Wala shell

Advanced PHP File Manager

Server IP: 127.0.0.1 | PHP Version: 8.3.30 | Domains Hosted: 54

Name	Size	Last Modified	Actions
📁 ..	-	2026-03-21 15:45
📄 macros.dwz # Macros for reducing debug info size using dwz(1) utility. # The two default values below should result in dwz taking at most # 3GB of RAM or so on 64-bit hosts and 2.5GB on 32-bit hosts # on the largest .debug files (in mid 2012 those are # libreoffice-debuginfo, debuginfos containing # libxul.so.debug and libwebkitgtk-.so..debug). # This needs to be tuned based on the amount of available RAM # on build boxes for each architecture as well as virtual address # space limitations if dwz is 32-bit program. While it needs less # memory than 64-bit program because pointers are smaller, it can # never have more than 4GB-epsilon of RAM and on some architecture # even less than that (e.g. 2GB). # Number of debugging information entries (DIEs) above which # dwz will stop considering file for multifile optimizations # and enter a low memory mode, in which it will optimize # in about half the memory needed otherwise. %_dwz_low_mem_die_limit 10000000 # Number of DIEs above which dwz will stop processing # a file altogether. %_dwz_max_die_limit 50000000 # On x86_64 increase the higher limit to make libwebkit optimizable. # libwebkit* in mid 2012 contains roughly 87mil DIEs, and 64-bit # dwz is able to optimize it from ~1.1GB to ~410MB using 5.2GB of RAM. %_dwz_max_die_limit_x86_64 110000000 # On ARM, build boxes often have only 512MB of RAM and are very slow. # Lower both the limits. %_dwz_low_mem_die_limit_armv5tel 4000000 %_dwz_low_mem_die_limit_armv7hl 4000000 %_dwz_max_die_limit_armv5tel 10000000 %_dwz_max_die_limit_armv7hl 10000000 %_dwz_limit() %{expand:%%{?%{1}_%{_arch}}%%{!?%{1}_%{_arch}:%%%{1}}} %_find_debuginfo_dwz_opts --run-dwz\\\ --dwz-low-mem-die-limit %{_dwz_limit _dwz_low_mem_die_limit}\\\ --dwz-max-die-limit %{_dwz_limit _dwz_max_die_limit}	1.76 KB	2025-10-30 10:48
📄 macros.fedora-misc # Fedora macros, safe to use after the SRPM build stage # Lists files matching inclusion globs, excluding files matching exclusion # globs # – globs are space-separated lists of shell globs. Such lists require # %{quote:} use when passed as rpm arguments or flags. # Control variables, flags and arguments: # %{listfiles_include} inclusion globs # %{listfiles_exclude} exclusion globs # -i <globs> inclusion globs # -x <globs> exclusion globs # … arguments passed to the macro without flags will be # interpreted as inclusion globs %listfiles(i:x:) %{expand: %if %{lua: print(string.len(rpm.expand("%{?-i}%{?listfiles_include}%")))} listfiles_include=$(realpath -e --relative-base=. %{?-i} %{?listfiles_include} % \| sort -u) %if %{lua: print(string.len(rpm.expand("%{?-x}%{?listfiles_exclude}")))} while IFS= read -r finc ; do realpath -qe --relative-base=. %{?-x} %{?listfiles_exclude} \\ \| sort -u \| grep -q "${finc}" \|\| echo "${finc}" done <<< "${listfiles_include}" %else echo "${listfiles_include}" %endif %endif } # https://github.com/rpm-software-management/rpm/issues/581 # Writes the contents of a list of rpm variables to a macro file # Control variables, flags and arguments: # -f <filename> the macro file to process: # – it must contain corresponding anchors # – for example %writevars -f myfile foo bar will replace: # @@FOO@@ with the rpm evaluation of %{foo} and # @@BAR@@ with the rpm evaluation of %{bar} # in myfile %writevars(f:) %{lua: local fedora = require "fedora.common" local macrofile = rpm.expand("%{-f}") local rpmvars = {} for i = 1, rpm.expand("%#") do table.insert(rpmvars, rpm.expand("%" .. i)) end fedora.writevars(macrofile,rpmvars) } # gpgverify verifies signed sources. There is documentation in the script. %gpgverify(k:s:d:) %{lua: local script = rpm.expand("%{_rpmconfigdir}/redhat/gpgverify ") local keyring = rpm.expand("%{-k}") local signature = rpm.expand("%{-s}") local data = rpm.expand("%{-d}") print(script) if keyring ~= "" then print(rpm.expand("--keyring='%{SOURCE" .. keyring .. "}' ")) end if signature ~= "" then print(rpm.expand("--signature='%{SOURCE" .. signature .. "}' ")) end if data ~= "" then print(rpm.expand("--data='%{SOURCE" .. data .. "}' ")) end }	2.42 KB	2025-10-30 10:48
📄 macros.fedora-misc-srpm # Fedora macros, safe to use at SRPM build stage # A directory for rpm macros %rpmmacrodir /usr/lib/rpm/macros.d # A directory for appdata metainfo. This has changed between releases so a # macro is useful. %_metainfodir %{_datadir}/metainfo # A directory for SWID tag files describing the installation %_swidtagdir %{_prefix}/lib/swidtag/fedoraproject.org # Applies the fedora.wordwrap filter to the content of an rpm variable, and # prints the result. # – putting multiple lines of UTF-8 text inside a variable is usually # accomplished with %{expand:some_text} # Control variables, flags and arguments: # -v <variable_name> (default value: _description) %wordwrap(v:) %{lua: local fedora = require "fedora.common" local variable = "%{?" .. rpm.expand("%{-v*}%{!-v:_description}") .. "}" print(fedora.wordwrap(variable)) } # A single Name: and %package substitute # Control variables, flags and arguments: # %{source_name} the SRPM name # %{source_summary} the SRPM summary # %{source_description} the SRPM description # -n <name> declare a package named <name> # (%package-like behavior) # -v be verbose # %1 declare a package named %{source_name}-%{%1} # (%package-like behavior) %new_package(n:v) %{lua: local fedora = require "fedora.common" local pkg_name = fedora.readflag("n") local verbose = fedora.hasflag("v") local name_suffix = fedora.read("1") local source_name = fedora.read("source_name") local first = not ( fedora.read("name") or fedora.read("currentname") ) fedora.new_package(source_name, pkg_name, name_suffix, first, verbose) }	1.68 KB	2025-10-30 10:48
📄 macros.forge # Computes forge-related variables for use in the rest of the spec file # Control variables, flags and arguments: # %{forgeurl<number>} the project url on the target forge # %{tag<number>} the packaged tag, OR # %{commit<number>} the packaged commit, OR # %{version<number>} the packaged version # – %{version}/%{version0} are set via: # Version: # – because git is lacking a built-in version # reference, %{version<number>} will be translated # into %{tag<number>} using unreliable heuristics; # set %{tag<number>} directly if those fail # %{date<number>} the packaged timestamp # … %forgemeta will compute a huge number of variables: # — the packager can override it by setting some of # those before the %forgemeta call # – use the -i flag to list those variables # -z <number> only process the zth block of definitions # "" for the no-suffix block # -i list the resulting variable values # -s silently ignore problems in %{forgeurl<number>} # -v be verbose # -a process all sources in one go, instead of using # separate -z calls %forgemeta(z:isva) %{lua: local fedora = require "fedora.common" local forge = require "fedora.srpm.forge" local verbose = rpm.expand("%{-v}") ~= "" local informative = rpm.expand("%{-i}") ~= "" local silent = rpm.expand("%{-s}") ~= "" local processall = (rpm.expand("%{-a}") ~= "") and (rpm.expand("%{-z}") == "") if processall then for _,s in pairs(fedora.getsuffixes("forgeurl")) do forge.meta(s,verbose,informative,silent) end else forge.meta(rpm.expand("%{-z}"),verbose,informative,silent) end } # Unpacks sources computed by %forgemeta # Control variables, flags and arguments: # %{forgesource<number>} the source archive that will be processed # %{forgesetupargs<number>} %setup arguments # -z <number> only process the zth block of definitions # "" for the no-suffix block # -v be verbose # -a process all sources in one go, instead of using # separate -z calls %forgesetup(z:va) %{lua: local fedora = require "fedora.common" if (rpm.expand("%{-z}") == "") and (rpm.expand("%{-a}") ~= "") then for _,s in pairs(fedora.getsuffixes("forgesetupargs")) do print(rpm.expand("%setup %{!-v:-q} %{?forgesetupargs" .. s .. "}\\n")) end else print( rpm.expand("%setup %{!-v:-q} %{?forgesetupargs" .. rpm.expand("%{-z}") .. "}\\n")) end } # Calls %autosetup using %forgemeta results # – this will probably be removed since it is unsafe in presence of multiple # sources # Control variables, flags and arguments: # -z <number> process the zth block of definitions # -v -N -S -p relayed to %autosetup %forgeautosetup(z:vNS:p:q) %{lua: print(rpm.expand("%autosetup %{-v} %{-N} %{?-S} %{?-p} %{?forgesetupargs" .. rpm.expand("%{-z*}") .. "}\\n")) }	3.25 KB	2025-10-30 10:48
📄 macros.java-srpm # Arches that OpenJDK and dependent packages run on %java_arches aarch64 ppc64le s390x x86_64	94 B	2025-10-30 10:48
📄 macros.ldc-srpm # arches that ldc builds on %ldc_arches %{ix86} x86_64 %{arm} aarch64	70 B	2025-10-30 10:48
📄 macros.ldconfig #%ldconfig /sbin/ldconfig %ldconfig_post(n:) %{?ldconfig:%post -p %ldconfig %{?} %{-n:-n %{-n}}\ %end} %ldconfig_postun(n:) %{?ldconfig:%postun -p %ldconfig %{?} %{-n:-n %{-n}}\ %end} %ldconfig_scriptlets(n:) %{?ldconfig:\ %ldconfig_post %{?} %{-n:-n %{-n}}\ %ldconfig_postun %{?} %{-n:-n %{-n}}\ }	307 B	2025-10-30 10:48
📄 macros.mono-srpm # arches that mono builds on %mono_arches %{ix86} x86_64 sparc sparcv9 ia64 %{arm} aarch64 alpha s390x ppc ppc64 ppc64le %_monodir %{_prefix}/lib/mono %_monogacdir %{_monodir}/gac	181 B	2025-10-30 10:48
📄 macros.nodejs-srpm # nodejs_arches lists what arches Node.js and dependent packages run on. # # Enabling Node.js on other arches requires porting the V8 JavaScript JIT to # those arches. Support for POWER and aarch64 arrived in nodejs v4. Support # for s390x arrived in nodejs v6 %nodejs_arches %{ix86} x86_64 %{arm} aarch64 %{power64} s390x	324 B	2025-10-30 10:48
📄 macros.valgrind-srpm # valgrind_arches lists what arches Valgrind works on %valgrind_arches %{ix86} x86_64 ppc ppc64 ppc64le s390x armv7hl aarch64	127 B	2025-10-30 10:48
📄 macros.vpath # ---- VPATH default settings # directory where CMakeLists.txt/meson.build/etc. are placed %_vpath_srcdir . # directory (doesn't need to exist) where all generated build files will be placed %_vpath_builddir %{_vendor}-%{_target_os}-build	241 B	2025-10-30 10:48

Terminal