then /bin/rm -f "${LOCAL_TAR_FILE}" errorExit "Md5 mismatch for shared code! Aborting." fi SHARED_CODE_DIR="${ADDONS_DIR}/webcachemgr" if [ -d "${SHARED_CODE_DIR}" ] ; then echo "Removing existing shared code directory..." /bin/rm -rf "${SHARED_CODE_DIR}" fi echo "Extracting downloaded shared code..." tar -xzf "${LOCAL_TAR_FILE}" -C "${ADDONS_DIR}" RET=$? if [ "${RET}" != "0" ] ; then /bin/rm -f "${LOCAL_TAR_FILE}" errorExit "Failed to extract tar.gz file with tar exit status ${RET}." fi echo "Removing local shared code tar file..." /bin/rm -f "${LOCAL_TAR_FILE}" echo "Updating lscmctl script..." /bin/mv -f "${ADDONS_DIR}/lscmctl" "${ADDONS_DIR}/../admin/misc/lscmctl" echo "Done!" } errorExit() { printf "${YELLOW}ERROR:${END_COLOR} %s\n\n" "${1}" >&2 exit 1 } setPanelClassName() { PANEL_CLASS_NAME='' x=$(/usr/local/cpanel/cpanel -V 2>/dev/null) if [ "${x}" ]; then PANEL_CLASS_NAME='\Lsc\Wp\Panel\CPanel' return fi x=$(/usr/sbin/plesk version 2>/dev/null) if [ "${x}" ]; then PANEL_CLASS_NAME='\Lsc\Wp\Panel\Plesk' return fi x=$(/usr/local/directadmin/directadmin v 2>/dev/null) if [ "${x}" ]; then PANEL_CLASS_NAME='\Lsc\Wp\Panel\DirectAdmin' return fi if [ -e "${LSWS_DIR}/admin/lscdata/custom" ]; then PANEL_CLASS_NAME='custom' return fi } selectPHP() { if [ "${1}" = "-php" ] then if [ -x "${2}" ] ; then PHP_BIN="${2} -d disable_functions=" return 2 else errorExit "${2} not detected as a valid php binary." fi else #Use default admin php binary DEFAULT_PHP_BIN="${LSWS_DIR}/admin/fcgi-bin/admin_php5" OLS_DA_PHP_BIN="${LSWS_DIR}/admin/fcgi-bin/admin_php" if [ ! -x "${DEFAULT_PHP_BIN}" ] ; then if [ -x "${OLS_DA_PHP_BIN}" ] ; then DEFAULT_PHP_BIN="${OLS_DA_PHP_BIN}" else errorExit "Could not find default admin PHP binary." fi fi PHP_BIN="${DEFAULT_PHP_BIN} -c ${LSWS_DIR}/add-ons/webcachemgr/shared/webcachemgr.ini" fi } if [ "${1}" = "--help" ] then printHelp exit 0 fi if [ "${1}" = "--update-lib" ] \|\| [ "${1}" = "--force-update-lib" ] then runUpdate "${1}" exit 0; fi enforceMinAPIVer setPanelClassName if [ "${PANEL_CLASS_NAME}" = '' ] ; then errorExit 'Supported Control Panel not detected. Aborting!' fi selectPHP "${1}" "${2}" if [ $? = 2 ] ; then shift 2 fi if [ $# = 0 ] ; then errorExit "Missing input command. Try --help for a full list of available commands with examples." fi $PHP_BIN "${PHP_SCRIPT}" "${PANEL_CLASS_NAME}" "${@}"	15.3 KB	2026-03-12 22:37
📄 lshttpd.service # should be added as /usr/lib/systemd/system/lshttpd.service [Unit] Description=LiteSpeed HTTP Server After=network-online.target remote-fs.target nss-lookup.target lve_namespaces.service Wants=network-online.target [Service] Type=forking PIDFile=/var/run/lshttpd.pid ExecStart=/usr/local/lsws/bin/lswsctrl start ExecReload=/usr/local/lsws/bin/lswsctrl reload ExecStop=/usr/local/lsws/bin/lswsctrl delay-stop KillMode=none PrivateTmp=false #Restart=on-failure #RestartSec=5 # do not want to be limited in anyway CPUAccounting=false TasksAccounting=false MemoryAccounting=false OOMScoreAdjust=-500 [Install] WantedBy=multi-user.target # Alias=lsws.service	660 B	2026-04-03 07:58
📄 lsup.sh CURDIR=`dirname "$0"` cd $CURDIR CURDIR=`pwd` LSWSHOME=`dirname $CURDIR` LSWSHOME=`dirname $LSWSHOME` display_usage() { cat <<EOF Usage: lsup.sh [-s] [-f] [-v VERSION] [-b BUILD_NUMBER] -f Force reinstall. If -f is not given and same version already installed, this upgrade command is aborted. With -f option, latest build will be downloaded and installed even within same release version. -v VERSION If VERSION is given, this command will try to install specified VERSION. Otherwise, it will get the latest version from $LSWSHOME/autoupdate/release. -b BUILD_NUMBER Explicitily set the build number, it can be used to downgrade to an older build. -s Comunicate with server using HTTPS instead of HTTP. -w Do not run wswatch.sh --help display this help and exit EOF exit 1 } FORCED=N VERSION=x BUILD= DEBUG=0 HTTPS=s NO_WSWATCH=0 while [ "x$1" != "x" ] do if [ "x$1" = "x-d" ] ; then DEBUG=1 elif [ "x$1" = "x-f" ] ; then FORCED=Y elif [ "x$1" = "x-s" ] ; then HTTPS=s elif [ "x$1" = "x-w" ] ; then NO_WSWATCH=1 elif [ "x$1" = "--help" ] ; then display_usage elif [ "x$1" = "x-v" ] ; then shift VERSION=$1 if [ "x$VERSION" = "x" ] ; then display_usage fi elif [ "x$1" = "x-b" ] ; then shift BUILD="$1" if [ "x$BUILD" = "x" ] ; then display_usage fi else display_usage fi shift; done # detect download method OS=`uname -s` DLCMD=x if [ "x$OS" = "xFreeBSD" ] ; then DL=`which fetch` if [ $? -eq 0 ] ; then DLCMD="$DL -o" fi fi if [ "$DLCMD" = "x" ] ; then DL=`which wget` if [ $? -eq 0 ] ; then DLCMD="$DL -nv -O" fi fi if [ "$DLCMD" = "x" ] ; then DL=`which curl` if [ $? -eq 0 ] ; then DLCMD="$DL -L -o" fi fi if [ "$DLCMD" = "x" ] ; then echo "[ERROR] Fail to detect proper download method" exit 1 fi CURVERSION=`cat $LSWSHOME/VERSION` CURBUILD=`cat $LSWSHOME/BUILD.$CURVERSION` echo "Installed '$CURVERSION build $CURBUILD'" # check stable release LATEST_URL="http$HTTPS://update.litespeedtech.com/ws/latest.php" $DLCMD "$LSWSHOME/autoupdate/latest" $LATEST_URL LSWS_STABLE_LINE=`cat "$LSWSHOME/autoupdate/latest" \| grep LSWS_STABLE` LSWS_STABLE_VER=`expr "$LSWS_STABLE_LINE" : '.LSWS_STABLE=$.$ BUILD .'` LSWS_STABLE_BUILD=`expr "$LSWS_STABLE_LINE" : '.LSWS_STABLE=.* BUILD $.$'` if [ "x$CURVERSION" = "x$LSWS_STABLE_VER" ] && [ "x$CURBUILD" = "x$LSWS_STABLE_BUILD" ]; then touch "$LSWSHOME/autoupdate/follow_stable" fi if [ $VERSION = "x" ] && [ "$FORCED" = "N" ] ; then if [ "x$CURVERSION" = "x$LSWS_STABLE_VER" ] && [ "x$CURBUILD" = "x$LSWS_STABLE_BUILD" ]; then echo "Latest STABLE release has been installed. No update." exit 0 fi if [ -f "$LSWSHOME/autoupdate/follow_stable" ]; then VERSION=$LSWS_STABLE_VER BUILD=$LSWS_STABLE_BUILD echo "Follow STABLE release '$LSWS_STABLE_VER build $LSWS_STABLE_BUILD'" else echo "Was not following STABLE releases, abort." echo "To start following STABLE release, run" echo " lsup.sh -f -v $LSWS_STABLE_VER -b $LSWS_STABLE_BUILD" exit 2 fi fi # check latest release $LSWSHOME/bin/lshttpd -U if [ ! -f "$LSWSHOME/autoupdate/release" ] ; then echo "[ERROR] Fail to locate file $LSWSHOME/autoupdate/release" exit 1 fi if [ ! -f "$LSWSHOME/autoupdate/platform" ] ; then echo "[ERROR] Fail to locate file $LSWSHOME/autoupdate/platform" exit 1 fi RELEASE=`cat $LSWSHOME/autoupdate/release` PLATFORM=`cat $LSWSHOME/autoupdate/platform` EDITION=`expr $RELEASE : '.-$.$'` if [ $VERSION = "x" ] ; then VERSION=`expr $RELEASE : '$.$-'` else RELEASE="$VERSION-$EDITION" fi FILENAME="lsws-$RELEASE-$PLATFORM.tar.gz" if [ -e "$LSWSHOME/autoupdate/$FILENAME" ] ; then /bin/rm -f "$LSWSHOME/autoupdate/$FILENAME" fi MAJOR_VERSION=`expr $VERSION : '$[0-9]$\..'` if [ $DEBUG = '1' ]; then DOWNLOAD_URL="http$HTTPS://www.litespeedtech.com/packages/dbg/lsws-$RELEASE-$PLATFORM-dbg.tar.gz" else DOWNLOAD_URL="http$HTTPS://www.litespeedtech.com/packages/$MAJOR_VERSION.0/$FILENAME" if [ "x$BUILD" = 'x' ]; then echo "Query latest build of $FILENAME" BUILD_URL=$DOWNLOAD_URL.lastbuild $DLCMD "$LSWSHOME/autoupdate/build" $BUILD_URL BUILD=`cat "$LSWSHOME/autoupdate/build"` fi if [ "x$BUILD" != 'x' ]; then if [ "$VERSION" = "$CURVERSION" ] && [ "x$CURBUILD" = "x$BUILD" ] && [ "$FORCED" = "N" ] ; then echo "Package $VERSION BUILD $CURBUILD already installed. If need to do force reinstall, please use option -f" exit 1 fi echo "Download Build [$BUILD]." fi DOWNLOAD_URL="$DOWNLOAD_URL.$BUILD" fi echo "$DLCMD $LSWSHOME/autoupdate/$FILENAME $DOWNLOAD_URL" $DLCMD "$LSWSHOME/autoupdate/$FILENAME" $DOWNLOAD_URL if [ $? != 0 ]; then echo "[ERROR] Failed to download $DOWNLOAD_URL" exit 2 fi if [ "x$VERSION" = "x$LSWS_STABLE_VER" ] && [ "x$BUILD" = "x$LSWS_STABLE_BUILD" ]; then if [ ! -f "$LSWSHOME/autoupdate/follow_stable" ]; then echo "Start to follow STABLE releases." touch "$LSWSHOME/autoupdate/follow_stable" fi elif [ -f "$LSWSHOME/autoupdate/follow_stable" ]; then echo "Diverted from STABLE releases." rm "$LSWSHOME/autoupdate/follow_stable" fi echo "$LSWSHOME/admin/misc/update.sh $VERSION $EDITION $PLATFORM" $LSWSHOME/admin/misc/update.sh $VERSION $EDITION $PLATFORM if [ $? != 0 ]; then echo "[ERROR] Failed to update to '$CURVERSION build $CURBUILD'" exit 3 fi echo "Restarting LSWS" $LSWSHOME/bin/lswsctrl fullrestart echo "Done"	5.65 KB	2026-04-03 07:58
📄 lsup5v3.sh CURDIR=`dirname "$0"` cd $CURDIR CURDIR=`pwd` LSWSHOME=`dirname $CURDIR` LSWSHOME=`dirname $LSWSHOME` display_usage() { cat <<EOF Usage: lsup.sh [-s] [-f] [-v VERSION] [-b BUILD_NUMBER] -f Force reinstall. If -f is not given and same version already installed, this upgrade command is aborted. With -f option, latest build will be downloaded and installed even within same release version. -v VERSION If VERSION is given, this command will try to install specified VERSION. Otherwise, it will get the latest version from $LSWSHOME/autoupdate/release. -b BUILD_NUMBER Explicitily set the build number, it can be used to downgrade to an older build. -s Comunicate with server using HTTPS instead of HTTP. -w Do not run wswatch.sh --help display this help and exit EOF exit 1 } FORCED=N VERSION=x BUILD= DEBUG=0 HTTPS=s NO_WSWATCH=0 while [ "x$1" != "x" ] do if [ "x$1" = "x-d" ] ; then DEBUG=1 elif [ "x$1" = "x-f" ] ; then FORCED=Y elif [ "x$1" = "x-s" ] ; then HTTPS=s elif [ "x$1" = "x-w" ] ; then NO_WSWATCH=1 elif [ "x$1" = "--help" ] ; then display_usage elif [ "x$1" = "x-v" ] ; then shift VERSION=$1 if [ "x$VERSION" = "x" ] ; then display_usage fi elif [ "x$1" = "x-b" ] ; then shift BUILD="$1" if [ "x$BUILD" = "x" ] ; then display_usage fi else display_usage fi shift; done # detect download method OS=`uname -s` DLCMD=x if [ "x$OS" = "xFreeBSD" ] ; then DL=`which fetch` if [ $? -eq 0 ] ; then DLCMD="$DL -o" fi fi if [ "$DLCMD" = "x" ] ; then DL=`which wget` if [ $? -eq 0 ] ; then DLCMD="$DL -nv -O" fi fi if [ "$DLCMD" = "x" ] ; then DL=`which curl` if [ $? -eq 0 ] ; then DLCMD="$DL -L -o" fi fi if [ "$DLCMD" = "x" ] ; then echo "[ERROR] Fail to detect proper download method" exit 1 fi CURVERSION=`cat $LSWSHOME/VERSION` CURBUILD=`cat $LSWSHOME/BUILD.$CURVERSION` echo "Installed '$CURVERSION build $CURBUILD'" # check stable release LATEST_URL="http$HTTPS://update.litespeedtech.com/ws/latest.php" $DLCMD "$LSWSHOME/autoupdate/latest" $LATEST_URL LSWS_STABLE_LINE=`cat "$LSWSHOME/autoupdate/latest" \| grep LSWS_STABLE` LSWS_STABLE_VER=`expr "$LSWS_STABLE_LINE" : '.LSWS_STABLE=$.$ BUILD .'` LSWS_STABLE_BUILD=`expr "$LSWS_STABLE_LINE" : '.LSWS_STABLE=.* BUILD $.$'` if [ "x$CURVERSION" = "x$LSWS_STABLE_VER" ] && [ "x$CURBUILD" = "x$LSWS_STABLE_BUILD" ]; then touch "$LSWSHOME/autoupdate/follow_stable" fi if [ $VERSION = "x" ] && [ "$FORCED" = "N" ] ; then if [ "x$CURVERSION" = "x$LSWS_STABLE_VER" ] && [ "x$CURBUILD" = "x$LSWS_STABLE_BUILD" ]; then echo "Latest STABLE release has been installed. No update." exit 0 fi if [ -f "$LSWSHOME/autoupdate/follow_stable" ]; then VERSION=$LSWS_STABLE_VER BUILD=$LSWS_STABLE_BUILD echo "Follow STABLE release '$LSWS_STABLE_VER build $LSWS_STABLE_BUILD'" else echo "Was not following STABLE releases, abort." echo "To start following STABLE release, run" echo " lsup.sh -f -v $LSWS_STABLE_VER -b $LSWS_STABLE_BUILD" exit 2 fi fi # check latest release $LSWSHOME/bin/lshttpd -U if [ ! -f "$LSWSHOME/autoupdate/release" ] ; then echo "[ERROR] Fail to locate file $LSWSHOME/autoupdate/release" exit 1 fi if [ ! -f "$LSWSHOME/autoupdate/platform" ] ; then echo "[ERROR] Fail to locate file $LSWSHOME/autoupdate/platform" exit 1 fi RELEASE=`cat $LSWSHOME/autoupdate/release` PLATFORM=`cat $LSWSHOME/autoupdate/platform` EDITION=`expr $RELEASE : '.-$.$'` if [ $VERSION = "x" ] ; then VERSION=`expr $RELEASE : '$.$-'` else RELEASE="$VERSION-$EDITION" fi FILENAME="lsws-$RELEASE-$PLATFORM.tar.gz" if [ -e "$LSWSHOME/autoupdate/$FILENAME" ] ; then /bin/rm -f "$LSWSHOME/autoupdate/$FILENAME" fi MAJOR_VERSION=`expr $VERSION : '$[0-9]$\..'` if [ $DEBUG = '1' ]; then DOWNLOAD_URL="http$HTTPS://www.litespeedtech.com/packages/dbg/lsws-$RELEASE-$PLATFORM-dbg.tar.gz" else DOWNLOAD_URL="http$HTTPS://www.litespeedtech.com/packages/$MAJOR_VERSION.0/$FILENAME" if [ "x$BUILD" = 'x' ]; then echo "Query latest build of $FILENAME" BUILD_URL=$DOWNLOAD_URL.lastbuild $DLCMD "$LSWSHOME/autoupdate/build" $BUILD_URL BUILD=`cat "$LSWSHOME/autoupdate/build"` fi if [ "x$BUILD" != 'x' ]; then if [ "$VERSION" = "$CURVERSION" ] && [ "x$CURBUILD" = "x$BUILD" ] && [ "$FORCED" = "N" ] ; then echo "Package $VERSION BUILD $CURBUILD already installed. If need to do force reinstall, please use option -f" exit 1 fi echo "Download Build [$BUILD]." fi DOWNLOAD_URL="$DOWNLOAD_URL.$BUILD" fi echo "$DLCMD $LSWSHOME/autoupdate/$FILENAME $DOWNLOAD_URL" $DLCMD "$LSWSHOME/autoupdate/$FILENAME" $DOWNLOAD_URL if [ $? != 0 ]; then echo "[ERROR] Failed to download $DOWNLOAD_URL" exit 2 fi if [ "x$VERSION" = "x$LSWS_STABLE_VER" ] && [ "x$BUILD" = "x$LSWS_STABLE_BUILD" ]; then if [ ! -f "$LSWSHOME/autoupdate/follow_stable" ]; then echo "Start to follow STABLE releases." touch "$LSWSHOME/autoupdate/follow_stable" fi elif [ -f "$LSWSHOME/autoupdate/follow_stable" ]; then echo "Diverted from STABLE releases." rm "$LSWSHOME/autoupdate/follow_stable" fi echo "$LSWSHOME/admin/misc/update.sh $VERSION $EDITION $PLATFORM" $LSWSHOME/admin/misc/update.sh $VERSION $EDITION $PLATFORM echo "Restarting LSWS" if [ $NO_WSWATCH = 1 ]; then $LSWSHOME/bin/lswsctrl fullrestart else $LSWSHOME/bin/lswsctrl fullrestart fi echo "Done"	5.63 KB	2021-12-15 13:42
📄 lsup6.sh CURDIR=`dirname "$0"` cd $CURDIR CURDIR=`pwd` LSWSHOME=`dirname $CURDIR` LSWSHOME=`dirname $LSWSHOME` display_usage() { cat <<EOF Usage: lsup.sh [-s] [-f] [-v VERSION] [-b BUILD_NUMBER] -f Force reinstall. If -f is not given and same version already installed, this upgrade command is aborted. With -f option, latest build will be downloaded and installed even within same release version. -v VERSION If VERSION is given, this command will try to install specified VERSION. Otherwise, it will get the latest version from $LSWSHOME/autoupdate/release. -b BUILD_NUMBER Explicitily set the build number, it can be used to downgrade to an older build. -s Comunicate with server using HTTPS instead of HTTP. -w Do not run wswatch.sh --help display this help and exit EOF exit 1 } FORCED=N VERSION=x BUILD= DEBUG=0 HTTPS=s NO_WSWATCH=0 while [ "x$1" != "x" ] do if [ "x$1" = "x-d" ] ; then DEBUG=1 elif [ "x$1" = "x-f" ] ; then FORCED=Y elif [ "x$1" = "x-s" ] ; then HTTPS=s elif [ "x$1" = "x-w" ] ; then NO_WSWATCH=1 elif [ "x$1" = "--help" ] ; then display_usage elif [ "x$1" = "x-v" ] ; then shift VERSION=$1 if [ "x$VERSION" = "x" ] ; then display_usage fi elif [ "x$1" = "x-b" ] ; then shift BUILD="$1" if [ "x$BUILD" = "x" ] ; then display_usage fi else display_usage fi shift; done # detect download method OS=`uname -s` DLCMD=x if [ "x$OS" = "xFreeBSD" ] ; then DL=`which fetch` if [ $? -eq 0 ] ; then DLCMD="$DL -o" fi fi if [ "$DLCMD" = "x" ] ; then DL=`which wget` if [ $? -eq 0 ] ; then DLCMD="$DL -nv -O" fi fi if [ "$DLCMD" = "x" ] ; then DL=`which curl` if [ $? -eq 0 ] ; then DLCMD="$DL -L -o" fi fi if [ "$DLCMD" = "x" ] ; then echo "[ERROR] Fail to detect proper download method" exit 1 fi CURVERSION=`cat $LSWSHOME/VERSION` CURBUILD=`cat $LSWSHOME/BUILD.$CURVERSION` echo "Installed '$CURVERSION build $CURBUILD'" # check stable release LATEST_URL="http$HTTPS://update.litespeedtech.com/ws/latest.php" $DLCMD "$LSWSHOME/autoupdate/latest" $LATEST_URL LSWS_STABLE_LINE=`cat "$LSWSHOME/autoupdate/latest" \| grep LSWS_STABLE` LSWS_STABLE_VER=`expr "$LSWS_STABLE_LINE" : '.LSWS_STABLE=$.$ BUILD .'` LSWS_STABLE_BUILD=`expr "$LSWS_STABLE_LINE" : '.LSWS_STABLE=.* BUILD $.$'` if [ "x$CURVERSION" = "x$LSWS_STABLE_VER" ] && [ "x$CURBUILD" = "x$LSWS_STABLE_BUILD" ]; then touch "$LSWSHOME/autoupdate/follow_stable" fi if [ $VERSION = "x" ] && [ "$FORCED" = "N" ] ; then if [ "x$CURVERSION" = "x$LSWS_STABLE_VER" ] && [ "x$CURBUILD" = "x$LSWS_STABLE_BUILD" ]; then echo "Latest STABLE release has been installed. No update." exit 0 fi if [ -f "$LSWSHOME/autoupdate/follow_stable" ]; then VERSION=$LSWS_STABLE_VER BUILD=$LSWS_STABLE_BUILD echo "Follow STABLE release '$LSWS_STABLE_VER build $LSWS_STABLE_BUILD'" else echo "Was not following STABLE releases, abort." echo "To start following STABLE release, run" echo " lsup.sh -f -v $LSWS_STABLE_VER -b $LSWS_STABLE_BUILD" exit 2 fi fi # check latest release $LSWSHOME/bin/lshttpd -U if [ ! -f "$LSWSHOME/autoupdate/release" ] ; then echo "[ERROR] Fail to locate file $LSWSHOME/autoupdate/release" exit 1 fi if [ ! -f "$LSWSHOME/autoupdate/platform" ] ; then echo "[ERROR] Fail to locate file $LSWSHOME/autoupdate/platform" exit 1 fi RELEASE=`cat $LSWSHOME/autoupdate/release` PLATFORM=`cat $LSWSHOME/autoupdate/platform` EDITION=`expr $RELEASE : '.-$.$'` if [ $VERSION = "x" ] ; then VERSION=`expr $RELEASE : '$.$-'` else RELEASE="$VERSION-$EDITION" fi FILENAME="lsws-$RELEASE-$PLATFORM.tar.gz" if [ -e "$LSWSHOME/autoupdate/$FILENAME" ] ; then /bin/rm -f "$LSWSHOME/autoupdate/$FILENAME" fi MAJOR_VERSION=`expr $VERSION : '$[0-9]$\..'` if [ $DEBUG = '1' ]; then DOWNLOAD_URL="http$HTTPS://www.litespeedtech.com/packages/dbg/lsws-$RELEASE-$PLATFORM-dbg.tar.gz" else DOWNLOAD_URL="http$HTTPS://www.litespeedtech.com/packages/$MAJOR_VERSION.0/$FILENAME" if [ "x$BUILD" = 'x' ]; then echo "Query latest build of $FILENAME" BUILD_URL=$DOWNLOAD_URL.lastbuild $DLCMD "$LSWSHOME/autoupdate/build" $BUILD_URL BUILD=`cat "$LSWSHOME/autoupdate/build"` fi if [ "x$BUILD" != 'x' ]; then if [ "$VERSION" = "$CURVERSION" ] && [ "x$CURBUILD" = "x$BUILD" ] && [ "$FORCED" = "N" ] ; then echo "Package $VERSION BUILD $CURBUILD already installed. If need to do force reinstall, please use option -f" exit 1 fi echo "Download Build [$BUILD]." fi DOWNLOAD_URL="$DOWNLOAD_URL.$BUILD" fi echo "$DLCMD $LSWSHOME/autoupdate/$FILENAME $DOWNLOAD_URL" $DLCMD "$LSWSHOME/autoupdate/$FILENAME" $DOWNLOAD_URL if [ $? != 0 ]; then echo "[ERROR] Failed to download $DOWNLOAD_URL" exit 2 fi if [ "x$VERSION" = "x$LSWS_STABLE_VER" ] && [ "x$BUILD" = "x$LSWS_STABLE_BUILD" ]; then if [ ! -f "$LSWSHOME/autoupdate/follow_stable" ]; then echo "Start to follow STABLE releases." touch "$LSWSHOME/autoupdate/follow_stable" fi elif [ -f "$LSWSHOME/autoupdate/follow_stable" ]; then echo "Diverted from STABLE releases." rm "$LSWSHOME/autoupdate/follow_stable" fi echo "$LSWSHOME/admin/misc/update.sh $VERSION $EDITION $PLATFORM" $LSWSHOME/admin/misc/update.sh $VERSION $EDITION $PLATFORM if [ $? != 0 ]; then echo "[ERROR] Failed to update to '$CURVERSION build $CURBUILD'" exit 3 fi echo "Restarting LSWS" $LSWSHOME/bin/lswsctrl fullrestart echo "Done"	5.65 KB	2026-04-03 07:58
📄 lsws.rc #!/bin/sh ### BEGIN INIT INFO # Provides: lsws # Required-Start: $local_fs $remote_fs $network # Required-Stop: $local_fs $remote_fs $network # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: lshttpd # Description: LiteSpeed Web Server is a World Wide Web server. ### END INIT INFO # # Startup script for the LiteSpeed Web Server # # chkconfig: - 85 15 # description: LiteSpeed Web Server is a World Wide Web server. # processname: lshttpd LSWS_CTRL="/usr/local/lsws/bin/lswsctrl" ret=0 case "$1" in faststart\|start) "$LSWS_CTRL" start 2>/dev/null 1>&2 ret=$? if [ "x`uname -s`" = "xFreeBSD" ]; then if [ $ret -eq 0 ]; then echo -n " lsws" fi fi ;; stop) "$LSWS_CTRL" stop 2>/dev/null 1>&2 ret=$? if [ "x`uname -s`" = "xFreeBSD" ]; then if [ $ret -eq 0 ]; then echo -n " lsws" fi fi ;; restart) "$LSWS_CTRL" restart 2>/dev/null 1>&2 ret=$? ;; reload\|graceful) "$LSWS_CTRL" reload 2>/dev/null 1>&2 ret=$? ;; condrestart\|try-restart) "$LSWS_CTRL" condrestart 2>/dev/null 1>&2 ret=$? ;; status) "$LSWS_CTRL" status ret=$? ;; *) echo "Usage: $PROG {start\|stop\|restart\|reload\|condrestart\|try-restart\|status\|help}" cat <<EOF start - start web server stop - stop web server restart - gracefully restart web server with zero down time reload - same as restart condrestart - gracefully restart web server if server is running try-restart - same as condrestart status - show service status help - this screen EOF ret=2 ;; esac exit $ret	1.78 KB	2026-04-03 07:58
📄 lsws.rc.gentoo #!/sbin/runscript depend() { need net use mysql dns netmount postgres after sshd } start() { ebegin "Starting LiteSpeed Web Server" "/usr/local/lsws/bin/lswsctrl" start 2>/dev/null 1>&2 eend $? } stop() { ebegin "Stopping LiteSped Web Server" "/usr/local/lsws/bin/lswsctrl" stop 2>/dev/null 1>&2 eend $? } restart() { ebegin "Restarting LiteSpeed Web Server" "/usr/local/lsws/bin/lswsctrl" restart 2>/dev/null 1>&2 eend $? }	441 B	2026-04-03 07:58
📄 mgr_ver.sh removeit() { FILEPATH=$LSWSHOME/$LSFILE.$NEWVER if [ -f $FILEPATH ] \|\| [ -d $FILEPATH ]; then echo "Removing $FILEPATH" rm -rf $FILEPATH else if [ $LSFILE != "modules" ]; then echo "$FILEPATH does not exist." fi fi } testit() { FILEPATH=$LSWSHOME/$LSFILE.$NEWVER if [ ! -f $FILEPATH ] && [ ! -d $FILEPATH ] && [ $LSFILE != "modules" ] && [ $LSFILE != "BUILD" ]; then echo "[ERROR] $FILEPATH does not exist, please run installer again." exit 3 fi } switchit() { FILEPATH=$LSWSHOME/$LSFILE if [ $LSFILE != "modules" ] \|\| [ -d $FILEPATH.$NEWVER ]; then rm -f $FILEPATH FILENAME=`basename $FILEPATH` ln -sf "./$FILENAME.$NEWVER" "$FILEPATH" fi } CURDIR=`dirname "$0"` cd $CURDIR CURDIR=`pwd` LSWSHOME=`dirname $CURDIR` LSWSHOME=`dirname $LSWSHOME` if [ "x-d" = "x$1" ]; then ACTION="del" shift fi if [ "x$1" = "x" ]; then cat <<EOF Usage: mgr_ver.sh [-d] VERSION Switch to another version of LiteSpeed web server, or remove files installed. Option: -d Delete files installed for the version specified EOF exit 1 else NEWVER=$1 fi FILES="bin/lshttpd bin/lscgid bin/lswsctrl admin/html modules BUILD" OLDVER=`cat $LSWSHOME/VERSION` if [ "x$ACTION" = "xdel" ]; then if [ "x$OLDVER" = "x" ]; then echo "[ERROR] Can not find $LSWSHOME/VERSION, Please run" echo "mgr_ver.sh without '-d' option first to confirm the version to be used." exit 1 elif [ "x$OLDVER" = "x$NEWVER" ]; then echo "[ERROR] Version: $NEWVER is in used, please switch to another verion first." exit 1 else for LSFILE in $FILES do removeit done exit 2 fi fi for LSFILE in $FILES do testit done for LSFILE in $FILES do switchit done ln -sf "./lscgid.$NEWVER" "$LSWSHOME/bin/httpd" echo "$NEWVER" > $LSWSHOME/VERSION exit 0	1.93 KB	2026-04-03 07:58
📄 php.ini [PHP] ;;;;;;;;;;;;;;;;;;; ; About this file ; ;;;;;;;;;;;;;;;;;;; ; ; This is the recommended, PHP 4-style version of the php.ini-dist file. It ; sets some non standard settings, that make PHP more efficient, more secure, ; and encourage cleaner coding. ; The price is that with these settings, PHP may be incompatible with some ; applications, and sometimes, more difficult to develop with. Using this ; file is warmly recommended for production sites. As all of the changes from ; the standard settings are thoroughly documented, you can go over each one, ; and decide whether you want to use it or not. ; ; For general information about the php.ini file, please consult the php.ini-dist ; file, included in your PHP distribution. ; ; This file is different from the php.ini-dist file in the fact that it features ; different values for several directives, in order to improve performance, while ; possibly breaking compatibility with the standard out-of-the-box behavior of ; PHP 3. Please make sure you read what's different, and modify your scripts ; accordingly, if you decide to use this file instead. ; ; - register_globals = Off [Security, Performance] ; Global variables are no longer registered for input data (POST, GET, cookies, ; environment and other server variables). Instead of using $foo, you must use ; you can use $_REQUEST["foo"] (includes any variable that arrives through the ; request, namely, POST, GET and cookie variables), or use one of the specific ; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending ; on where the input originates. Also, you can look at the ; import_request_variables() function. ; Note that register_globals is going to be depracated (i.e., turned off by ; default) in the next version of PHP, because it often leads to security bugs. ; Read http://php.net/manual/en/security.registerglobals.php for further ; information. ; - display_errors = Off [Security] ; With this directive set to off, errors that occur during the execution of ; scripts will no longer be displayed as a part of the script output, and thus, ; will no longer be exposed to remote users. With some errors, the error message ; content may expose information about your script, web server, or database ; server that may be exploitable for hacking. Production sites should have this ; directive set to off. ; - log_errors = On [Security] ; This directive complements the above one. Any errors that occur during the ; execution of your script will be logged (typically, to your server's error log, ; but can be configured in several ways). Along with setting display_errors to off, ; this setup gives you the ability to fully understand what may have gone wrong, ; without exposing any sensitive information to remote users. ; - output_buffering = 4096 [Performance] ; Set a 4KB output buffer. Enabling output buffering typically results in less ; writes, and sometimes less packets sent on the wire, which can often lead to ; better performance. The gain this directive actually yields greatly depends ; on which Web server you're working with, and what kind of scripts you're using. ; - register_argc_argv = Off [Performance] ; Disables registration of the somewhat redundant $argv and $argc global ; variables. ; - magic_quotes_gpc = Off [Performance] ; Input data is no longer escaped with slashes so that it can be sent into ; SQL databases without further manipulation. Instead, you should use the ; function addslashes() on each input element you wish to send to a database. ; - variables_order = "GPCS" [Performance] ; The environment variables are not hashed into the $HTTP_ENV_VARS[]. To access ; environment variables, you can use getenv() instead. ; - error_reporting = E_ALL [Code Cleanliness, Security(?)] ; By default, PHP surpresses errors of type E_NOTICE. These error messages ; are emitted for non-critical errors, but that could be a symptom of a bigger ; problem. Most notably, this will cause error messages about the use ; of uninitialized variables to be displayed. ;;;;;;;;;;;;;;;;;;;; ; Language Options ; ;;;;;;;;;;;;;;;;;;;; ; Enable the PHP scripting language engine under Apache. engine = On ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized. ; NOTE: Using short tags should be avoided when developing applications or ; libraries that are meant for redistribution, or deployment on PHP ; servers which are not under your control, because short tags may not ; be supported on the target server. For portable, redistributable code, ; be sure not to use short tags. short_open_tag = On ; The number of significant digits displayed in floating point numbers. precision = 14 ; Output buffering allows you to send header lines (including cookies) even ; after you send body content, at the price of slowing PHP's output layer a ; bit. You can enable output buffering during runtime by calling the output ; buffering functions. You can also enable output buffering for all files by ; setting this directive to On. If you wish to limit the size of the buffer ; to a certain size - you can use a maximum number of bytes instead of 'On', as ; a value for this directive (e.g., output_buffering=4096). output_buffering = 4096 ; You can redirect all of the output of your scripts to a function. For ; example, if you set output_handler to "mb_output_handler", character ; encoding will be transparently converted to the specified encoding. ; Setting any output handler automatically turns on output buffering. ; Note: People who wrote portable scripts should not depend on this ini ; directive. Instead, explicitly set the output handler using ob_start(). ; Using this ini directive may cause problems unless you know what script ; is doing. ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" ; and you cannot use both "ob_gzhandler" and "zlib.output_compression". ;output_handler = ; Transparent output compression using the zlib library ; Valid values for this option are 'off', 'on', or a specific buffer size ; to be used for compression (default is 4KB) ; Note: Resulting chunk size may vary due to nature of compression. PHP ; outputs chunks that are few handreds bytes each as a result of compression. ; If you want larger chunk size for better performence, enable output_buffering ; also. ; Note: output_handler must be empty if this is set 'On' !!!! ; Instead you must use zlib.output_handler. zlib.output_compression = Off ; You cannot specify additional output handlers if zlib.output_compression ; is activated here. This setting does the same as output_handler but in ; a different order. ;zlib.output_handler = ; Implicit flush tells PHP to tell the output layer to flush itself ; automatically after every output block. This is equivalent to calling the ; PHP function flush() after each and every call to print() or echo() and each ; and every HTML block. Turning this option on has serious performance ; implications and is generally recommended for debugging purposes only. implicit_flush = Off ; The unserialize callback function will called (with the undefind class' ; name as parameter), if the unserializer finds an undefined class ; which should be instanciated. ; A warning appears if the specified function is not defined, or if the ; function doesn't include/implement the missing class. ; So only set this entry, if you really want to implement such a ; callback-function. unserialize_callback_func= ; Whether to enable the ability to force arguments to be passed by reference ; at function call time. This method is deprecated and is likely to be ; unsupported in future versions of PHP/Zend. The encouraged method of ; specifying which arguments should be passed by reference is in the function ; declaration. You're encouraged to try and turn this option Off and make ; sure your scripts work properly with it in order to ensure they will work ; with future versions of the language (you will receive a warning each time ; you use this feature, and the argument will be passed by value instead of by ; reference). allow_call_time_pass_reference = Off ; ; Safe Mode ; safe_mode = Off ; By default, Safe Mode does a UID compare check when ; opening files. If you want to relax this to a GID compare, ; then turn on safe_mode_gid. safe_mode_gid = Off ; When safe_mode is on, UID/GID checks are bypassed when ; including files from this directory and its subdirectories. ; (directory must also be in include_path or full path must ; be used when including) safe_mode_include_dir = ; When safe_mode is on, only executables located in the safe_mode_exec_dir ; will be allowed to be executed via the exec family of functions. safe_mode_exec_dir = ; Setting certain environment variables may be a potential security breach. ; This directive contains a comma-delimited list of prefixes. In Safe Mode, ; the user may only alter environment variables whose names begin with the ; prefixes supplied here. By default, users will only be able to set ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). ; ; Note: If this directive is empty, PHP will let the user modify ANY ; environment variable! safe_mode_allowed_env_vars = PHP_ ; This directive contains a comma-delimited list of environment variables that ; the end user won't be able to change using putenv(). These variables will be ; protected even if safe_mode_allowed_env_vars is set to allow to change them. safe_mode_protected_env_vars = LD_LIBRARY_PATH ; open_basedir, if set, limits all file operations to the defined directory ; and below. This directive makes most sense if used in a per-directory ; or per-virtualhost web server configuration file. This directive is ; NOT affected by whether Safe Mode is turned On or Off. ;open_basedir = ; This directive allows you to disable certain functions for security reasons. ; It receives a comma-delimited list of function names. This directive is ; NOT affected by whether Safe Mode is turned On or Off. disable_functions = ; Colors for Syntax Highlighting mode. Anything that's acceptable in ; <font color="??????"> would work. ;highlight.string = #DD0000 ;highlight.comment = #FF9900 ;highlight.keyword = #007700 ;highlight.bg = #FFFFFF ;highlight.default = #0000BB ;highlight.html = #000000 ; ; Misc ; ; Decides whether PHP may expose the fact that it is installed on the server ; (e.g. by adding its signature to the Web server header). It is no security ; threat in any way, but it makes it possible to determine whether you use PHP ; on your server or not. expose_php = On ;;;;;;;;;;;;;;;;;;; ; Resource Limits ; ;;;;;;;;;;;;;;;;;;; max_execution_time = 30 ; Maximum execution time of each script, in seconds max_input_time = 60 ; Maximum amount of time each script may spend parsing request data memory_limit = 8M ; Maximum amount of memory a script may consume (8MB) ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Error handling and logging ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; error_reporting is a bit-field. Or each number up to get desired error ; reporting level ; E_ALL - All errors and warnings ; E_ERROR - fatal run-time errors ; E_WARNING - run-time warnings (non-fatal errors) ; E_PARSE - compile-time parse errors ; E_NOTICE - run-time notices (these are warnings which often result ; from a bug in your code, but it's possible that it was ; intentional (e.g., using an uninitialized variable and ; relying on the fact it's automatically initialized to an ; empty string) ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's ; initial startup ; E_COMPILE_ERROR - fatal compile-time errors ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) ; E_USER_ERROR - user-generated error message ; E_USER_WARNING - user-generated warning message ; E_USER_NOTICE - user-generated notice message ; ; Examples: ; ; - Show all errors, except for notices ; error_reporting = E_ALL & ~E_NOTICE ; ; - Show only errors ; ;error_reporting = E_COMPILE_ERROR\|E_ERROR\|E_CORE_ERROR ; ; - Show all errors ; ;error_reporting = E_ALL ; Print out errors (as a part of the output). For production web sites, ; you're strongly encouraged to turn this feature off, and use error logging ; instead (see below). Keeping display_errors enabled on a production web site ; may reveal security information to end users, such as file paths on your Web ; server, your database schema or other information. display_errors = Off ; Even when display_errors is on, errors that occur during PHP's startup ; sequence are not displayed. It's strongly recommended to keep ; display_startup_errors off, except for when debugging. display_startup_errors = Off ; Log errors into a log file (server-specific log, stderr, or error_log (below)) ; As stated above, you're strongly advised to use error logging in place of ; error displaying on production web sites. log_errors = On ; Set maximum length of log_errors. In error_log information about the source is ; added. The default is 1024 and 0 allows to not apply any maximum length at all. log_errors_max_len = 1024 ; Do not log repeated messages. Repeated errors must occur in same file on same ; line until ignore_repeated_source is set true. ignore_repeated_errors = Off ; Ignore source of message when ignoring repeated messages. When this setting ; is On you will not log errors with repeated messages from different files or ; sourcelines. ignore_repeated_source = Off ; If this parameter is set to Off, then memory leaks will not be shown (on ; stdout or in the log). This has only effect in a debug compile, and if ; error reporting includes E_WARNING in the allowed list report_memleaks = On ; Store the last error/warning message in $php_errormsg (boolean). track_errors = Off ; Disable the inclusion of HTML tags in error messages. ;html_errors = Off ; If html_errors is set On PHP produces clickable error messages that direct ; to a page describing the error or function causing the error in detail. ; You can download a copy of the PHP manual from http://www.php.net/docs.php ; and change docref_root to the base URL of your local copy including the ; leading '/'. You must also specify the file extension being used including ; the dot. ;docref_root = /phpmanual/ ;docref_ext = .html ; String to output before an error message. ;error_prepend_string = "<font color=ff0000>" ; String to output after an error message. ;error_append_string = "</font>" ; Log errors to specified file. ;error_log = filename ; Log errors to syslog (Event Log on NT, not valid in Windows 95). ;error_log = syslog ;;;;;;;;;;;;;;;;; ; Data Handling ; ;;;;;;;;;;;;;;;;; ; ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3 ; The separator used in PHP generated URLs to separate arguments. ; Default is "&". ;arg_separator.output = "&" ; List of separator(s) used by PHP to parse input URLs into variables. ; Default is "&". ; NOTE: Every character in this directive is considered as separator! ;arg_separator.input = ";&" ; This directive describes the order in which PHP registers GET, POST, Cookie, ; Environment and Built-in variables (G, P, C, E & S respectively, often ; referred to as EGPCS or GPC). Registration is done from left to right, newer ; values override older values. variables_order = "GPCS" ; Whether or not to register the EGPCS variables as global variables. You may ; want to turn this off if you don't want to clutter your scripts' global scope ; with user data. This makes most sense when coupled with track_vars - in which ; case you can access all of the GPC variables through the $HTTP__VARS[], ; variables. ; ; You should do your best to write your scripts so that they do not require ; register_globals to be on; Using form variables as globals can easily lead ; to possible security problems, if the code is not very well thought of. register_globals = Off ; This directive tells PHP whether to declare the argv&argc variables (that ; would contain the GET information). If you don't use these variables, you ; should turn it off for increased performance. register_argc_argv = On ; Maximum size of POST data that PHP will accept. post_max_size = 8M ; This directive is deprecated. Use variables_order instead. gpc_order = "GPC" ; Magic quotes ; ; Magic quotes for incoming GET/POST/Cookie data. magic_quotes_gpc = Off ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. magic_quotes_runtime = Off ; Use Sybase-style magic quotes (escape ' with '' instead of \'). magic_quotes_sybase = Off ; Automatically add files before or after any PHP document. auto_prepend_file = auto_append_file = ; As of 4.0b4, PHP always outputs a character encoding by default in ; the Content-type: header. To disable sending of the charset, simply ; set it to be empty. ; ; PHP's built-in default is text/html default_mimetype = "text/html" ;default_charset = "iso-8859-1" ; Always populate the $HTTP_RAW_POST_DATA variable. ;always_populate_raw_post_data = On ; Allow handling of WebDAV http requests within PHP scripts (eg. ; PROPFIND, PROPPATCH, MOVE, COPY, etc..) ; If you want to get the post data of those requests, you have to ; set always_populate_raw_post_data as well. ;allow_webdav_methods = On ;;;;;;;;;;;;;;;;;;;;;;;;; ; Paths and Directories ; ;;;;;;;;;;;;;;;;;;;;;;;;; ; UNIX: "/path1:/path2" ;include_path = ".:/php/includes" ; ; Windows: "\path1;\path2" ;include_path = ".;c:\php\includes" ; The root of the PHP pages, used only if nonempty. ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root ; if you are running php as a CGI under any web server (other than IIS) ; see documentation for security issues. The alternate is to use the ; cgi.force_redirect configuration below doc_root = ; The directory under which PHP opens the script using /~usernamem used only ; if nonempty. user_dir = ; Directory in which the loadable extensions (modules) reside. extension_dir = ./ ; Whether or not to enable the dl() function. The dl() function does NOT work ; properly in multithreaded servers, such as IIS or Zeus, and is automatically ; disabled on them. enable_dl = On ; cgi.force_redirect is necessary to provide security running PHP as a CGI under ; most web servers. Left undefined, PHP turns this on by default. You can ; turn it off here AT YOUR OWN RISK ; You CAN safely turn this off for IIS, in fact, you MUST.* ; cgi.force_redirect = 1 ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP ; will look for to know it is OK to continue execution. Setting this variable MAY ; cause security issues, KNOW WHAT YOU ARE DOING FIRST. ; cgi.redirect_status_env = ; ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate ; security tokens of the calling client. This allows IIS to define the ; security context that the request runs under. mod_fastcgi under Apache ; does not currently support this feature (03/17/2002) ; Set to 1 if running under IIS. Default is zero. ; fastcgi.impersonate = 1; ; cgi.rfc2616_headers configuration option tells PHP what type of headers to ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that ; is supported by Apache. When this option is set to 1 PHP will send ; RFC2616 compliant header. ; Set to 1 if running under IIS. Default is zero. ;cgi.rfc2616_headers = 0 ;;;;;;;;;;;;;;;; ; File Uploads ; ;;;;;;;;;;;;;;;; ; Whether to allow HTTP file uploads. file_uploads = On ; Temporary directory for HTTP uploaded files (will use system default if not ; specified). ;upload_tmp_dir = ; Maximum allowed size for uploaded files. upload_max_filesize = 2M ;;;;;;;;;;;;;;;;;; ; Fopen wrappers ; ;;;;;;;;;;;;;;;;;; ; Whether to allow the treatment of URLs (like http:// or ftp://) as files. allow_url_fopen = On ; Define the anonymous ftp password (your email address) ;from="john@doe.com" ; Define the user agent for php to send ;user_agent="PHP" ; Default timeout for socket based streams (seconds) default_socket_timeout = 60 ; If your scripts have to deal with files from Macintosh systems, ; or you are running on a Mac and need to deal with files from ; unix or win32 systems, setting this flag will cause PHP to ; automatically detect the EOL character in those files so that ; fgets() and file() will work regardless of the source of the file. ; auto_detect_line_endings = Off ;;;;;;;;;;;;;;;;;;;;;; ; Dynamic Extensions ; ;;;;;;;;;;;;;;;;;;;;;; ; ; If you wish to have an extension loaded automatically, use the following ; syntax: ; ; extension=modulename.extension ; ; For example, on Windows: ; ; extension=msql.dll ; ; ... or under UNIX: ; ; extension=msql.so ; ; Note that it should be the name of the module only; no directory information ; needs to go here. Specify the location of the extension with the ; extension_dir directive above. ;Windows Extensions ;Note that MySQL and ODBC support is now built in, so no dll is needed for it. ; ;extension=php_bz2.dll ;extension=php_cpdf.dll ;extension=php_crack.dll ;extension=php_curl.dll ;extension=php_db.dll ;extension=php_dba.dll ;extension=php_dbase.dll ;extension=php_dbx.dll ;extension=php_domxml.dll ;extension=php_exif.dll ;extension=php_fbsql.dll ;extension=php_fdf.dll ;extension=php_filepro.dll ;extension=php_gd.dll ;extension=php_gd2.dll ;extension=php_gettext.dll ;extension=php_hyperwave.dll ;extension=php_iconv.dll ;extension=php_ifx.dll ;extension=php_iisfunc.dll ;extension=php_imap.dll ;extension=php_interbase.dll ;extension=php_java.dll ;extension=php_ldap.dll ;extension=php_mbstring.dll ;extension=php_mcrypt.dll ;extension=php_mhash.dll ;extension=php_mime_magic.dll ;extension=php_ming.dll ;extension=php_mssql.dll ;extension=php_msql.dll ;extension=php_oci8.dll ;extension=php_openssl.dll ;extension=php_oracle.dll ;extension=php_pdf.dll ;extension=php_pgsql.dll ;extension=php_printer.dll ;extension=php_shmop.dll ;extension=php_snmp.dll ;extension=php_sockets.dll ;extension=php_sybase_ct.dll ;extension=php_w32api.dll ;extension=php_xmlrpc.dll ;extension=php_xslt.dll ;extension=php_yaz.dll ;extension=php_zip.dll ;;;;;;;;;;;;;;;;;;; ; Module Settings ; ;;;;;;;;;;;;;;;;;;; [Syslog] ; Whether or not to define the various syslog variables (e.g. $LOG_PID, ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In ; runtime, you can define these variables by calling define_syslog_variables(). define_syslog_variables = Off [mail function] ; For Win32 only. SMTP = localhost ; For Win32 only. sendmail_from = me@localhost.com ; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). ;sendmail_path = [Java] ;java.class.path = .\php_java.jar ;java.home = c:\jdk ;java.library = c:\jdk\jre\bin\hotspot\jvm.dll ;java.library.path = .\ [SQL] sql.safe_mode = Off [ODBC] ;odbc.default_db = Not yet implemented ;odbc.default_user = Not yet implemented ;odbc.default_pw = Not yet implemented ; Allow or prevent persistent links. odbc.allow_persistent = On ; Check that a connection is still valid before reuse. odbc.check_persistent = On ; Maximum number of persistent links. -1 means no limit. odbc.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. odbc.max_links = -1 ; Handling of LONG fields. Returns number of bytes to variables. 0 means ; passthru. odbc.defaultlrl = 4096 ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation ; of uodbc.defaultlrl and uodbc.defaultbinmode odbc.defaultbinmode = 1 [MySQL] ; Allow or prevent persistent links. mysql.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. mysql.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. mysql.max_links = -1 ; Default port number for mysql_connect(). If unset, mysql_connect() will use ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look ; at MYSQL_PORT. mysql.default_port = ; Default socket name for local MySQL connects. If empty, uses the built-in ; MySQL defaults. mysql.default_socket = ; Default host for mysql_connect() (doesn't apply in safe mode). mysql.default_host = ; Default user for mysql_connect() (doesn't apply in safe mode). mysql.default_user = ; Default password for mysql_connect() (doesn't apply in safe mode). ; Note that this is generally a bad idea to store passwords in this file. ; Any user with PHP access can run 'echo get_cfg_var("mysql.default_password") ; and reveal this password! And of course, any users with read access to this ; file will be able to reveal the password as well. mysql.default_password = ; Maximum time (in secondes) for connect timeout. -1 means no limimt mysql.connect_timeout = -1 ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and ; SQL-Erros will be displayed. mysql.trace_mode = Off [mSQL] ; Allow or prevent persistent links. msql.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. msql.max_persistent = -1 ; Maximum number of links (persistent+non persistent). -1 means no limit. msql.max_links = -1 [PostgresSQL] ; Allow or prevent persistent links. pgsql.allow_persistent = On ; Detect broken persistent links always with pg_pconnect(). ; Auto reset feature requires a little overheads. pgsql.auto_reset_persistent = Off ; Maximum number of persistent links. -1 means no limit. pgsql.max_persistent = -1 ; Maximum number of links (persistent+non persistent). -1 means no limit. pgsql.max_links = -1 ; Ignore PostgreSQL backends Notice message or not. ; Notice message logging require a little overheads. pgsql.ignore_notice = 0 ; Log PostgreSQL backends Noitce message or not. ; Unless pgsql.ignore_notice=0, module cannot log notice message. pgsql.log_notice = 0 [Sybase] ; Allow or prevent persistent links. sybase.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. sybase.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. sybase.max_links = -1 ;sybase.interface_file = "/usr/sybase/interfaces" ; Minimum error severity to display. sybase.min_error_severity = 10 ; Minimum message severity to display. sybase.min_message_severity = 10 ; Compatability mode with old versions of PHP 3.0. ; If on, this will cause PHP to automatically assign types to results according ; to their Sybase type, instead of treating them all as strings. This ; compatability mode will probably not stay around forever, so try applying ; whatever necessary changes to your code, and turn it off. sybase.compatability_mode = Off [Sybase-CT] ; Allow or prevent persistent links. sybct.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. sybct.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. sybct.max_links = -1 ; Minimum server message severity to display. sybct.min_server_severity = 10 ; Minimum client message severity to display. sybct.min_client_severity = 10 [dbx] ; returned column names can be converted for compatibility reasons ; possible values for dbx.colnames_case are ; "unchanged" (default, if not set) ; "lowercase" ; "uppercase" ; the recommended default is either upper- or lowercase, but ; unchanged is currently set for backwards compatibility dbx.colnames_case = "lowercase" [bcmath] ; Number of decimal digits for all bcmath functions. bcmath.scale = 0 [browscap] ;browscap = extra/browscap.ini [Informix] ; Default host for ifx_connect() (doesn't apply in safe mode). ifx.default_host = ; Default user for ifx_connect() (doesn't apply in safe mode). ifx.default_user = ; Default password for ifx_connect() (doesn't apply in safe mode). ifx.default_password = ; Allow or prevent persistent links. ifx.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. ifx.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. ifx.max_links = -1 ; If on, select statements return the contents of a text blob instead of its id. ifx.textasvarchar = 0 ; If on, select statements return the contents of a byte blob instead of its id. ifx.byteasvarchar = 0 ; Trailing blanks are stripped from fixed-length char columns. May help the ; life of Informix SE users. ifx.charasvarchar = 0 ; If on, the contents of text and byte blobs are dumped to a file instead of ; keeping them in memory. ifx.blobinfile = 0 ; NULL's are returned as empty strings, unless this is set to 1. In that case, ; NULL's are returned as string 'NULL'. ifx.nullformat = 0 [Session] ; Handler used to store/retrieve data. session.save_handler = files ; Argument passed to save_handler. In the case of files, this is the path ; where data files are stored. Note: Windows users have to change this ; variable in order to use PHP's session functions. session.save_path = /tmp ; Whether to use cookies. session.use_cookies = 1 ; This option enables administrators to make their users invulnerable to ; attacks which involve passing session ids in URLs; defaults to 0. ; session.use_only_cookies = 1 ; Name of the session (used as cookie name). session.name = PHPSESSID ; Initialize session on request startup. session.auto_start = 0 ; Lifetime in seconds of cookie or, if 0, until browser is restarted. session.cookie_lifetime = 0 ; The path for which the cookie is valid. session.cookie_path = / ; The domain for which the cookie is valid. session.cookie_domain = ; Handler used to serialize data. php is the standard serializer of PHP. session.serialize_handler = php ; Define the probability that the 'garbage collection' process is started ; on every session initialization. ; The probability is calculated by using gc_probability/gc_dividend, ; e.g. 1/100 means 1%. session.gc_probability = 1 session.gc_dividend = 1000 ; After this number of seconds, stored data will be seen as 'garbage' and ; cleaned up by the garbage collection process. session.gc_maxlifetime = 1440 ; PHP 4.2 and less have an undocumented feature/bug that allows you to ; to initialize a session variable in the global scope, albeit register_globals ; is disabled. PHP 4.3 and later will warn you, if this feature is used. ; You can disable the feature and the warning seperately. At this time, ; the warning is only displayed, if bug_compat_42 is enabled. session.bug_compat_42 = 0 session.bug_compat_warn = 1 ; Check HTTP Referer to invalidate externally stored URLs containing ids. ; HTTP_REFERER has to contain this substring for the session to be ; considered as valid. session.referer_check = ; How many bytes to read from the file. session.entropy_length = 0 ; Specified here to create the session id. session.entropy_file = ;session.entropy_length = 16 ;session.entropy_file = /dev/urandom ; Set to {nocache,private,public,} to determine HTTP caching aspects. ; or leave this empty to avoid sending anti-caching headers. session.cache_limiter = nocache ; Document expires after n minutes. session.cache_expire = 180 ; trans sid support is disabled by default. ; Use of trans sid may risk your users security. ; Use this option with caution. ; - User may send URL contains active session ID ; to other person via. email/irc/etc. ; - URL that contains active session ID may be stored ; in publically accessible computer. ; - User may access your site with the same session ID ; always using URL stored in browser's history or bookmarks. session.use_trans_sid = 0 ; The URL rewriter will look for URLs in a defined set of HTML tags. ; form/fieldset are special; if you include them here, the rewriter will ; add a hidden <input> field with the info which is otherwise appended ; to URLs. If you want XHTML conformity, remove the form entry. ; Note that all valid entries require a "=", even if no value follows. url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" [MSSQL] ; Allow or prevent persistent links. mssql.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. mssql.max_persistent = -1 ; Maximum number of links (persistent+non persistent). -1 means no limit. mssql.max_links = -1 ; Minimum error severity to display. mssql.min_error_severity = 10 ; Minimum message severity to display. mssql.min_message_severity = 10 ; Compatability mode with old versions of PHP 3.0. mssql.compatability_mode = Off ; Valid range 0 - 2147483647. Default = 4096. ;mssql.textlimit = 4096 ; Valid range 0 - 2147483647. Default = 4096. ;mssql.textsize = 4096 ; Limits the number of records in each batch. 0 = all records in one batch. ;mssql.batchsize = 0 ; Use NT authentication when connecting to the server mssql.secure_connection = Off ; Specify max number of processes. Default = 25 ;mssql.max_procs = 25 [Assertion] ; Assert(expr); active by default. ;assert.active = On ; Issue a PHP warning for each failed assertion. ;assert.warning = On ; Don't bail out by default. ;assert.bail = Off ; User-function to be called if an assertion fails. ;assert.callback = 0 ; Eval the expression with current error_reporting(). Set to true if you want ; error_reporting(0) around the eval(). ;assert.quiet_eval = 0 [Ingres II] ; Allow or prevent persistent links. ingres.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. ingres.max_persistent = -1 ; Maximum number of links, including persistents. -1 means no limit. ingres.max_links = -1 ; Default database (format: [node_id::]dbname[/srv_class]). ingres.default_database = ; Default user. ingres.default_user = ; Default password. ingres.default_password = [Verisign Payflow Pro] ; Default Payflow Pro server. pfpro.defaulthost = "test-payflow.verisign.com" ; Default port to connect to. pfpro.defaultport = 443 ; Default timeout in seconds. pfpro.defaulttimeout = 30 ; Default proxy IP address (if required). ;pfpro.proxyaddress = ; Default proxy port. ;pfpro.proxyport = ; Default proxy logon. ;pfpro.proxylogon = ; Default proxy password. ;pfpro.proxypassword = [Sockets] ; Use the system read() function instead of the php_read() wrapper. sockets.use_system_read = On [com] ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs ;com.typelib_file = ; allow Distributed-COM calls ;com.allow_dcom = true ; autoregister constants of a components typlib on com_load() ;com.autoregister_typelib = true ; register constants casesensitive ;com.autoregister_casesensitive = false ; show warnings on duplicate constat registrations ;com.autoregister_verbose = true [Printer] ;printer.default_printer = "" [mbstring] ; language for internal character representation. ;mbstring.language = Japanese ; internal/script encoding. ; Some encoding cannot work as internal encoding. ; (e.g. SJIS, BIG5, ISO-2022-) ;mbstring.internal_encoding = EUC-JP ; http input encoding. ;mbstring.http_input = auto ; http output encoding. mb_output_handler must be ; registered as output buffer to function ;mbstring.http_output = SJIS ; enable automatic encoding translation accoding to ; mbstring.internal_encoding setting. Input chars are ; converted to internal encoding by setting this to On. ; Note: Do _not_ use automatic encoding translation for ; portable libs/applications. ;mbstring.encoding_translation = Off ; automatic encoding detection order. ; auto means ;mbstring.detect_order = auto ; substitute_character used when character cannot be converted ; one from another ;mbstring.substitute_character = none; ; overload(replace) single byte functions by mbstring functions. ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), ; etc. Possible values are 0,1,2,4 or combination of them. ; For example, 7 for overload everything. ; 0: No overload ; 1: Overload mail() function ; 2: Overload str() functions ; 4: Overload ereg*() functions ;mbstring.func_overload = 0 [FrontBase] ;fbsql.allow_persistent = On ;fbsql.autocommit = On ;fbsql.default_database = ;fbsql.default_database_password = ;fbsql.default_host = ;fbsql.default_password = ;fbsql.default_user = "_SYSTEM" ;fbsql.generate_warnings = Off ;fbsql.max_connections = 128 ;fbsql.max_links = 128 ;fbsql.max_persistent = -1 ;fbsql.max_results = 128 ;fbsql.batchSize = 1000 [Crack] ; Modify the setting below to match the directory location of the cracklib ; dictionary files. Include the base filename, but not the file extension. ; crack.default_dictionary = "c:\php\lib\cracklib_dict" [exif] ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. ; With mbstring support this will automatically be converted into the encoding ; given by corresponding encode setting. When empty mbstring.internal_encoding ; is used. For the decode settings you can distinguish between motorola and ; intel byte order. A decode setting cannot be empty. ;exif.encode_unicode = ISO-8859-15 ;exif.decode_unicode_motorola = UCS-2BE ;exif.decode_unicode_intel = UCS-2LE ;exif.encode_jis = ;exif.decode_jis_motorola = JIS ;exif.decode_jis_intel = JIS ; Local Variables: ; tab-width: 4 ; End:	37.11 KB	2026-04-03 07:58
📄 purge_cache_by_url #!/usr/bin/env bash #set -x CURL_ACTION='' CURL_IP='127.0.0.1' CURL_URL='' CURL_PROTO='' CURL_DOMAIN='' function handle_args() { if [[ "$#" -eq 0 ]]; then show_help exit 1 fi while [[ "$1" != '' ]]; do case $1 in -r ) CURL_ACTION='REFRESH' ;; -p ) CURL_ACTION='PURGE' ;; -ip ) shift; CURL_IP="$1" ;; -h ) show_help; exit 1 ;; * ) CURL_URL="$1" ;; esac shift done if [[ "${CURL_ACTION}" == '' ]] \|\| [[ "${CURL_URL}" == '' ]]; then show_help exit 1 fi if [[ "${CURL_IP}" == '' ]]; then echo 'IP parameter passed but no value set!' exit 1 fi if ! [[ "${CURL_URL}" =~ https?:// ]]; then echo 'Please use full URL include http/https!' exit 1 fi if [[ "${CURL_IP}" != '' ]] && [[ "${CURL_IP}" != '127.0.0.1' ]]; then if [[ "${CURL_URL}" =~ 'https://' ]]; then CURL_PROTO='443' else CURL_PROTO='80' fi CURL_DOMAIN=$(echo ${CURL_URL} \| awk -F[/:] '{print $4}') fi } function show_help() { cat <<EOF Usage: purge_cache_byurl -(r\|p) [-ip <ip>] <URL> Purge/Refresh cache for specific URL. Required Arguments: -r\|-p, Refreshes/Purges the cache for specific page. *, Full URL of the specific page to refresh/purge. Optional Arguments: -ip, IP to resolve the hostname of the request to (Only if it differs from what the DNS A record is set to.) Notes: If running on a server other than the one the site is located on, make sure to add this machines IP to the trusted list inside of LiteSpeed Web Server or else the Purge/Refresh requests will not work. EOF } function send_cmd() { if [[ "${CURL_PROTO}" != '' ]] && [[ "${CURL_DOMAIN}" != '' ]]; then CURL_OUTPUT=$(curl --resolve ${CURL_DOMAIN}:${CURL_PROTO}:${CURL_IP} -Iks -X ${CURL_ACTION} "${CURL_URL}" \| grep 'HTTP/' \| awk '{print $2}') else CURL_OUTPUT=$(curl -Iks -X ${CURL_ACTION} "${CURL_URL}" \| grep 'HTTP/' \| awk '{print $2}') fi if [[ "${CURL_OUTPUT}" != '200' ]]; then if [[ "${CURL_OUTPUT}" == '301' ]]; then if [[ "${CURL_NEW_URL}" == '' ]]; then if [[ "${CURL_PROTO}" != '' ]] && [[ "${CURL_DOMAIN}" != '' ]]; then CURL_NEW_URL=$(curl --resolve ${CURL_DOMAIN}:${CURL_PROTO}:${CURL_IP} -Iks -X ${CURL_ACTION} "${CURL_URL}" \| grep 'Location:' \| awk '{print $2}') if [[ "${CURL_NEW_URL}" =~ 'https://' ]]; then CURL_PROTO='443' else CURL_PROTO='80' fi CURL_DOMAIN=$(echo ${CURL_NEW_URL} \| awk -F[/:] '{print $4}') else CURL_NEW_URL=$(curl -Iks -X ${CURL_ACTION} "${CURL_URL}" \| grep 'Location:' \| awk '{print $2}') fi CURL_URL="${CURL_NEW_URL}" send_cmd else echo 'URL keeps redirecting! Please make sure URL is final URL after any https or other redirects!' exit 1 fi elif [[ "${CURL_OUTPUT}" == '405' ]]; then echo 'This IP is not valid to PURGE or REFRESH cache! Please add this IP as a trusted IP inside of LiteSpeed Web Server!' exit 1 else echo 'HTTP return code is not 200! Please make sure this is a valid page!' exit 1 fi else echo "Page ${CURL_ACTION} Successfully!" fi } function main() { handle_args "$@" send_cmd exit 0 } main "$@"	3.23 KB	2026-04-03 07:58
📄 rc-inst.sh #!/bin/sh CURDIR=`dirname "$0"` cd $CURDIR CURDIR=`pwd` PIDFILE=/tmp/lshttpd/lshttpd.pid INST_USER=`id` INST_UID=`expr "$INST_USER" : 'uid=$.$(.) gid=.'` INST_USER=`expr "$INST_USER" : 'uid=.($.$) gid=.'` if [ $INST_UID != "0" ]; then cat <<EOF [ERROR] Only root user can install the rc script! EOF exit 1 fi test_running() { RUNNING=0 if [ -f $PIDFILE ] ; then FPID=`cat $PIDFILE` if [ "x$FPID" != "x" ]; then kill -0 $FPID 2>/dev/null if [ $? -eq 0 ] ; then RUNNING=1 PID=$FPID fi fi fi } if [ "x`uname -s`" = "xDarwin" ]; then STARTUP_ITEM=/System/Library/StartupItems/lsws if [ ! -d $STARTUP_ITEM ]; then mkdir $STARTUP_ITEM fi cp -f "$CURDIR/lsws.rc" $STARTUP_ITEM/lsws cat <<EOF >$STARTUP_ITEM/StartupParameters.plist { Description = "LiteSpeed web server"; Provides = ("Web Server"); Requires = ("DirectoryServices"); Uses = ("Disks", "NFS"); OrderPreference = "None"; } EOF exit 0 fi if [ "x`uname -s`" = "xFreeBSD" ]; then if [ -d "/etc/rc.d" ]; then if [ -e "/usr/local/etc/rc.d/lsws.sh" ]; then rm -f /usr/local/etc/rc.d/lsws.sh fi cp -f "$CURDIR/lsws.rc" /etc/rc.d/lsws chmod 755 /etc/rc.d/lsws echo "[OK] The startup script has been successfully installed!" exit 0 else cat <<EOF [ERROR] /etc/rc.d/ does not exit in this FreeBSD system! EOF exit 1 fi fi INIT_DIR="" # actually only FreeBSD use /etc/rc.d for path in /etc/init.d /etc/rc.d/init.d do if [ "${INIT_DIR}" = "" ]; then if [ -d "$path" ]; then INIT_DIR=$path fi fi done AP_PROC=httpd if [ -e /etc/debian_version ] && [ ! -d /usr/local/cpanel ]; then AP_PROC=apache2 fi # use systemd if possible, need to use same method as apache SYSTEMDDIR="" SYSTEMBIN=`which systemctl 2>/dev/null` if [ $? -eq 0 ] ; then for path in /etc/systemd/system /usr/lib/systemd/system /lib/systemd/system do if [ "${SYSTEMDDIR}" = "" ] ; then if [ -d "$path" ] && [ -e ${path}/${AP_PROC}.service ] ; then SYSTEMDDIR=$path fi fi done #DirectAdmin may not have /etc/systemd/system/httpd.service, but need to use systemd if [ "${SYSTEMDDIR}" = "" ] && [ -d /usr/local/directadmin ] && [ -d /etc/systemd/system ]; then SYSTEMDDIR=/etc/systemd/system if [ -f /etc/systemd/system/lsws.service ]; then rm /etc/systemd/system/lsws.service fi fi # For centos7, use /usr/lib/systemd/system, where apache systemd file is. if [ "${SYSTEMDDIR}" = "" ] && [ -f /etc/redhat-release ] && [ -d /usr/lib/systemd/system ]; then SYSTEMDDIR=/usr/lib/systemd/system fi if [ "${SYSTEMDDIR}" = "" ] && [ -f /etc/lsb-release ] && [ -d /etc/systemd/system ]; then SYSTEMDDIR=/etc/systemd/system if [ -f /etc/systemd/system/lsws.service ]; then rm /etc/systemd/system/lsws.service fi fi fi if [ "${SYSTEMDDIR}" != "" ] ; then if [ "${INIT_DIR}" != "" ] && [ -e ${INIT_DIR}/lsws ] ; then echo "Removing ${INIT_DIR}/lsws" rm -f ${INIT_DIR}/lsws fi cp -f ${CURDIR}/lshttpd.service ${SYSTEMDDIR}/lshttpd.service ln -sf ${SYSTEMDDIR}/lshttpd.service ${SYSTEMDDIR}/lsws.service chmod 644 ${SYSTEMDDIR}/lshttpd.service if [ -d /usr/local/cpanel ] && [ -f ${SYSTEMDDIR}/httpd.service ] && [ ! -L ${SYSTEMDDIR}/httpd.service ] ; then test_running if [ $RUNNING -eq 1 ]; then mv ${SYSTEMDDIR}/httpd.service ${SYSTEMDDIR}/httpd.service.ls_bak ln -sf ${SYSTEMDDIR}/lshttpd.service ${SYSTEMDDIR}/httpd.service fi fi if [ -d /usr/local/psa ] && [ -f ${SYSTEMDDIR}/${AP_PROC}.service ] && [ ! -L ${SYSTEMDDIR}/${AP_PROC}.service ] ; then test_running if [ $RUNNING -eq 1 ]; then systemctl disable ${AP_PROC}.service mv ${SYSTEMDDIR}/${AP_PROC}.service ${SYSTEMDDIR}/${AP_PROC}.service.ls_bak ln -sf ${SYSTEMDDIR}/lshttpd.service ${SYSTEMDDIR}/${AP_PROC}.service fi fi systemctl daemon-reload systemctl enable lshttpd.service if [ $? -eq 0 ]; then echo "[OK] lshttpd.service has been successfully installed!" exit 0 else echo "[ERROR] failed to enable lshttpd.service in systemd!" exit 1 fi fi if [ "${INIT_DIR}" = "" ]; then echo "[ERROR] failed to find the init.d directory!" exit 1 fi if [ -f ${INIT_DIR}/lsws ]; then rm -f ${INIT_DIR}/lsws fi if [ -f "/etc/gentoo-release" ]; then cp "${CURDIR}/lsws.rc.gentoo" ${INIT_DIR}/lsws chmod 755 ${INIT_DIR}/lsws rc-update add lsws default echo "[OK] The startup script has been successfully installed!" exit 0 fi if [ -e /etc/debian_version ]; then cp "$CURDIR/lsws.rc" ${INIT_DIR}/lsws chmod 755 ${INIT_DIR}/lsws update-rc.d lsws defaults echo "[OK] The startup script has been successfully installed!" exit 0 fi if [ -d "${INIT_DIR}/rc2.d" ]; then INIT_BASE_DIR=${INIT_DIR} else INIT_BASE_DIR=`dirname ${INIT_DIR}` fi cp "$CURDIR/lsws.rc" ${INIT_DIR}/lsws chmod 755 ${INIT_DIR}/lsws if [ -d "${INIT_BASE_DIR}/runlevel/default" ]; then ln -fs ${INIT_DIR}/lsws ${INIT_BASE_DIR}/runlevel/default/S88lsws ln -fs ${INIT_DIR}/lsws ${INIT_BASE_DIR}/runlevel/default/K12lsws fi if [ -d "${INIT_BASE_DIR}/rc2.d" ]; then ln -fs ${INIT_DIR}/lsws ${INIT_BASE_DIR}/rc2.d/S88lsws ln -fs ${INIT_DIR}/lsws ${INIT_BASE_DIR}/rc2.d/K12lsws fi if [ -d "${INIT_BASE_DIR}/rc3.d" ]; then ln -fs ${INIT_DIR}/lsws ${INIT_BASE_DIR}/rc3.d/S88lsws ln -fs ${INIT_DIR}/lsws ${INIT_BASE_DIR}/rc3.d/K12lsws fi if [ -d "${INIT_BASE_DIR}/rc5.d" ]; then ln -fs ${INIT_DIR}/lsws ${INIT_BASE_DIR}/rc5.d/S88lsws ln -fs ${INIT_DIR}/lsws ${INIT_BASE_DIR}/rc5.d/K12lsws fi if [ -d "${INIT_BASE_DIR}/rc0.d" ]; then ln -fs ${INIT_DIR}/lsws ${INIT_BASE_DIR}/rc0.d/K12lsws fi if [ -d "${INIT_BASE_DIR}/rc1.d" ]; then ln -fs ${INIT_DIR}/lsws ${INIT_BASE_DIR}/rc1.d/K12lsws fi if [ -d "${INIT_BASE_DIR}/rc6.d" ]; then ln -fs ${INIT_DIR}/lsws ${INIT_BASE_DIR}/rc6.d/K12lsws fi echo "[OK] The startup script has been successfully installed!" exit 0	6.24 KB	2026-04-03 07:58
📄 rc-uninst.sh #!/bin/sh CURDIR=`dirname "$0"` cd $CURDIR CURDIR=`pwd` INST_USER=`id` INST_UID=`expr "$INST_USER" : 'uid=$.$(.) gid=.'` INST_USER=`expr "$INST_USER" : 'uid=.($.$) gid=.'` if [ $INST_UID != "0" ]; then cat <<EOF [ERROR] Only root user can uninstall the rc script! EOF exit 1 fi if [ "x`uname -s`" = "xDarwin" ]; then STARTUP_ITEM=/System/Library/StartupItems/lsws if [ -d ${STARTUP_ITEM} ]; then rm -rf ${STARTUP_ITEM} echo "[OK] The startup script has been successfully uninstalled!" fi exit 0 fi AP_PROC=httpd if [ -e /etc/debian_version ] && [ ! -d /usr/local/cpanel ]; then AP_PROC=apache2 fi if [ "x`uname -s`" = "xFreeBSD" ]; then if [ -e "/etc/rc.d/lsws" ]; then rm -f /etc/rc.d/lsws echo "[OK] The startup script has been successfully uninstalled!" fi if [ -e "/usr/local/etc/rc.d/lsws.sh" ]; then rm -f /usr/local/etc/rc.d/lsws.sh fi if [ -e "/etc/rc.d/${AP_PROC}.ls_bak" ] ; then mv -f /etc/rc.d/${AP_PROC}.ls_bak /etc/rc.d/${AP_PROC} fi if [ -e "/usr/local/etc/rc.d/${AP_PROC}.ls_bak" ] ; then mv -f /usr/local/etc/rc.d/${AP_PROC}.ls_bak /usr/local/etc/rc.d/${AP_PROC} fi exit 0 fi INIT_DIR="" for path in /etc/init.d /etc/rc.d/init.d do if [ "x$INIT_DIR" = "x" ]; then if [ -d "$path" ]; then INIT_DIR=$path fi fi done for SYSTEMDDIR in /etc/systemd/system /usr/lib/systemd/system /lib/systemd/system do if [ -d ${SYSTEMDDIR} ] && [ -e ${SYSTEMDDIR}/lshttpd.service ] ; then systemctl disable lshttpd.service if [ -e ${SYSTEMDDIR}/lsws.service ] ; then rm -f ${SYSTEMDDIR}/lsws.service fi rm -f ${SYSTEMDDIR}/lshttpd.service if [ -e ${SYSTEMDDIR}/${AP_PROC}.service.ls_bak ] ; then mv -f ${SYSTEMDDIR}/${AP_PROC}.service.ls_bak ${SYSTEMDDIR}/${AP_PROC}.service systemctl enable ${AP_PROC}.service fi systemctl daemon-reload echo "[OK] The startup script has been successfully uninstalled from systemd!" fi done # clean from both systemd and init.d if [ "${INIT_DIR}" = "" ]; then exit 0 fi if [ -f "/etc/gentoo-release" ]; then if [ -e ${INIT_DIR}/lsws ] ; then rc-update del lsws default rm -f ${INIT_DIR}/lsws echo "[OK] The startup script has been successfully uninstalled!" fi exit 0 fi if [ -e /etc/debian_version ]; then if [ -e ${INIT_DIR}/lsws ] ; then update-rc.d lsws remove rm -f ${INIT_DIR}/lsws echo "[OK] The startup script has been successfully uninstalled!" if [ -e "${INIT_DIR}/${AP_PROC}.ls_bak" ] ; then mv -f ${INIT_DIR}/${AP_PROC}.ls_bak ${INIT_DIR}/${AP_PROC} fi fi exit 0 fi if [ -f "${INIT_DIR}/lsws" ]; then rm -f ${INIT_DIR}/lsws echo "[OK] The startup script has been successfully uninstalled!" if [ -e "${INIT_DIR}/${AP_PROC}.ls_bak" ] ; then mv -f ${INIT_DIR}/${AP_PROC}.ls_bak ${INIT_DIR}/${AP_PROC} fi fi if [ -d "$INIT_DIR/rc2.d" ]; then INIT_BASE_DIR=$INIT_DIR else INIT_BASE_DIR=`dirname $INIT_DIR` fi if [ -d "${INIT_BASE_DIR}/runlevel/default" ]; then if [ -e "${INIT_BASE_DIR}/runlevel/default/S88lsws" ] ; then rm -f ${INIT_BASE_DIR}/runlevel/default/S88lsws fi if [ -e "${INIT_BASE_DIR}/runlevel/default/K12lsws" ] ; then rm -f ${INIT_BASE_DIR}/runlevel/default/K12lsws fi fi if [ -d "${INIT_BASE_DIR}/rc2.d" ]; then if [ -e "${INIT_BASE_DIR}/rc2.d/S88lsws" ] ; then rm -f ${INIT_BASE_DIR}/rc2.d/S88lsws fi if [ -e "${INIT_BASE_DIR}/rc2.d/K12lsws" ] ; then rm -f ${INIT_BASE_DIR}/rc2.d/K12lsws fi fi if [ -d "${INIT_BASE_DIR}/rc3.d" ]; then if [ -e "${INIT_BASE_DIR}/rc3.d/S88lsws" ] ; then rm -f ${INIT_BASE_DIR}/rc3.d/S88lsws fi if [ -e "${INIT_BASE_DIR}/rc3.d/K12lsws" ] ; then rm -f ${INIT_BASE_DIR}/rc3.d/K12lsws fi fi if [ -d "${INIT_BASE_DIR}/rc5.d" ]; then if [ -e "${INIT_BASE_DIR}/rc5.d/S88lsws" ] ; then rm -f ${INIT_BASE_DIR}/rc5.d/S88lsws fi if [ -e "${INIT_BASE_DIR}/rc5.d/K12lsws" ] ; then rm -f ${INIT_BASE_DIR}/rc5.d/K12lsws fi fi if [ -d "${INIT_BASE_DIR}/rc0.d" ]; then if [ -e "${INIT_BASE_DIR}/rc0.d/K12lsws" ] ; then rm -f ${INIT_BASE_DIR}/rc0.d/K12lsws fi fi if [ -d "${INIT_BASE_DIR}/rc1.d" ]; then if [ -e "${INIT_BASE_DIR}/rc1.d/K12lsws" ] ; then rm -f ${INIT_BASE_DIR}/rc1.d/K12lsws fi fi if [ -d "${INIT_BASE_DIR}/rc6.d" ]; then if [ -e "${INIT_BASE_DIR}/rc6.d/K12lsws" ] ; then rm -f ${INIT_BASE_DIR}/rc6.d/K12lsws fi fi exit 0	4.61 KB	2026-04-03 07:58
📄 uninstall.sh #!/bin/sh LSINSTALL_DIR=`dirname "$0"` cd $LSINSTALL_DIR LSINSTALL_DIR=`pwd` BASE_DIR=`dirname $LSINSTALL_DIR` BASE_DIR=`dirname $BASE_DIR` cd / INST_USER=`id` INST_UID=`expr "$INST_USER" : 'uid=$.$(.) gid=.'` INST_USER=`expr "$INST_USER" : 'uid=.($.$) gid=.'` if [ $INST_UID != "0" ]; then DIR_OWN=`ls -ld $BASE_DIR \| awk '{print $3}'` if [ "x$DIR_OWN" != "x$INST_USER" ]; then echo "[ERROR] You do not have the permission to uninstall LiteSpeed web server!" exit 1 fi fi cat<<EOF WARNING: All sub directories under "$BASE_DIR" created during installation will be removed! However, conf/ and logs/ can be optionally preserved. If you want to preserve any file under the other sub-directories created by installation script, please backup before proceeding. Manually created sub-directories under "$BASE_DIR" will not be touched. EOF printf "Do you want to uninstall LiteSpeed Web Server? [y/N]" read TMP_YN echo "" if [ "x$TMP_YN" != "xy" ] && [ "x$TMP_YN" != "xY" ]; then echo "Abort!" exit 0 fi if [ "x`uname -s`" = "xFreeBSD" ]; then PS_CMD="ps -ax" else PS_CMD="ps -ef" fi RUNNING_PROCESS=`$PS_CMD \| grep lshttpd \| grep -v grep` if [ "x$RUNNING_PROCESS" != "x" ]; then cat <<EOF LiteSpeed web server is running, it must be stopped in order to continue uninstallation. EOF printf "Would you like to stop it now? [Y/n]" read TMP_YN echo "" if [ "x$TMP_YN" = "x" ] \|\| [ `expr "$TMP_YN" : '[Yy]'` -gt 0 ]; then ${LSINSTALL_DIR}/cp_switch_ws.sh apache RUNNING_PROCESS=`$PS_CMD \| grep lshttpd \| grep -v grep` if [ "x$RUNNING_PROCESS" != "x" ]; then $BASE_DIR/bin/lswsctrl stop fi sleep 5 echo "" RUNNING_PROCESS=`$PS_CMD \| grep lshttpd \| grep -v grep` if [ "x$RUNNING_PROCESS" != "x" ]; then echo "Failed to stop server, uninstallation abort!" exit 1 fi else echo "Uninstallation abort!" exit 1 fi fi if [ $INST_UID != "0" ]; then echo "Uninstalling rc scripts ..." $LSINSTALL_DIR/rc-uninst.sh echo "" fi DELETE_ALL=1 printf "Do you want to keep server configuration files? [y/N]" read TMP_YN echo "" if [ "x$TMP_YN" != "xy" ] && [ "x$TMP_YN" != "xY" ]; then rm -rf $BASE_DIR/conf else DELETE_ALL=0 fi printf "Do you want to keep server log files? [y/N]" read TMP_YN echo "" if [ "x$TMP_YN" != "xy" ] && [ "x$TMP_YN" != "xY" ]; then rm -rf $BASE_DIR/logs else DELETE_ALL=0 fi rm -rf $BASE_DIR/docs rm -rf $BASE_DIR/DEFAULT rm -rf $BASE_DIR/bin rm -rf $BASE_DIR/fcgi-bin rm -rf $BASE_DIR/admin rm -rf $BASE_DIR/add-ons rm -rf $BASE_DIR/autoupdate rm -rf $BASE_DIR/lib rm -f $BASE_DIR/LICENSE* rm -rf $BASE_DIR/phpbuild rm -rf $BASE_DIR/share rm -rf $BASE_DIR/tmp rm -rf $BASE_DIR/modules* rm -rf $BASE_DIR/lsrecaptcha rm -f $BASE_DIR/VERSION* $BASE_DIR/BUILD* if [ $DELETE_ALL -ne 0 ]; then FILES=`ls $BASE_DIR \| wc -l` if [ $FILES -eq 0 ]; then rm -rf $BASE_DIR fi fi echo "LiteSpeed Web Server has been successfully uninstalled."	2.9 KB	2026-04-03 07:58
📄 update.sh CURDIR=`dirname "$0"` cd $CURDIR CURDIR=`pwd` LSWSHOME=`dirname $CURDIR` LSWSHOME=`dirname $LSWSHOME` LOGFILE=$LSWSHOME/autoupdate/update.log CURTIME=`date "+[%Y-%m-%d %k:%M:%S]"` test_license() { if [ -f "$LSWSHOME/conf/serial.no" ]; then cp "$LSWSHOME/conf/serial.no" "./serial.no" fi if [ -f "$LSWSHOME/conf/trial.key" ] && [ ! -f "./trial.key" ]; then cp "$LSWSHOME/conf/trial.key" "./trial.key" fi if [ -f "./serial.no" ]; then bin/lshttpd -r fi if [ -f "./license.key" ] && [ -f "./serial.no" ]; then output=`bin/lshttpd -t` if [ $? -ne 0 ]; then echo $output >> $LOGFILE echo "$CURTIME [ERROR] License key verification failed" >> $LOGFILE exit 1 fi fi } if [ "x$3" = "x" ]; then cat <<EOF Usage: update.sh VERSION EDITION PLATFORM Upgrade to another version of LiteSpeed web server. the package file must exist under $LSWSHOME/autoupdate/ Package file should be lsws-VERSION-EDITION-PLATFORM.tar.gz EOF exit 1 fi cd $LSWSHOME/autoupdate/ echo "$CURTIME Extracting package file" >> $LOGFILE OS=`uname -s` PLATFORM=$3 PACKAGEFILE=$LSWSHOME/autoupdate/lsws-$1-$2-$PLATFORM.tar.gz if [ -f $PACKAGEFILE ]; then gunzip -c $PACKAGEFILE \| tar xf - else echo "$CURTIME [ERROR] Package file $PACKAGEFILE does not exist." >> $LOGFILE exit 1 fi cd $LSWSHOME/autoupdate/lsws-$1 if [ $? -ne 0 ]; then echo "$CURTIME [ERROR] Failed to change current directory to $LSWSHOME/autoupdate/lsws-$1" >> $LOGFILE exit 1 fi . ./functions.sh if [ $? != 0 ]; then echo "$CURTIME [ERROR] Can not include 'functions.sh'." >> $LOGFILE exit 1 fi init LSWS_HOME=$LSWSHOME INTSTALL_TYPE="upgrade" readCurrentConfig if [ $2 = 'ent' ] \|\| [ $2 = 'pro' ]; then test_license fi installation echo "$CURTIME Upgrade to $1 successfully." >> $LOGFILE rm -rf $LSWSHOME/autoupdate/lsws-$1 rm -f $PACKAGEFILE exit 0	1.85 KB	2026-04-03 07:58

Edit File:

Terminal