Wala shell

Advanced PHP File Manager

Server IP: 127.0.0.1 | PHP Version: 8.3.30 | Domains Hosted: 54

Name	Size	Last Modified
📁 ..	-	2025-05-25 12:27
📄 README.rst ====================================== Client Side Operations Timeouts Tests ====================================== .. contents:: ---- Introduction ============ This document describes the tests that drivers MUST run to validate the behavior of the timeoutMS option. These tests are broken up into automated YAML/JSON tests and additional prose tests. Spec Tests ========== This directory contains a set of YAML and JSON spec tests. Drivers MUST run these as described in the "Unified Test Runner" specification. Because the tests introduced in this specification are timing-based, there is a risk that some of them may intermittently fail without any bugs being present in the driver. As a mitigatio, drivers MAY execute these tests in two new Evergreen tasks that use single-node replica sets: one with only authentication enabled and another with both authentication and TLS enabled. Drivers that choose to do so SHOULD use the ``single-node-auth.json`` and ``single-node-auth-ssl.json`` files in the ``drivers-evergreen-tools`` repository to create these clusters. Prose Tests =========== There are some tests that cannot be expressed in the unified YAML/JSON format. For each of these tests, drivers MUST create a MongoClient without the ``timeoutMS`` option set (referred to as ``internalClient``). Any fail points set during a test MUST be unset using ``internalClient`` after the test has been executed. All MongoClient instances created for tests MUST be configured with read/write concern ``majority``, read preference ``primary``, and command monitoring enabled to listen for ``command_started`` events. Multi-batch writes ~~~~~~~~~~~~~~~~~~ This test MUST only run against server versions 4.4 and higher. #. Using ``internalClient``, drop the ``db.coll`` collection. #. Using ``internalClient``, set the following fail point: .. code:: javascript { configureFailPoint: "failCommand", mode: { times: 2 }, data: { failCommands: ["insert"], blockConnection: true, blockTimeMS: 15 } } #. Create a new MongoClient (referred to as ``client``) with ``timeoutMS=20``. #. Using ``client``, insert 100,001 empty documents in a single ``insertMany`` call. - Expect this to fail with a timeout error. #. Verify that two ``insert`` commands were executed against ``db.coll`` as part of the ``insertMany`` call. maxTimeMS is not set for commands sent to mongocryptd ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This test MUST only be run against enterprise server versions 4.2 and higher. #. Launch a mongoryptd process on 23000. #. Create a MongoClient (referred to as ``client``) using the URI ``mongodb://localhost:23000/?timeoutMS=1000``. #. Using ``client``, execute the ``{ ping: 1 }`` command against the ``admin`` database. #. Verify via command monitoring that the ``ping`` command sent did not contain a ``maxTimeMS`` field. ClientEncryption ~~~~~~~~~~~~~~~~ Each test under this category MUST only be run against server versions 4.4 and higher. In these tests, ``LOCAL_MASTERKEY`` refers to the following base64: .. code:: javascript Mng0NCt4ZHVUYUJCa1kxNkVyNUR1QURhZ2h2UzR2d2RrZzh0cFBwM3R6NmdWMDFBMUN3YkQ5aXRRMkhGRGdQV09wOGVNYUMxT2k3NjZKelhaQmRCZGJkTXVyZG9uSjFk For each test, perform the following setup: #. Using ``internalClient``, drop and create the ``keyvault.datakeys`` collection. #. Create a MongoClient (referred to as ``keyVaultClient``) with ``timeoutMS=10``. #. Create a ``ClientEncryption`` object that wraps ``keyVaultClient`` (referred to as ``clientEncryption``). Configure this object with ``keyVaultNamespace`` set to ``keyvault.datakeys`` and the following KMS providers map: .. code:: javascript { "local": { "key": <base64 decoding of LOCAL_MASTERKEY> } } createDataKey ````````````` #. Using ``internalClient``, set the following fail point: .. code:: javascript { configureFailPoint: "failCommand", mode: { times: 1 }, data: { failCommands: ["insert"], blockConnection: true, blockTimeMS: 15 } } #. Call ``clientEncryption.createDataKey()`` with the ``local`` KMS provider. - Expect this to fail with a timeout error. #. Verify that an ``insert`` command was executed against to ``keyvault.datakeys`` as part of the ``createDataKey`` call. encrypt ``````` #. Call ``client_encryption.createDataKey()`` with the ``local`` KMS provider. - Expect a BSON binary with subtype 4 to be returned, referred to as ``datakeyId``. #. Using ``internalClient``, set the following fail point: .. code:: javascript { configureFailPoint: "failCommand", mode: { times: 1 }, data: { failCommands: ["find"], blockConnection: true, blockTimeMS: 15 } } #. Call ``clientEncryption.encrypt()`` with the value ``hello``, the algorithm ``AEAD_AES_256_CBC_HMAC_SHA_512-Deterministic``, and the keyId ``datakeyId``. - Expect this to fail with a timeout error. #. Verify that a ``find`` command was executed against the ``keyvault.datakeys`` collection as part of the ``encrypt`` call. decrypt ``````` #. Call ``clientEncryption.createDataKey()`` with the ``local`` KMS provider. - Expect this to return a BSON binary with subtype 4, referred to as ``dataKeyId``. #. Call ``clientEncryption.encrypt()`` with the value ``hello``, the algorithm ``AEAD_AES_256_CBC_HMAC_SHA_512-Deterministic``, and the keyId ``dataKeyId``. - Expect this to return a BSON binary with subtype 6, referred to as ``encrypted``. #. Close and re-create the ``keyVaultClient`` and ``clientEncryption`` objects. #. Using ``internalClient``, set the following fail point: .. code:: javascript { configureFailPoint: "failCommand", mode: { times: 1 }, data: { failCommands: ["find"], blockConnection: true, blockTimeMS: 15 } } #. Call ``clientEncryption.decrypt()`` with the value ``encrypted``. - Expect this to fail with a timeout error. #. Verify that a ``find`` command was executed against the ``keyvault.datakeys`` collection as part of the ``decrypt`` call. Background Connection Pooling ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The tests in this section MUST only be run if the server version is 4.4 or higher and the URI has authentication fields (i.e. a username and password). Each test in this section requires drivers to create a MongoClient and then wait for some CMAP events to be published. Drivers MUST wait for up to 10 seconds and fail the test if the specified events are not published within that time. timeoutMS used for handshake commands ````````````````````````````````````` #. Using ``internalClient``, set the following fail point: .. code:: javascript { configureFailPoint: "failCommand", mode: { times: 1 }, data: { failCommands: ["saslContinue"], blockConnection: true, blockTimeMS: 15, appName: "timeoutBackgroundPoolTest" } } #. Create a MongoClient (referred to as ``client``) configured with the following: - ``minPoolSize`` of 1 - ``timeoutMS`` of 10 - ``appName`` of ``timeoutBackgroundPoolTest`` - CMAP monitor configured to listen for ``ConnectionCreatedEvent`` and ``ConnectionClosedEvent`` events. #. Wait for a ``ConnectionCreatedEvent`` and a ``ConnectionClosedEvent`` to be published. timeoutMS is refreshed for each handshake command ````````````````````````````````````````````````` #. Using ``internalClient``, set the following fail point: .. code:: javascript { configureFailPoint: "failCommand", mode: "alwaysOn", data: { failCommands: ["isMaster", "saslContinue"], blockConnection: true, blockTimeMS: 15, appName: "refreshTimeoutBackgroundPoolTest" } } #. Create a MongoClient (referred to as ``client``) configured with the following: - ``minPoolSize`` of 1 - ``timeoutMS`` of 20 - ``appName`` of ``refreshTimeoutBackgroundPoolTest`` - CMAP monitor configured to listen for ``ConnectionCreatedEvent`` and ``ConnectionReady`` events. #. Wait for a ``ConnectionCreatedEvent`` and a ``ConnectionReady`` to be published. Blocking Iteration Methods ~~~~~~~~~~~~~~~~~~~~~~~~~~ Tests in this section MUST only be run against server versions 4.4 and higher and only apply to drivers that have a blocking method for cursor iteration that executes ``getMore`` commands in a loop until a document is available or an error occurs. Tailable cursors ```````````````` #. Using ``internalClient``, drop the ``db.coll`` collection. #. Using ``internalClient``, insert the document ``{ x: 1 }`` into ``db.coll``. #. Using ``internalClient``, set the following fail point: .. code:: javascript { configureFailPoint: "failCommand", mode: "alwaysOn", data: { failCommands: ["getMore"], blockConnection: true, blockTimeMS: 15 } } #. Create a new MongoClient (referred to as ``client``) with ``timeoutMS=20``. #. Using ``client``, create a tailable cursor on ``db.coll`` with ``cursorType=tailable``. - Expect this to succeed and return a cursor with a non-zero ID. #. Call either a blocking or non-blocking iteration method on the cursor. - Expect this to succeed and return the document ``{ x: 1 }`` without sending a ``getMore`` command. #. Call the blocking iteration method on the resulting cursor. - Expect this to fail with a timeout error. #. Verify that a ``find`` command and two ``getMore`` commands were executed against the ``db.coll`` collection during the test. Change Streams `````````````` #. Using ``internalClient``, drop the ``db.coll`` collection. #. Using ``internalClient``, set the following fail point: .. code:: javascript { configureFailPoint: "failCommand", mode: "alwaysOn", data: { failCommands: ["getMore"], blockConnection: true, blockTimeMS: 15 } } #. Create a new MongoClient (referred to as ``client``) with ``timeoutMS=20``. #. Using ``client``, use the ``watch`` helper to create a change stream against ``db.coll``. - Expect this to succeed and return a change stream with a non-zero ID. #. Call the blocking iteration method on the resulting change stream. - Expect this to fail with a timeout error. #. Verify that an ``aggregate`` command and two ``getMore`` commands were executed against the ``db.coll`` collection during the test. GridFS - Upload ~~~~~~~~~~~~~~~ Tests in this section MUST only be run against server versions 4.4 and higher. uploads via openUploadStream can be timed out ````````````````````````````````````````````` #. Using ``internalClient``, drop and re-create the ``db.fs.files`` and ``db.fs.chunks`` collections. #. Using ``internalClient``, set the following fail point: .. code:: javascript { configureFailPoint: "failCommand", mode: { times: 1 }, data: { failCommands: ["insert"], blockConnection: true, blockTimeMS: 15 } } #. Create a new MongoClient (referred to as ``client``) with ``timeoutMS=10``. #. Using ``client``, create a GridFS bucket (referred to as ``bucket``) that wraps the ``db`` database. #. Call ``bucket.open_upload_stream()`` with the filename ``filename`` to create an upload stream (referred to as ``uploadStream``). - Expect this to succeed and return a non-null stream. #. Using ``uploadStream``, upload a single ``0x12`` byte. #. Call ``uploadStream.close()`` to flush the stream and insert chunks. - Expect this to fail with a timeout error. Aborting an upload stream can be timed out `````````````````````````````````````````` This test only applies to drivers that provide an API to abort a GridFS upload stream. #. Using ``internalClient``, drop and re-create the ``db.fs.files`` and ``db.fs.chunks`` collections. #. Using ``internalClient``, set the following fail point: .. code:: javascript { configureFailPoint: "failCommand", mode: { times: 1 }, data: { failCommands: ["delete"], blockConnection: true, blockTimeMS: 15 } } #. Create a new MongoClient (referred to as ``client``) with ``timeoutMS=10``. #. Using ``client``, create a GridFS bucket (referred to as ``bucket``) that wraps the ``db`` database with ``chunkSizeBytes=2``. #. Call ``bucket.open_upload_stream()`` with the filename ``filename`` to create an upload stream (referred to as ``uploadStream``). - Expect this to succeed and return a non-null stream. #. Using ``uploadStream``, upload the bytes ``[0x01, 0x02, 0x03, 0x04]``. #. Call ``uploadStream.abort()``. - Expect this to fail with a timeout error. GridFS - Download ~~~~~~~~~~~~~~~~~ This test MUST only be run against server versions 4.4 and higher. #. Using ``internalClient``, drop and re-create the ``db.fs.files`` and ``db.fs.chunks`` collections. #. Using ``internalClient``, insert the following document into the ``db.fs.files`` collection: .. code:: javascript { "_id": { "$oid": "000000000000000000000005" }, "length": 10, "chunkSize": 4, "uploadDate": { "$date": "1970-01-01T00:00:00.000Z" }, "md5": "57d83cd477bfb1ccd975ab33d827a92b", "filename": "length-10", "contentType": "application/octet-stream", "aliases": [], "metadata": {} } #. Create a new MongoClient (referred to as ``client``) with ``timeoutMS=10``. #. Using ``client``, create a GridFS bucket (referred to as ``bucket``) that wraps the ``db`` database. #. Call ``bucket.open_download_stream`` with the id ``{ "$oid": "000000000000000000000005" }`` to create a download stream (referred to as ``downloadStream``). - Expect this to succeed and return a non-null stream. #. Using ``internalClient``, set the following fail point: .. code:: javascript { configureFailPoint: "failCommand", mode: { times: 1 }, data: { failCommands: ["find"], blockConnection: true, blockTimeMS: 15 } } #. Read from the ``downloadStream``. - Expect this to fail with a timeout error. #. Verify that two ``find`` commands were executed during the read: one against ``db.fs.files`` and another against ``db.fs.chunks``. Server Selection ~~~~~~~~~~~~~~~~ serverSelectionTimeoutMS honored if timeoutMS is not set ```````````````````````````````````````````````````````` #. Create a MongoClient (referred to as ``client``) with URI ``mongodb://invalid/?serverSelectionTimeoutMS=10``. #. Using ``client``, execute the command ``{ ping: 1 }`` against the ``admin`` database. - Expect this to fail with a server selection timeout error after no more than 15ms. timeoutMS honored for server selection if it's lower than serverSelectionTimeoutMS `````````````````````````````````````````````````````````````````````````````````` #. Create a MongoClient (referred to as ``client``) with URI ``mongodb://invalid/?timeoutMS=10&serverSelectionTimeoutMS=20``. #. Using ``client``, run the command ``{ ping: 1 }`` against the ``admin`` database. - Expect this to fail with a server selection timeout error after no more than 15ms. serverSelectionTimeoutMS honored for server selection if it's lower than timeoutMS `````````````````````````````````````````````````````````````````````````````````` #. Create a MongoClient (referred to as ``client``) with URI ``mongodb://invalid/?timeoutMS=20&serverSelectionTimeoutMS=10``. #. Using ``client``, run the command ``{ ping: 1 }`` against the ``admin`` database. - Expect this to fail with a server selection timeout error after no more than 15ms. serverSelectionTimeoutMS honored for server selection if timeoutMS=0 ```````````````````````````````````````````````````````````````````` #. Create a MongoClient (referred to as ``client``) with URI ``mongodb://invalid/?timeoutMS=0&serverSelectionTimeoutMS=10``. #. Using ``client``, run the command ``{ ping: 1 }`` against the ``admin`` database. - Expect this to fail with a server selection timeout error after no more than 15ms. timeoutMS honored for connection handshake commands if it's lower than serverSelectionTimeoutMS ``````````````````````````````````````````````````````````````````````````````````````````````` This test MUST only be run if the server version is 4.4 or higher and the URI has authentication fields (i.e. a username and password). #. Using ``internalClient``, set the following fail point: .. code:: javascript { configureFailPoint: failCommand, mode: { times: 1 }, data: { failCommands: ["saslContinue"], blockConnection: true, blockTimeMS: 15 } } #. Create a new MongoClient (referred to as ``client``) with ``timeoutMS=10`` and ``serverSelectionTimeoutMS=20``. #. Using ``client``, insert the document ``{ x: 1 }`` into collection ``db.coll``. - Expect this to fail with a timeout error after no more than 15ms. serverSelectionTimeoutMS honored for connection handshake commands if it's lower than timeoutMS ``````````````````````````````````````````````````````````````````````````````````````````````` This test MUST only be run if the server version is 4.4 or higher and the URI has authentication fields (i.e. a username and password). #. Using ``internalClient``, set the following fail point: .. code:: javascript { configureFailPoint: failCommand, mode: { times: 1 }, data: { failCommands: ["saslContinue"], blockConnection: true, blockTimeMS: 15 } } #. Create a new MongoClient (referred to as ``client``) with ``timeoutMS=20`` and ``serverSelectionTimeoutMS=10``. #. Using ``client``, insert the document ``{ x: 1 }`` into collection ``db.coll``. - Expect this to fail with a timeout error after no more than 15ms. endSession ~~~~~~~~~~ This test MUST only be run against replica sets and sharded clusters with server version 4.4 or higher. It MUST be run three times: once with the timeout specified via the MongoClient ``timeoutMS`` option, once with the timeout specified via the ClientSession ``defaultTimeoutMS`` option, and once more with the timeout specified via the ``timeoutMS`` option for the ``endSession`` operation. In all cases, the timeout MUST be set to 10 milliseconds. #. Using ``internalClient``, drop the ``db.coll`` collection. #. Using ``internalClient``, set the following fail point: .. code:: javascript { configureFailPoint: failCommand, mode: { times: 1 }, data: { failCommands: ["abortTransaction"], blockConnection: true, blockTimeMS: 15 } } #. Create a new MongoClient (referred to as ``client``) and an explicit ClientSession derived from that MongoClient (referred to as ``session``). #. Execute the following code: .. code:: typescript coll = client.database("db").collection("coll") session.start_transaction() coll.insert_one({x: 1}, session=session) #. Using ``session``, execute ``session.end_session`` - Expect this to fail with a timeout error after no more than 15ms. Convenient Transactions ~~~~~~~~~~~~~~~~~~~~~~~ Tests in this section MUST only run against replica sets and sharded clusters with server versions 4.4 or higher. timeoutMS is refreshed for abortTransaction if the callback fails ````````````````````````````````````````````````````````````````` #. Using ``internalClient``, drop the ``db.coll`` collection. #. Using ``internalClient``, set the following fail point: .. code:: javascript { configureFailPoint: failCommand, mode: { times: 2 }, data: { failCommands: ["insert", "abortTransaction"], blockConnection: true, blockTimeMS: 15 } } #. Create a new MongoClient (referred to as ``client``) configured with ``timeoutMS=10`` and an explicit ClientSession derived from that MongoClient (referred to as ``session``). #. Using ``session``, execute a ``withTransaction`` operation with the following callback: .. code:: typescript def callback() { coll = client.database("db").collection("coll") coll.insert_one({ _id: 1 }, session=session) } #. Expect the previous ``withTransaction`` call to fail with a timeout error. #. Verify that the following events were published during the ``withTransaction`` call: #. ``command_started`` and ``command_failed`` events for an ``insert`` command. #. ``command_started`` and ``command_failed`` events for an ``abortTransaction`` command. Unit Tests ========== The tests enumerated in this section could not be expressed in either spec or prose format. Drivers SHOULD implement these if it is possible to do so using the driver's existing test infrastructure. - Operations should ignore ``waitQueueTimeoutMS`` if ``timeoutMS`` is also set. - If ``timeoutMS`` is set for an operation, the remaining ``timeoutMS`` value should apply to connection checkout after a server has been selected. - If ``timeoutMS`` is not set for an operation, ``waitQueueTimeoutMS`` should apply to connection checkout after a server has been selected. - If a new connection is required to execute an operation, ``min(remaining computedServerSelectionTimeout, connectTimeoutMS)`` should apply to socket establishment. - For drivers that have control over OCSP behavior, ``min(remaining computedServerSelectionTimeout, 5 seconds)`` should apply to HTTP requests against OCSP responders. - If ``timeoutMS`` is unset, operations fail after two non-consecutive socket timeouts. - The remaining ``timeoutMS`` value should apply to HTTP requests against KMS servers for CSFLE. - The remaining ``timeoutMS`` value should apply to commands sent to mongocryptd as part of automatic encryption. - When doing ``minPoolSize`` maintenance, ``connectTimeoutMS`` is used as the timeout for socket establishment.	22.42 KB	2025-05-25 12:27
📄 bulkWrite.json { "description": "timeoutMS behaves correctly for bulkWrite operations", "schemaVersion": "1.9", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "createEntities": [ { "client": { "id": "failPointClient", "useMultipleMongoses": false } }, { "client": { "id": "client", "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ], "initialData": [ { "collectionName": "coll", "databaseName": "test", "documents": [] } ], "tests": [ { "description": "timeoutMS applied to entire bulkWrite, not individual commands", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "insert", "update" ], "blockConnection": true, "blockTimeMS": 120 } } } }, { "name": "find", "object": "collection", "arguments": { "filter": { "_id": 1 } } }, { "name": "bulkWrite", "object": "collection", "arguments": { "requests": [ { "insertOne": { "document": { "_id": 1 } } }, { "replaceOne": { "filter": { "_id": 1 }, "replacement": { "x": 1 } } } ], "timeoutMS": 200 }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll" } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] } ] }	3.51 KB	2025-05-25 12:27
📄 bulkWrite.yml description: "timeoutMS behaves correctly for bulkWrite operations" schemaVersion: "1.9" runOnRequirements: - minServerVersion: "4.4" createEntities: - client: id: &failPointClient failPointClient useMultipleMongoses: false - client: id: &client client useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: &databaseName test - collection: id: &collection collection database: database collectionName: &collectionName coll initialData: - collectionName: collectionName databaseName: databaseName documents: [] tests: # Test that drivers do not refresh timeoutMS between commands. This is done by running a bulkWrite that will require # two commands with timeoutMS=200 and blocking each command for 120ms. The server should take over 200ms total, so the # bulkWrite should fail with a timeout error. - description: "timeoutMS applied to entire bulkWrite, not individual commands" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["insert", "update"] blockConnection: true blockTimeMS: 120 # Do an operation without a timeout to ensure the servers are discovered. - name: find object: collection arguments: filter: { _id : 1 } - name: bulkWrite object: collection arguments: requests: - insertOne: document: { _id: 1 } - replaceOne: filter: { _id: 1 } replacement: { x: 1 } timeoutMS: 200 expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$type: ["int", "long"] }	2.54 KB	2025-05-25 12:27
📄 error-transformations.json { "description": "MaxTimeMSExpired server errors are transformed into a custom timeout error", "schemaVersion": "1.9", "runOnRequirements": [ { "minServerVersion": "4.0", "topologies": [ "replicaset" ] }, { "minServerVersion": "4.2", "topologies": [ "replicaset", "sharded" ] } ], "createEntities": [ { "client": { "id": "failPointClient", "useMultipleMongoses": false } }, { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ], "initialData": [ { "collectionName": "coll", "databaseName": "test", "documents": [] } ], "tests": [ { "description": "basic MaxTimeMSExpired error is transformed", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "errorCode": 50 } } } }, { "name": "insertOne", "object": "collection", "arguments": { "document": { "_id": 1 } }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "write concern error MaxTimeMSExpired is transformed", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "writeConcernError": { "code": 50, "errmsg": "maxTimeMS expired" } } } } }, { "name": "insertOne", "object": "collection", "arguments": { "document": { "_id": 1 } }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] } ] }	3.9 KB	2025-05-25 12:27
📄 error-transformations.yml description: "MaxTimeMSExpired server errors are transformed into a custom timeout error" schemaVersion: "1.9" # failCommand is available on 4.0 for replica sets and 4.2 for sharded clusters. runOnRequirements: - minServerVersion: "4.0" topologies: ["replicaset"] - minServerVersion: "4.2" topologies: ["replicaset", "sharded"] createEntities: - client: id: &failPointClient failPointClient useMultipleMongoses: false - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: &databaseName test - collection: id: &collection collection database: database collectionName: &collectionName coll initialData: - collectionName: collectionName databaseName: databaseName documents: [] tests: # A server response like {ok: 0, code: 50, ...} is transformed. - description: "basic MaxTimeMSExpired error is transformed" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] errorCode: 50 - name: insertOne object: collection arguments: document: { _id: 1 } expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } # A server response like {ok: 1, writeConcernError: {code: 50, ...}} is transformed. - description: "write concern error MaxTimeMSExpired is transformed" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] writeConcernError: code: 50 errmsg: "maxTimeMS expired" - name: insertOne object: collection arguments: document: { _id: 1 } expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] }	2.72 KB	2025-05-25 12:27
📄 global-timeoutMS.json { "description": "timeoutMS can be configured on a MongoClient", "schemaVersion": "1.5", "runOnRequirements": [ { "minServerVersion": "4.4", "topologies": [ "replicaset", "sharded-replicaset" ] } ], "createEntities": [ { "client": { "id": "failPointClient", "useMultipleMongoses": false } } ], "initialData": [ { "collectionName": "coll", "databaseName": "test", "documents": [] } ], "tests": [ { "description": "timeoutMS can be configured on a MongoClient - listDatabases on client", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listDatabases" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "listDatabases", "object": "client", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - listDatabases on client", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listDatabases" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listDatabases", "object": "client", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - listDatabaseNames on client", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listDatabases" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "listDatabaseNames", "object": "client", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - listDatabaseNames on client", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listDatabases" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listDatabaseNames", "object": "client", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - createChangeStream on client", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "createChangeStream", "object": "client", "arguments": { "pipeline": [] }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "admin", "command": { "aggregate": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - createChangeStream on client", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "createChangeStream", "object": "client", "arguments": { "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "admin", "command": { "aggregate": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - aggregate on database", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "aggregate", "object": "database", "arguments": { "pipeline": [ { "$listLocalSessions": {} }, { "$limit": 1 } ] }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - aggregate on database", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "aggregate", "object": "database", "arguments": { "pipeline": [ { "$listLocalSessions": {} }, { "$limit": 1 } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - listCollections on database", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listCollections" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "listCollections", "object": "database", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - listCollections on database", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listCollections" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listCollections", "object": "database", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - listCollectionNames on database", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listCollections" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "listCollectionNames", "object": "database", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - listCollectionNames on database", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listCollections" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listCollectionNames", "object": "database", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - runCommand on database", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "ping" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "runCommand", "object": "database", "arguments": { "command": { "ping": 1 } }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "ping", "databaseName": "test", "command": { "ping": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - runCommand on database", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "ping" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "runCommand", "object": "database", "arguments": { "command": { "ping": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "ping", "databaseName": "test", "command": { "ping": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - createChangeStream on database", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "createChangeStream", "object": "database", "arguments": { "pipeline": [] }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - createChangeStream on database", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "createChangeStream", "object": "database", "arguments": { "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - aggregate on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "aggregate", "object": "collection", "arguments": { "pipeline": [] }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - aggregate on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "aggregate", "object": "collection", "arguments": { "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - count on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "count" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "count", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - count on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "count" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "count", "object": "collection", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - countDocuments on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "countDocuments", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - countDocuments on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "countDocuments", "object": "collection", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - estimatedDocumentCount on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "count" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "estimatedDocumentCount", "object": "collection", "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - estimatedDocumentCount on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "count" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "estimatedDocumentCount", "object": "collection" } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - distinct on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "distinct" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "distinct", "object": "collection", "arguments": { "fieldName": "x", "filter": {} }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "distinct", "databaseName": "test", "command": { "distinct": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - distinct on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "distinct" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "distinct", "object": "collection", "arguments": { "fieldName": "x", "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "distinct", "databaseName": "test", "command": { "distinct": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - find on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "find", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - find on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "find", "object": "collection", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - findOne on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "findOne", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - findOne on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "findOne", "object": "collection", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - listIndexes on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listIndexes" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "listIndexes", "object": "collection", "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - listIndexes on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listIndexes" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listIndexes", "object": "collection" } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - listIndexNames on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listIndexes" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "listIndexNames", "object": "collection", "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - listIndexNames on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listIndexes" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listIndexNames", "object": "collection" } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - createChangeStream on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "createChangeStream", "object": "collection", "arguments": { "pipeline": [] }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - createChangeStream on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "createChangeStream", "object": "collection", "arguments": { "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - insertOne on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "insertOne", "object": "collection", "arguments": { "document": { "x": 1 } }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - insertOne on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "insertOne", "object": "collection", "arguments": { "document": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - insertMany on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "insertMany", "object": "collection", "arguments": { "documents": [ { "x": 1 } ] }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - insertMany on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "insertMany", "object": "collection", "arguments": { "documents": [ { "x": 1 } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - deleteOne on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "delete" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "deleteOne", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - deleteOne on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "delete" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "deleteOne", "object": "collection", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - deleteMany on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "delete" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "deleteMany", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - deleteMany on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "delete" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "deleteMany", "object": "collection", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - replaceOne on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "replaceOne", "object": "collection", "arguments": { "filter": {}, "replacement": { "x": 1 } }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - replaceOne on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "replaceOne", "object": "collection", "arguments": { "filter": {}, "replacement": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - updateOne on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "updateOne", "object": "collection", "arguments": { "filter": {}, "update": { "$set": { "x": 1 } } }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - updateOne on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "updateOne", "object": "collection", "arguments": { "filter": {}, "update": { "$set": { "x": 1 } } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - updateMany on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "updateMany", "object": "collection", "arguments": { "filter": {}, "update": { "$set": { "x": 1 } } }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - updateMany on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "updateMany", "object": "collection", "arguments": { "filter": {}, "update": { "$set": { "x": 1 } } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - findOneAndDelete on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "findOneAndDelete", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - findOneAndDelete on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "findOneAndDelete", "object": "collection", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - findOneAndReplace on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "findOneAndReplace", "object": "collection", "arguments": { "filter": {}, "replacement": { "x": 1 } }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - findOneAndReplace on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "findOneAndReplace", "object": "collection", "arguments": { "filter": {}, "replacement": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - findOneAndUpdate on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "findOneAndUpdate", "object": "collection", "arguments": { "filter": {}, "update": { "$set": { "x": 1 } } }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - findOneAndUpdate on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "findOneAndUpdate", "object": "collection", "arguments": { "filter": {}, "update": { "$set": { "x": 1 } } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - bulkWrite on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "bulkWrite", "object": "collection", "arguments": { "requests": [ { "insertOne": { "document": { "_id": 1 } } } ] }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - bulkWrite on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "bulkWrite", "object": "collection", "arguments": { "requests": [ { "insertOne": { "document": { "_id": 1 } } } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - createIndex on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "createIndexes" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "createIndex", "object": "collection", "arguments": { "keys": { "x": 1 }, "name": "x_1" }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "createIndexes", "databaseName": "test", "command": { "createIndexes": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - createIndex on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "createIndexes" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "createIndex", "object": "collection", "arguments": { "keys": { "x": 1 }, "name": "x_1" } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "createIndexes", "databaseName": "test", "command": { "createIndexes": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - dropIndex on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "dropIndexes" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "dropIndex", "object": "collection", "arguments": { "name": "x_1" }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "dropIndexes", "databaseName": "test", "command": { "dropIndexes": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - dropIndex on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "dropIndexes" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "dropIndex", "object": "collection", "arguments": { "name": "x_1" }, "expectError": { "isClientError": false, "isTimeoutError": false } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "dropIndexes", "databaseName": "test", "command": { "dropIndexes": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured on a MongoClient - dropIndexes on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 50 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "dropIndexes" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "dropIndexes", "object": "collection", "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "dropIndexes", "databaseName": "test", "command": { "dropIndexes": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 on a MongoClient - dropIndexes on collection", "operations": [ { "name": "createEntities", "object": "testRunner", "arguments": { "entities": [ { "client": { "id": "client", "uriOptions": { "timeoutMS": 0 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ] } }, { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "dropIndexes" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "dropIndexes", "object": "collection" } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "dropIndexes", "databaseName": "test", "command": { "dropIndexes": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] } ] }	146.98 KB	2025-05-25 12:27
📄 global-timeoutMS.yml # Tests in this file are generated from global-timeoutMS.yml.template. description: "timeoutMS can be configured on a MongoClient" schemaVersion: "1.5" runOnRequirements: - minServerVersion: "4.4" topologies: ["replicaset", "sharded-replicaset"] createEntities: - client: id: &failPointClient failPointClient useMultipleMongoses: false initialData: - collectionName: &collectionName coll databaseName: &databaseName test documents: [] tests: # For each operation, we execute two tests: # # 1. timeoutMS can be configured to a non-zero value on a MongoClient and is inherited by the operation. Each test # constructs a client entity with timeoutMS=50 and configures a fail point to block the operation for 60ms so # execution results in a timeout error. # # 2. timeoutMS can be set to 0 for a MongoClient. Each test constructs a client entity with timeoutMS=0 and # configures a fail point to block the operation for 15ms. The tests expect the operation to succeed and the command # sent to not contain a maxTimeMS field. - description: "timeoutMS can be configured on a MongoClient - listDatabases on client" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listDatabases"] blockConnection: true blockTimeMS: 60 - name: listDatabases object: client arguments: filter: {} expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - listDatabases on client" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listDatabases"] blockConnection: true blockTimeMS: 15 - name: listDatabases object: client arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - listDatabaseNames on client" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listDatabases"] blockConnection: true blockTimeMS: 60 - name: listDatabaseNames object: client arguments: filter: {} expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - listDatabaseNames on client" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listDatabases"] blockConnection: true blockTimeMS: 15 - name: listDatabaseNames object: client arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - createChangeStream on client" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 60 - name: createChangeStream object: client arguments: pipeline: [] expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: admin command: aggregate: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - createChangeStream on client" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: createChangeStream object: client arguments: pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: admin command: aggregate: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - aggregate on database" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 60 - name: aggregate object: database arguments: pipeline: [ { $listLocalSessions: {} }, { $limit: 1 } ] expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - aggregate on database" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: aggregate object: database arguments: pipeline: [ { $listLocalSessions: {} }, { $limit: 1 } ] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - listCollections on database" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listCollections"] blockConnection: true blockTimeMS: 60 - name: listCollections object: database arguments: filter: {} expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - listCollections on database" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listCollections"] blockConnection: true blockTimeMS: 15 - name: listCollections object: database arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - listCollectionNames on database" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listCollections"] blockConnection: true blockTimeMS: 60 - name: listCollectionNames object: database arguments: filter: {} expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - listCollectionNames on database" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listCollections"] blockConnection: true blockTimeMS: 15 - name: listCollectionNames object: database arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - runCommand on database" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["ping"] blockConnection: true blockTimeMS: 60 - name: runCommand object: database arguments: command: { ping: 1 } expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: ping databaseName: databaseName command: ping: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - runCommand on database" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["ping"] blockConnection: true blockTimeMS: 15 - name: runCommand object: database arguments: command: { ping: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: ping databaseName: databaseName command: ping: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - createChangeStream on database" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 60 - name: createChangeStream object: database arguments: pipeline: [] expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - createChangeStream on database" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: createChangeStream object: database arguments: pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - aggregate on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 60 - name: aggregate object: collection arguments: pipeline: [] expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - aggregate on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: aggregate object: collection arguments: pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - count on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["count"] blockConnection: true blockTimeMS: 60 - name: count object: collection arguments: filter: {} expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - count on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["count"] blockConnection: true blockTimeMS: 15 - name: count object: collection arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - countDocuments on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 60 - name: countDocuments object: collection arguments: filter: {} expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - countDocuments on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: countDocuments object: collection arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - estimatedDocumentCount on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["count"] blockConnection: true blockTimeMS: 60 - name: estimatedDocumentCount object: collection expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - estimatedDocumentCount on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["count"] blockConnection: true blockTimeMS: 15 - name: estimatedDocumentCount object: collection expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - distinct on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["distinct"] blockConnection: true blockTimeMS: 60 - name: distinct object: collection arguments: fieldName: x filter: {} expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: distinct databaseName: databaseName command: distinct: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - distinct on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["distinct"] blockConnection: true blockTimeMS: 15 - name: distinct object: collection arguments: fieldName: x filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: distinct databaseName: databaseName command: distinct: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - find on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 60 - name: find object: collection arguments: filter: {} expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - find on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 15 - name: find object: collection arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - findOne on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 60 - name: findOne object: collection arguments: filter: {} expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - findOne on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 15 - name: findOne object: collection arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - listIndexes on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listIndexes"] blockConnection: true blockTimeMS: 60 - name: listIndexes object: collection expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - listIndexes on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listIndexes"] blockConnection: true blockTimeMS: 15 - name: listIndexes object: collection expectEvents: - client: client events: - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - listIndexNames on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listIndexes"] blockConnection: true blockTimeMS: 60 - name: listIndexNames object: collection expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - listIndexNames on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listIndexes"] blockConnection: true blockTimeMS: 15 - name: listIndexNames object: collection expectEvents: - client: client events: - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - createChangeStream on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 60 - name: createChangeStream object: collection arguments: pipeline: [] expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - createChangeStream on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: createChangeStream object: collection arguments: pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - insertOne on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 60 - name: insertOne object: collection arguments: document: { x: 1 } expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - insertOne on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 15 - name: insertOne object: collection arguments: document: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - insertMany on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 60 - name: insertMany object: collection arguments: documents: - { x: 1 } expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - insertMany on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 15 - name: insertMany object: collection arguments: documents: - { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - deleteOne on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["delete"] blockConnection: true blockTimeMS: 60 - name: deleteOne object: collection arguments: filter: {} expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - deleteOne on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["delete"] blockConnection: true blockTimeMS: 15 - name: deleteOne object: collection arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - deleteMany on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["delete"] blockConnection: true blockTimeMS: 60 - name: deleteMany object: collection arguments: filter: {} expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - deleteMany on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["delete"] blockConnection: true blockTimeMS: 15 - name: deleteMany object: collection arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - replaceOne on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 60 - name: replaceOne object: collection arguments: filter: {} replacement: { x: 1 } expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - replaceOne on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 15 - name: replaceOne object: collection arguments: filter: {} replacement: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - updateOne on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 60 - name: updateOne object: collection arguments: filter: {} update: { $set: { x: 1 } } expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - updateOne on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 15 - name: updateOne object: collection arguments: filter: {} update: { $set: { x: 1 } } expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - updateMany on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 60 - name: updateMany object: collection arguments: filter: {} update: { $set: { x: 1 } } expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - updateMany on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 15 - name: updateMany object: collection arguments: filter: {} update: { $set: { x: 1 } } expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - findOneAndDelete on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 60 - name: findOneAndDelete object: collection arguments: filter: {} expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - findOneAndDelete on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 15 - name: findOneAndDelete object: collection arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - findOneAndReplace on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 60 - name: findOneAndReplace object: collection arguments: filter: {} replacement: { x: 1 } expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - findOneAndReplace on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 15 - name: findOneAndReplace object: collection arguments: filter: {} replacement: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - findOneAndUpdate on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 60 - name: findOneAndUpdate object: collection arguments: filter: {} update: { $set: { x: 1 } } expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - findOneAndUpdate on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 15 - name: findOneAndUpdate object: collection arguments: filter: {} update: { $set: { x: 1 } } expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - bulkWrite on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 60 - name: bulkWrite object: collection arguments: requests: - insertOne: document: { _id: 1 } expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - bulkWrite on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 15 - name: bulkWrite object: collection arguments: requests: - insertOne: document: { _id: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - createIndex on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["createIndexes"] blockConnection: true blockTimeMS: 60 - name: createIndex object: collection arguments: keys: { x: 1 } name: "x_1" expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: createIndexes databaseName: databaseName command: createIndexes: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - createIndex on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["createIndexes"] blockConnection: true blockTimeMS: 15 - name: createIndex object: collection arguments: keys: { x: 1 } name: "x_1" expectEvents: - client: client events: - commandStartedEvent: commandName: createIndexes databaseName: databaseName command: createIndexes: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - dropIndex on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["dropIndexes"] blockConnection: true blockTimeMS: 60 - name: dropIndex object: collection arguments: name: "x_1" expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: dropIndexes databaseName: databaseName command: dropIndexes: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - dropIndex on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["dropIndexes"] blockConnection: true blockTimeMS: 15 - name: dropIndex object: collection arguments: name: "x_1" expectError: isClientError: false isTimeoutError: false expectEvents: - client: client events: - commandStartedEvent: commandName: dropIndexes databaseName: databaseName command: dropIndexes: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured on a MongoClient - dropIndexes on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 50 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["dropIndexes"] blockConnection: true blockTimeMS: 60 - name: dropIndexes object: collection expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: dropIndexes databaseName: databaseName command: dropIndexes: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 on a MongoClient - dropIndexes on collection" operations: - name: createEntities object: testRunner arguments: entities: - client: id: &client client uriOptions: timeoutMS: 0 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: databaseName - collection: id: &collection collection database: database collectionName: collectionName - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["dropIndexes"] blockConnection: true blockTimeMS: 15 - name: dropIndexes object: collection expectEvents: - client: client events: - commandStartedEvent: commandName: dropIndexes databaseName: databaseName command: dropIndexes: collectionName maxTimeMS: { $$exists: false }	95.9 KB	2025-05-25 12:27
📄 gridfs-advanced.json { "description": "timeoutMS behaves correctly for advanced GridFS API operations", "schemaVersion": "1.9", "runOnRequirements": [ { "minServerVersion": "4.4", "serverless": "forbid" } ], "createEntities": [ { "client": { "id": "failPointClient", "useMultipleMongoses": false } }, { "client": { "id": "client", "uriOptions": { "timeoutMS": 75 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "bucket": { "id": "bucket", "database": "database" } }, { "collection": { "id": "filesCollection", "database": "database", "collectionName": "fs.files" } }, { "collection": { "id": "chunksCollection", "database": "database", "collectionName": "fs.chunks" } } ], "initialData": [ { "collectionName": "fs.files", "databaseName": "test", "documents": [ { "_id": { "$oid": "000000000000000000000005" }, "length": 8, "chunkSize": 4, "uploadDate": { "$date": "1970-01-01T00:00:00.000Z" }, "filename": "length-8", "contentType": "application/octet-stream", "aliases": [], "metadata": {} } ] }, { "collectionName": "fs.chunks", "databaseName": "test", "documents": [ { "_id": { "$oid": "000000000000000000000005" }, "files_id": { "$oid": "000000000000000000000005" }, "n": 0, "data": { "$binary": { "base64": "ESIzRA==", "subType": "00" } } }, { "_id": { "$oid": "000000000000000000000006" }, "files_id": { "$oid": "000000000000000000000005" }, "n": 1, "data": { "$binary": { "base64": "ESIzRA==", "subType": "00" } } } ] } ], "tests": [ { "description": "timeoutMS can be overridden for a rename", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 100 } } } }, { "name": "rename", "object": "bucket", "arguments": { "id": { "$oid": "000000000000000000000005" }, "newFilename": "foo", "timeoutMS": 2000 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "fs.files", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS applied to update during a rename", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 100 } } } }, { "name": "rename", "object": "bucket", "arguments": { "id": { "$oid": "000000000000000000000005" }, "newFilename": "foo" }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "fs.files", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be overridden for drop", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "drop" ], "blockConnection": true, "blockTimeMS": 100 } } } }, { "name": "drop", "object": "bucket", "arguments": { "timeoutMS": 2000 } } ] }, { "description": "timeoutMS applied to files collection drop", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "drop" ], "blockConnection": true, "blockTimeMS": 100 } } } }, { "name": "drop", "object": "bucket", "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "drop", "databaseName": "test", "command": { "drop": "fs.files", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS applied to chunks collection drop", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "skip": 1 }, "data": { "failCommands": [ "drop" ], "blockConnection": true, "blockTimeMS": 100 } } } }, { "name": "drop", "object": "bucket", "expectError": { "isTimeoutError": true } } ] }, { "description": "timeoutMS applied to drop as a whole, not individual parts", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "drop" ], "blockConnection": true, "blockTimeMS": 50 } } } }, { "name": "drop", "object": "bucket", "expectError": { "isTimeoutError": true } } ] } ] }	8.73 KB	2025-05-25 12:27
📄 gridfs-advanced.yml description: "timeoutMS behaves correctly for advanced GridFS API operations" schemaVersion: "1.9" runOnRequirements: - minServerVersion: "4.4" serverless: forbid # GridFS ops can be slow on serverless. createEntities: - client: id: &failPointClient failPointClient useMultipleMongoses: false - client: id: &client client uriOptions: timeoutMS: 75 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: &databaseName test - bucket: id: &bucket bucket database: database - collection: id: &filesCollection filesCollection database: database collectionName: &filesCollectionName fs.files - collection: id: &chunksCollection chunksCollection database: database collectionName: &chunksCollectionName fs.chunks initialData: - collectionName: filesCollectionName databaseName: databaseName documents: - _id: &fileDocumentId { $oid: "000000000000000000000005" } length: 8 chunkSize: 4 uploadDate: { $date: "1970-01-01T00:00:00.000Z" } filename: "length-8" contentType: "application/octet-stream" aliases: [] metadata: {} - collectionName: chunksCollectionName databaseName: databaseName documents: - _id: { $oid: "000000000000000000000005" } files_id: fileDocumentId n: 0 data: { $binary: { base64: "ESIzRA==", subType: "00" } } # hex: 11223344 - _id: { $oid: "000000000000000000000006" } files_id: fileDocumentId n: 1 data: { $binary: { base64: "ESIzRA==", subType: "00" } } # hex: 11223344 tests: # Tests for the "rename" operation. - description: "timeoutMS can be overridden for a rename" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 100 - name: rename object: bucket arguments: id: fileDocumentId newFilename: "foo" timeoutMS: 2000 # The client timeoutMS is 75ms and the operation blocks for 100ms, so 2000ms should let it succeed. expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: filesCollectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS applied to update during a rename" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 100 - name: rename object: bucket arguments: id: fileDocumentId newFilename: "foo" expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: filesCollectionName maxTimeMS: { $$type: ["int", "long"] } # Tests for the "drop" opration. Any tests that might result in multiple commands being sent do not have expectEvents # assertions as these assertions reduce test robustness and can cause flaky failures. - description: "timeoutMS can be overridden for drop" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["drop"] blockConnection: true blockTimeMS: 100 - name: drop object: bucket arguments: timeoutMS: 2000 # The client timeoutMS is 75ms and the operation blocks for 100ms, so 2000ms should let it succeed. - description: "timeoutMS applied to files collection drop" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["drop"] blockConnection: true blockTimeMS: 100 - name: drop object: bucket expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: drop databaseName: databaseName command: drop: filesCollectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS applied to chunks collection drop" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: # Skip the drop for the files collection. skip: 1 data: failCommands: ["drop"] blockConnection: true blockTimeMS: 100 - name: drop object: bucket expectError: isTimeoutError: true - description: "timeoutMS applied to drop as a whole, not individual parts" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["drop"] blockConnection: true blockTimeMS: 50 - name: drop object: *bucket expectError: isTimeoutError: true	6.12 KB	2025-05-25 12:27
📄 gridfs-delete.json { "description": "timeoutMS behaves correctly for GridFS delete operations", "schemaVersion": "1.9", "runOnRequirements": [ { "minServerVersion": "4.4", "serverless": "forbid" } ], "createEntities": [ { "client": { "id": "failPointClient", "useMultipleMongoses": false } }, { "client": { "id": "client", "uriOptions": { "timeoutMS": 75 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "bucket": { "id": "bucket", "database": "database" } }, { "collection": { "id": "filesCollection", "database": "database", "collectionName": "fs.files" } }, { "collection": { "id": "chunksCollection", "database": "database", "collectionName": "fs.chunks" } } ], "initialData": [ { "collectionName": "fs.files", "databaseName": "test", "documents": [ { "_id": { "$oid": "000000000000000000000005" }, "length": 8, "chunkSize": 4, "uploadDate": { "$date": "1970-01-01T00:00:00.000Z" }, "filename": "length-8", "contentType": "application/octet-stream", "aliases": [], "metadata": {} } ] }, { "collectionName": "fs.chunks", "databaseName": "test", "documents": [ { "_id": { "$oid": "000000000000000000000005" }, "files_id": { "$oid": "000000000000000000000005" }, "n": 0, "data": { "$binary": { "base64": "ESIzRA==", "subType": "00" } } }, { "_id": { "$oid": "000000000000000000000006" }, "files_id": { "$oid": "000000000000000000000005" }, "n": 1, "data": { "$binary": { "base64": "ESIzRA==", "subType": "00" } } } ] } ], "tests": [ { "description": "timeoutMS can be overridden for delete", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "delete" ], "blockConnection": true, "blockTimeMS": 100 } } } }, { "name": "delete", "object": "bucket", "arguments": { "id": { "$oid": "000000000000000000000005" }, "timeoutMS": 1000 } } ] }, { "description": "timeoutMS applied to delete against the files collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "delete" ], "blockConnection": true, "blockTimeMS": 100 } } } }, { "name": "delete", "object": "bucket", "arguments": { "id": { "$oid": "000000000000000000000005" } }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "fs.files", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS applied to delete against the chunks collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "skip": 1 }, "data": { "failCommands": [ "delete" ], "blockConnection": true, "blockTimeMS": 100 } } } }, { "name": "delete", "object": "bucket", "arguments": { "id": { "$oid": "000000000000000000000005" } }, "expectError": { "isTimeoutError": true } } ] }, { "description": "timeoutMS applied to entire delete, not individual parts", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "delete" ], "blockConnection": true, "blockTimeMS": 50 } } } }, { "name": "delete", "object": "bucket", "arguments": { "id": { "$oid": "000000000000000000000005" } }, "expectError": { "isTimeoutError": true } } ] } ] }	6.38 KB	2025-05-25 12:27
📄 gridfs-delete.yml description: "timeoutMS behaves correctly for GridFS delete operations" schemaVersion: "1.9" runOnRequirements: - minServerVersion: "4.4" serverless: forbid # GridFS ops can be slow on serverless. createEntities: - client: id: &failPointClient failPointClient useMultipleMongoses: false - client: id: &client client uriOptions: timeoutMS: 75 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: &databaseName test - bucket: id: &bucket bucket database: database - collection: id: &filesCollection filesCollection database: database collectionName: &filesCollectionName fs.files - collection: id: &chunksCollection chunksCollection database: database collectionName: &chunksCollectionName fs.chunks initialData: - collectionName: filesCollectionName databaseName: databaseName documents: - _id: &fileDocumentId { $oid: "000000000000000000000005" } length: 8 chunkSize: 4 uploadDate: { $date: "1970-01-01T00:00:00.000Z" } filename: "length-8" contentType: "application/octet-stream" aliases: [] metadata: {} - collectionName: chunksCollectionName databaseName: databaseName documents: - _id: { $oid: "000000000000000000000005" } files_id: fileDocumentId n: 0 data: { $binary: { base64: "ESIzRA==", subType: "00" } } # hex: 11223344 - _id: { $oid: "000000000000000000000006" } files_id: fileDocumentId n: 1 data: { $binary: { base64: "ESIzRA==", subType: "00" } } # hex: 11223344 tests: - description: "timeoutMS can be overridden for delete" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["delete"] blockConnection: true blockTimeMS: 100 - name: delete object: bucket arguments: id: fileDocumentId timeoutMS: 1000 # The client timeoutMS is 75ms and the operation blocks for 100ms, so 1000ms should let it succeed. - description: "timeoutMS applied to delete against the files collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["delete"] blockConnection: true blockTimeMS: 100 - name: delete object: bucket arguments: id: fileDocumentId expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: filesCollectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS applied to delete against the chunks collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: # The first "delete" will be against the files collection, so we skip it. skip: 1 data: failCommands: ["delete"] blockConnection: true blockTimeMS: 100 - name: delete object: bucket arguments: id: fileDocumentId expectError: isTimeoutError: true # Test that drivers are not refreshing the timeout between commands. We test this by blocking both "delete" commands # for 50ms each. The delete should inherit timeoutMS=75 from the client/database and the server takes over 75ms # total, so the operation should fail. - description: "timeoutMS applied to entire delete, not individual parts" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["delete"] blockConnection: true blockTimeMS: 50 - name: delete object: bucket arguments: id: *fileDocumentId expectError: isTimeoutError: true	4.62 KB	2025-05-25 12:27
📄 gridfs-find.json { "description": "timeoutMS behaves correctly for GridFS find operations", "schemaVersion": "1.9", "runOnRequirements": [ { "minServerVersion": "4.4", "serverless": "forbid" } ], "createEntities": [ { "client": { "id": "failPointClient", "useMultipleMongoses": false } }, { "client": { "id": "client", "uriOptions": { "timeoutMS": 75 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "bucket": { "id": "bucket", "database": "database" } }, { "collection": { "id": "filesCollection", "database": "database", "collectionName": "fs.files" } }, { "collection": { "id": "chunksCollection", "database": "database", "collectionName": "fs.chunks" } } ], "initialData": [ { "collectionName": "fs.files", "databaseName": "test", "documents": [] }, { "collectionName": "fs.chunks", "databaseName": "test", "documents": [] } ], "tests": [ { "description": "timeoutMS can be overridden for a find", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 100 } } } }, { "name": "find", "object": "bucket", "arguments": { "filter": {}, "timeoutMS": 1000 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "fs.files", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS applied to find command", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 100 } } } }, { "name": "find", "object": "bucket", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "fs.files", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] } ] }	3.92 KB	2025-05-25 12:27
📄 gridfs-find.yml description: "timeoutMS behaves correctly for GridFS find operations" schemaVersion: "1.9" runOnRequirements: - minServerVersion: "4.4" serverless: forbid # GridFS ops can be slow on serverless. createEntities: - client: id: &failPointClient failPointClient useMultipleMongoses: false - client: id: &client client uriOptions: timeoutMS: 75 useMultipleMongoses: false observeEvents: - commandStartedEvent - database: id: &database database client: client databaseName: &databaseName test - bucket: id: &bucket bucket database: database - collection: id: &filesCollection filesCollection database: database collectionName: &filesCollectionName fs.files - collection: id: &chunksCollection chunksCollection database: database collectionName: &chunksCollectionName fs.chunks initialData: - collectionName: filesCollectionName databaseName: databaseName documents: [] - collectionName: chunksCollectionName databaseName: databaseName documents: [] tests: - description: "timeoutMS can be overridden for a find" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 100 - name: find object: bucket arguments: filter: {} timeoutMS: 1000 # The client timeoutMS is 75ms and the operation blocks for 100ms, so 1000ms should let it succeed. expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: filesCollectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS applied to find command" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 100 - name: find object: bucket arguments: filter: {} expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: filesCollectionName maxTimeMS: { $$type: ["int", "long"] }	2.76 KB	2025-05-25 12:27
📄 override-operation-timeoutMS.json { "description": "timeoutMS can be overridden for an operation", "schemaVersion": "1.9", "runOnRequirements": [ { "minServerVersion": "4.4", "topologies": [ "replicaset", "sharded-replicaset" ] } ], "createEntities": [ { "client": { "id": "failPointClient", "useMultipleMongoses": false } }, { "client": { "id": "client", "uriOptions": { "timeoutMS": 10 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ], "initialData": [ { "collectionName": "coll", "databaseName": "test", "documents": [] } ], "tests": [ { "description": "timeoutMS can be configured for an operation - listDatabases on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listDatabases" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listDatabases", "object": "client", "arguments": { "timeoutMS": 1000, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - listDatabases on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listDatabases" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listDatabases", "object": "client", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - listDatabaseNames on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listDatabases" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listDatabaseNames", "object": "client", "arguments": { "timeoutMS": 1000 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - listDatabaseNames on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listDatabases" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listDatabaseNames", "object": "client", "arguments": { "timeoutMS": 0 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - createChangeStream on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "createChangeStream", "object": "client", "arguments": { "timeoutMS": 1000, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "admin", "command": { "aggregate": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - createChangeStream on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "createChangeStream", "object": "client", "arguments": { "timeoutMS": 0, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "admin", "command": { "aggregate": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - aggregate on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "aggregate", "object": "database", "arguments": { "timeoutMS": 1000, "pipeline": [ { "$listLocalSessions": {} }, { "$limit": 1 } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - aggregate on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "aggregate", "object": "database", "arguments": { "timeoutMS": 0, "pipeline": [ { "$listLocalSessions": {} }, { "$limit": 1 } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - listCollections on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listCollections" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listCollections", "object": "database", "arguments": { "timeoutMS": 1000, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - listCollections on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listCollections" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listCollections", "object": "database", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - listCollectionNames on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listCollections" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listCollectionNames", "object": "database", "arguments": { "timeoutMS": 1000, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - listCollectionNames on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listCollections" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listCollectionNames", "object": "database", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - runCommand on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "ping" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "runCommand", "object": "database", "arguments": { "timeoutMS": 1000, "command": { "ping": 1 }, "commandName": "ping" } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "ping", "databaseName": "test", "command": { "ping": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - runCommand on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "ping" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "runCommand", "object": "database", "arguments": { "timeoutMS": 0, "command": { "ping": 1 }, "commandName": "ping" } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "ping", "databaseName": "test", "command": { "ping": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - createChangeStream on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "createChangeStream", "object": "database", "arguments": { "timeoutMS": 1000, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - createChangeStream on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "createChangeStream", "object": "database", "arguments": { "timeoutMS": 0, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - aggregate on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "aggregate", "object": "collection", "arguments": { "timeoutMS": 1000, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - aggregate on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "aggregate", "object": "collection", "arguments": { "timeoutMS": 0, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - count on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "count" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "count", "object": "collection", "arguments": { "timeoutMS": 1000, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - count on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "count" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "count", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - countDocuments on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "countDocuments", "object": "collection", "arguments": { "timeoutMS": 1000, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - countDocuments on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "countDocuments", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - estimatedDocumentCount on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "count" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "estimatedDocumentCount", "object": "collection", "arguments": { "timeoutMS": 1000 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - estimatedDocumentCount on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "count" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "estimatedDocumentCount", "object": "collection", "arguments": { "timeoutMS": 0 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - distinct on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "distinct" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "distinct", "object": "collection", "arguments": { "timeoutMS": 1000, "fieldName": "x", "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "distinct", "databaseName": "test", "command": { "distinct": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - distinct on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "distinct" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "distinct", "object": "collection", "arguments": { "timeoutMS": 0, "fieldName": "x", "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "distinct", "databaseName": "test", "command": { "distinct": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - find on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "find", "object": "collection", "arguments": { "timeoutMS": 1000, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - find on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "find", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - findOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "findOne", "object": "collection", "arguments": { "timeoutMS": 1000, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - findOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "findOne", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - listIndexes on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listIndexes" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listIndexes", "object": "collection", "arguments": { "timeoutMS": 1000 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - listIndexes on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listIndexes" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listIndexes", "object": "collection", "arguments": { "timeoutMS": 0 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - listIndexNames on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listIndexes" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listIndexNames", "object": "collection", "arguments": { "timeoutMS": 1000 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - listIndexNames on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listIndexes" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "listIndexNames", "object": "collection", "arguments": { "timeoutMS": 0 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - createChangeStream on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "createChangeStream", "object": "collection", "arguments": { "timeoutMS": 1000, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - createChangeStream on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "createChangeStream", "object": "collection", "arguments": { "timeoutMS": 0, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - insertOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "insertOne", "object": "collection", "arguments": { "timeoutMS": 1000, "document": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - insertOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "insertOne", "object": "collection", "arguments": { "timeoutMS": 0, "document": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - insertMany on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "insertMany", "object": "collection", "arguments": { "timeoutMS": 1000, "documents": [ { "x": 1 } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - insertMany on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "insertMany", "object": "collection", "arguments": { "timeoutMS": 0, "documents": [ { "x": 1 } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - deleteOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "delete" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "deleteOne", "object": "collection", "arguments": { "timeoutMS": 1000, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - deleteOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "delete" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "deleteOne", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - deleteMany on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "delete" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "deleteMany", "object": "collection", "arguments": { "timeoutMS": 1000, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - deleteMany on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "delete" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "deleteMany", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - replaceOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "replaceOne", "object": "collection", "arguments": { "timeoutMS": 1000, "filter": {}, "replacement": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - replaceOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "replaceOne", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {}, "replacement": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - updateOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "updateOne", "object": "collection", "arguments": { "timeoutMS": 1000, "filter": {}, "update": { "$set": { "x": 1 } } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - updateOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "updateOne", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {}, "update": { "$set": { "x": 1 } } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - updateMany on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "updateMany", "object": "collection", "arguments": { "timeoutMS": 1000, "filter": {}, "update": { "$set": { "x": 1 } } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - updateMany on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "updateMany", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {}, "update": { "$set": { "x": 1 } } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - findOneAndDelete on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "findOneAndDelete", "object": "collection", "arguments": { "timeoutMS": 1000, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - findOneAndDelete on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "findOneAndDelete", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - findOneAndReplace on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "findOneAndReplace", "object": "collection", "arguments": { "timeoutMS": 1000, "filter": {}, "replacement": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - findOneAndReplace on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "findOneAndReplace", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {}, "replacement": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - findOneAndUpdate on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "findOneAndUpdate", "object": "collection", "arguments": { "timeoutMS": 1000, "filter": {}, "update": { "$set": { "x": 1 } } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - findOneAndUpdate on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "findOneAndUpdate", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {}, "update": { "$set": { "x": 1 } } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - bulkWrite on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "bulkWrite", "object": "collection", "arguments": { "timeoutMS": 1000, "requests": [ { "insertOne": { "document": { "_id": 1 } } } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - bulkWrite on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "bulkWrite", "object": "collection", "arguments": { "timeoutMS": 0, "requests": [ { "insertOne": { "document": { "_id": 1 } } } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - createIndex on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "createIndexes" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "createIndex", "object": "collection", "arguments": { "timeoutMS": 1000, "keys": { "x": 1 }, "name": "x_1" } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "createIndexes", "databaseName": "test", "command": { "createIndexes": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - createIndex on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "createIndexes" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "createIndex", "object": "collection", "arguments": { "timeoutMS": 0, "keys": { "x": 1 }, "name": "x_1" } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "createIndexes", "databaseName": "test", "command": { "createIndexes": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - dropIndex on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "dropIndexes" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "dropIndex", "object": "collection", "arguments": { "timeoutMS": 1000, "name": "x_1" }, "expectError": { "isTimeoutError": false } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "dropIndexes", "databaseName": "test", "command": { "dropIndexes": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - dropIndex on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "dropIndexes" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "dropIndex", "object": "collection", "arguments": { "timeoutMS": 0, "name": "x_1" }, "expectError": { "isTimeoutError": false } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "dropIndexes", "databaseName": "test", "command": { "dropIndexes": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS can be configured for an operation - dropIndexes on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "dropIndexes" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "dropIndexes", "object": "collection", "arguments": { "timeoutMS": 1000 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "dropIndexes", "databaseName": "test", "command": { "dropIndexes": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "timeoutMS can be set to 0 for an operation - dropIndexes on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "dropIndexes" ], "blockConnection": true, "blockTimeMS": 15 } } } }, { "name": "dropIndexes", "object": "collection", "arguments": { "timeoutMS": 0 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "dropIndexes", "databaseName": "test", "command": { "dropIndexes": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] } ] }	86.54 KB	2025-05-25 12:27
📄 override-operation-timeoutMS.yml # Tests in this file are generated from override-operation-timeoutMS.yml.template. description: "timeoutMS can be overridden for an operation" schemaVersion: "1.9" runOnRequirements: - minServerVersion: "4.4" topologies: ["replicaset", "sharded-replicaset"] createEntities: - client: id: &failPointClient failPointClient useMultipleMongoses: false - client: id: &client client uriOptions: timeoutMS: 10 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: &databaseName test - collection: id: &collection collection database: database collectionName: &collectionName coll initialData: - collectionName: collectionName databaseName: databaseName documents: [] tests: # For each level operation, we execute two tests: # # 1. timeoutMS can be overridden to a non-zero value for an operation. Each test executes an operation using one of # the entities defined above with an overridden timeoutMS=1000 and configures a fail point to block the operation for # 15ms so the operation succeeds. # # 2. timeoutMS can be overridden to 0 for an operation. Each test executes an operation using the entities defined # above with an overridden timeoutMS=0 so the operation succeeds. - description: "timeoutMS can be configured for an operation - listDatabases on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listDatabases"] blockConnection: true blockTimeMS: 15 - name: listDatabases object: client arguments: timeoutMS: 1000 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - listDatabases on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listDatabases"] blockConnection: true blockTimeMS: 15 - name: listDatabases object: client arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - listDatabaseNames on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listDatabases"] blockConnection: true blockTimeMS: 15 - name: listDatabaseNames object: client arguments: timeoutMS: 1000 expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - listDatabaseNames on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listDatabases"] blockConnection: true blockTimeMS: 15 - name: listDatabaseNames object: client arguments: timeoutMS: 0 expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - createChangeStream on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: createChangeStream object: client arguments: timeoutMS: 1000 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: admin command: aggregate: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - createChangeStream on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: createChangeStream object: client arguments: timeoutMS: 0 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: admin command: aggregate: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - aggregate on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: aggregate object: database arguments: timeoutMS: 1000 pipeline: [ { $listLocalSessions: {} }, { $limit: 1 } ] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - aggregate on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: aggregate object: database arguments: timeoutMS: 0 pipeline: [ { $listLocalSessions: {} }, { $limit: 1 } ] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - listCollections on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listCollections"] blockConnection: true blockTimeMS: 15 - name: listCollections object: database arguments: timeoutMS: 1000 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - listCollections on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listCollections"] blockConnection: true blockTimeMS: 15 - name: listCollections object: database arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - listCollectionNames on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listCollections"] blockConnection: true blockTimeMS: 15 - name: listCollectionNames object: database arguments: timeoutMS: 1000 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - listCollectionNames on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listCollections"] blockConnection: true blockTimeMS: 15 - name: listCollectionNames object: database arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - runCommand on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["ping"] blockConnection: true blockTimeMS: 15 - name: runCommand object: database arguments: timeoutMS: 1000 command: { ping: 1 } commandName: ping expectEvents: - client: client events: - commandStartedEvent: commandName: ping databaseName: databaseName command: ping: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - runCommand on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["ping"] blockConnection: true blockTimeMS: 15 - name: runCommand object: database arguments: timeoutMS: 0 command: { ping: 1 } commandName: ping expectEvents: - client: client events: - commandStartedEvent: commandName: ping databaseName: databaseName command: ping: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - createChangeStream on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: createChangeStream object: database arguments: timeoutMS: 1000 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - createChangeStream on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: createChangeStream object: database arguments: timeoutMS: 0 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - aggregate on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: aggregate object: collection arguments: timeoutMS: 1000 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - aggregate on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: aggregate object: collection arguments: timeoutMS: 0 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - count on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["count"] blockConnection: true blockTimeMS: 15 - name: count object: collection arguments: timeoutMS: 1000 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - count on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["count"] blockConnection: true blockTimeMS: 15 - name: count object: collection arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - countDocuments on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: countDocuments object: collection arguments: timeoutMS: 1000 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - countDocuments on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: countDocuments object: collection arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - estimatedDocumentCount on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["count"] blockConnection: true blockTimeMS: 15 - name: estimatedDocumentCount object: collection arguments: timeoutMS: 1000 expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - estimatedDocumentCount on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["count"] blockConnection: true blockTimeMS: 15 - name: estimatedDocumentCount object: collection arguments: timeoutMS: 0 expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - distinct on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["distinct"] blockConnection: true blockTimeMS: 15 - name: distinct object: collection arguments: timeoutMS: 1000 fieldName: x filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: distinct databaseName: databaseName command: distinct: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - distinct on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["distinct"] blockConnection: true blockTimeMS: 15 - name: distinct object: collection arguments: timeoutMS: 0 fieldName: x filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: distinct databaseName: databaseName command: distinct: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - find on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 15 - name: find object: collection arguments: timeoutMS: 1000 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - find on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 15 - name: find object: collection arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - findOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 15 - name: findOne object: collection arguments: timeoutMS: 1000 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - findOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 15 - name: findOne object: collection arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - listIndexes on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listIndexes"] blockConnection: true blockTimeMS: 15 - name: listIndexes object: collection arguments: timeoutMS: 1000 expectEvents: - client: client events: - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - listIndexes on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listIndexes"] blockConnection: true blockTimeMS: 15 - name: listIndexes object: collection arguments: timeoutMS: 0 expectEvents: - client: client events: - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - listIndexNames on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listIndexes"] blockConnection: true blockTimeMS: 15 - name: listIndexNames object: collection arguments: timeoutMS: 1000 expectEvents: - client: client events: - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - listIndexNames on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listIndexes"] blockConnection: true blockTimeMS: 15 - name: listIndexNames object: collection arguments: timeoutMS: 0 expectEvents: - client: client events: - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - createChangeStream on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: createChangeStream object: collection arguments: timeoutMS: 1000 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - createChangeStream on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 15 - name: createChangeStream object: collection arguments: timeoutMS: 0 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - insertOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 15 - name: insertOne object: collection arguments: timeoutMS: 1000 document: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - insertOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 15 - name: insertOne object: collection arguments: timeoutMS: 0 document: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - insertMany on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 15 - name: insertMany object: collection arguments: timeoutMS: 1000 documents: - { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - insertMany on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 15 - name: insertMany object: collection arguments: timeoutMS: 0 documents: - { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - deleteOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["delete"] blockConnection: true blockTimeMS: 15 - name: deleteOne object: collection arguments: timeoutMS: 1000 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - deleteOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["delete"] blockConnection: true blockTimeMS: 15 - name: deleteOne object: collection arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - deleteMany on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["delete"] blockConnection: true blockTimeMS: 15 - name: deleteMany object: collection arguments: timeoutMS: 1000 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - deleteMany on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["delete"] blockConnection: true blockTimeMS: 15 - name: deleteMany object: collection arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - replaceOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 15 - name: replaceOne object: collection arguments: timeoutMS: 1000 filter: {} replacement: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - replaceOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 15 - name: replaceOne object: collection arguments: timeoutMS: 0 filter: {} replacement: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - updateOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 15 - name: updateOne object: collection arguments: timeoutMS: 1000 filter: {} update: { $set: { x: 1 } } expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - updateOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 15 - name: updateOne object: collection arguments: timeoutMS: 0 filter: {} update: { $set: { x: 1 } } expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - updateMany on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 15 - name: updateMany object: collection arguments: timeoutMS: 1000 filter: {} update: { $set: { x: 1 } } expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - updateMany on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 15 - name: updateMany object: collection arguments: timeoutMS: 0 filter: {} update: { $set: { x: 1 } } expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - findOneAndDelete on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 15 - name: findOneAndDelete object: collection arguments: timeoutMS: 1000 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - findOneAndDelete on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 15 - name: findOneAndDelete object: collection arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - findOneAndReplace on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 15 - name: findOneAndReplace object: collection arguments: timeoutMS: 1000 filter: {} replacement: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - findOneAndReplace on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 15 - name: findOneAndReplace object: collection arguments: timeoutMS: 0 filter: {} replacement: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - findOneAndUpdate on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 15 - name: findOneAndUpdate object: collection arguments: timeoutMS: 1000 filter: {} update: { $set: { x: 1 } } expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - findOneAndUpdate on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 15 - name: findOneAndUpdate object: collection arguments: timeoutMS: 0 filter: {} update: { $set: { x: 1 } } expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - bulkWrite on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 15 - name: bulkWrite object: collection arguments: timeoutMS: 1000 requests: - insertOne: document: { _id: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - bulkWrite on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 15 - name: bulkWrite object: collection arguments: timeoutMS: 0 requests: - insertOne: document: { _id: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - createIndex on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["createIndexes"] blockConnection: true blockTimeMS: 15 - name: createIndex object: collection arguments: timeoutMS: 1000 keys: { x: 1 } name: "x_1" expectEvents: - client: client events: - commandStartedEvent: commandName: createIndexes databaseName: databaseName command: createIndexes: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - createIndex on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["createIndexes"] blockConnection: true blockTimeMS: 15 - name: createIndex object: collection arguments: timeoutMS: 0 keys: { x: 1 } name: "x_1" expectEvents: - client: client events: - commandStartedEvent: commandName: createIndexes databaseName: databaseName command: createIndexes: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - dropIndex on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["dropIndexes"] blockConnection: true blockTimeMS: 15 - name: dropIndex object: collection arguments: timeoutMS: 1000 name: "x_1" expectError: isTimeoutError: false # IndexNotFound expectEvents: - client: client events: - commandStartedEvent: commandName: dropIndexes databaseName: databaseName command: dropIndexes: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - dropIndex on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["dropIndexes"] blockConnection: true blockTimeMS: 15 - name: dropIndex object: collection arguments: timeoutMS: 0 name: "x_1" expectError: isTimeoutError: false # IndexNotFound expectEvents: - client: client events: - commandStartedEvent: commandName: dropIndexes databaseName: databaseName command: dropIndexes: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS can be configured for an operation - dropIndexes on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["dropIndexes"] blockConnection: true blockTimeMS: 15 - name: dropIndexes object: collection arguments: timeoutMS: 1000 expectEvents: - client: client events: - commandStartedEvent: commandName: dropIndexes databaseName: databaseName command: dropIndexes: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "timeoutMS can be set to 0 for an operation - dropIndexes on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["dropIndexes"] blockConnection: true blockTimeMS: 15 - name: dropIndexes object: collection arguments: timeoutMS: 0 expectEvents: - client: client events: - commandStartedEvent: commandName: dropIndexes databaseName: databaseName command: dropIndexes: collectionName maxTimeMS: { $$exists: false }	54.49 KB	2025-05-25 12:27
📄 retryability-legacy-timeouts.json { "description": "legacy timeouts behave correctly for retryable operations", "schemaVersion": "1.9", "runOnRequirements": [ { "minServerVersion": "4.4", "topologies": [ "replicaset", "sharded-replicaset" ] } ], "createEntities": [ { "client": { "id": "failPointClient", "useMultipleMongoses": false } }, { "client": { "id": "client", "uriOptions": { "socketTimeoutMS": 100 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ], "initialData": [ { "collectionName": "coll", "databaseName": "test", "documents": [] } ], "tests": [ { "description": "operation succeeds after one socket timeout - insertOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "insertOne", "object": "collection", "arguments": { "document": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll" } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - insertOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "insertOne", "object": "collection", "arguments": { "document": { "x": 1 } }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll" } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - insertMany on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "insertMany", "object": "collection", "arguments": { "documents": [ { "x": 1 } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll" } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - insertMany on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "insertMany", "object": "collection", "arguments": { "documents": [ { "x": 1 } ] }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll" } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - deleteOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "delete" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "deleteOne", "object": "collection", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll" } } }, { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - deleteOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "delete" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "deleteOne", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll" } } }, { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - replaceOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "replaceOne", "object": "collection", "arguments": { "filter": {}, "replacement": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll" } } }, { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - replaceOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "replaceOne", "object": "collection", "arguments": { "filter": {}, "replacement": { "x": 1 } }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll" } } }, { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - updateOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "updateOne", "object": "collection", "arguments": { "filter": {}, "update": { "$set": { "x": 1 } } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll" } } }, { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - updateOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "updateOne", "object": "collection", "arguments": { "filter": {}, "update": { "$set": { "x": 1 } } }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll" } } }, { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - findOneAndDelete on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "findOneAndDelete", "object": "collection", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll" } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - findOneAndDelete on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "findOneAndDelete", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll" } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - findOneAndReplace on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "findOneAndReplace", "object": "collection", "arguments": { "filter": {}, "replacement": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll" } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - findOneAndReplace on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "findOneAndReplace", "object": "collection", "arguments": { "filter": {}, "replacement": { "x": 1 } }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll" } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - findOneAndUpdate on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "findOneAndUpdate", "object": "collection", "arguments": { "filter": {}, "update": { "$set": { "x": 1 } } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll" } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - findOneAndUpdate on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "findOneAndUpdate", "object": "collection", "arguments": { "filter": {}, "update": { "$set": { "x": 1 } } }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll" } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - bulkWrite on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "bulkWrite", "object": "collection", "arguments": { "requests": [ { "insertOne": { "document": { "_id": 1 } } } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll" } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - bulkWrite on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "bulkWrite", "object": "collection", "arguments": { "requests": [ { "insertOne": { "document": { "_id": 1 } } } ] }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll" } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - listDatabases on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listDatabases" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "listDatabases", "object": "client", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1 } } }, { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1 } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - listDatabases on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "listDatabases" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "listDatabases", "object": "client", "arguments": { "filter": {} }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1 } } }, { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1 } } } ] } ] }, { "description": "operation succeeds after one socket timeout - listDatabaseNames on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listDatabases" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "listDatabaseNames", "object": "client" } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1 } } }, { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1 } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - listDatabaseNames on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "listDatabases" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "listDatabaseNames", "object": "client", "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1 } } }, { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1 } } } ] } ] }, { "description": "operation succeeds after one socket timeout - createChangeStream on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "createChangeStream", "object": "client", "arguments": { "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "admin", "command": { "aggregate": 1 } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "admin", "command": { "aggregate": 1 } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - createChangeStream on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "createChangeStream", "object": "client", "arguments": { "pipeline": [] }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "admin", "command": { "aggregate": 1 } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "admin", "command": { "aggregate": 1 } } } ] } ] }, { "description": "operation succeeds after one socket timeout - aggregate on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "aggregate", "object": "database", "arguments": { "pipeline": [ { "$listLocalSessions": {} }, { "$limit": 1 } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1 } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1 } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - aggregate on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "aggregate", "object": "database", "arguments": { "pipeline": [ { "$listLocalSessions": {} }, { "$limit": 1 } ] }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1 } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1 } } } ] } ] }, { "description": "operation succeeds after one socket timeout - listCollections on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listCollections" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "listCollections", "object": "database", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1 } } }, { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1 } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - listCollections on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "listCollections" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "listCollections", "object": "database", "arguments": { "filter": {} }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1 } } }, { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1 } } } ] } ] }, { "description": "operation succeeds after one socket timeout - listCollectionNames on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listCollections" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "listCollectionNames", "object": "database", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1 } } }, { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1 } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - listCollectionNames on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "listCollections" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "listCollectionNames", "object": "database", "arguments": { "filter": {} }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1 } } }, { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1 } } } ] } ] }, { "description": "operation succeeds after one socket timeout - createChangeStream on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "createChangeStream", "object": "database", "arguments": { "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1 } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1 } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - createChangeStream on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "createChangeStream", "object": "database", "arguments": { "pipeline": [] }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1 } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1 } } } ] } ] }, { "description": "operation succeeds after one socket timeout - aggregate on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "aggregate", "object": "collection", "arguments": { "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll" } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - aggregate on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "aggregate", "object": "collection", "arguments": { "pipeline": [] }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll" } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - count on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "count" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "count", "object": "collection", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll" } } }, { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - count on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "count" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "count", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll" } } }, { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - countDocuments on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "countDocuments", "object": "collection", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll" } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - countDocuments on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "countDocuments", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll" } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - estimatedDocumentCount on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "count" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "estimatedDocumentCount", "object": "collection" } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll" } } }, { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - estimatedDocumentCount on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "count" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "estimatedDocumentCount", "object": "collection", "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll" } } }, { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - distinct on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "distinct" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "distinct", "object": "collection", "arguments": { "fieldName": "x", "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "distinct", "databaseName": "test", "command": { "distinct": "coll" } } }, { "commandStartedEvent": { "commandName": "distinct", "databaseName": "test", "command": { "distinct": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - distinct on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "distinct" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "distinct", "object": "collection", "arguments": { "fieldName": "x", "filter": {} }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "distinct", "databaseName": "test", "command": { "distinct": "coll" } } }, { "commandStartedEvent": { "commandName": "distinct", "databaseName": "test", "command": { "distinct": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - find on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "find", "object": "collection", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll" } } }, { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - find on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "find", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll" } } }, { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - findOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "findOne", "object": "collection", "arguments": { "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll" } } }, { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - findOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "findOne", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll" } } }, { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - listIndexes on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "listIndexes" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "listIndexes", "object": "collection" } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll" } } }, { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - listIndexes on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "listIndexes" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "listIndexes", "object": "collection", "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll" } } }, { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll" } } } ] } ] }, { "description": "operation succeeds after one socket timeout - createChangeStream on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "createChangeStream", "object": "collection", "arguments": { "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll" } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll" } } } ] } ] }, { "description": "operation fails after two consecutive socket timeouts - createChangeStream on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 110 } } } }, { "name": "createChangeStream", "object": "collection", "arguments": { "pipeline": [] }, "expectError": { "isClientError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll" } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll" } } } ] } ] } ] }	74.22 KB	2025-05-25 12:27
📄 retryability-legacy-timeouts.yml # Tests in this file are generated from retryability-legacy-timeouts.yml.template. description: "legacy timeouts behave correctly for retryable operations" schemaVersion: "1.9" runOnRequirements: - minServerVersion: "4.4" topologies: ["replicaset", "sharded-replicaset"] createEntities: - client: id: &failPointClient failPointClient useMultipleMongoses: false - client: id: &client client uriOptions: socketTimeoutMS: 100 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: &databaseName test - collection: id: &collection collection database: database collectionName: &collectionName coll initialData: - collectionName: collectionName databaseName: databaseName documents: [] tests: # For each retryable operation, run two tests: # # 1. Socket timeouts are retried once - Each test constructs a client entity with socketTimeoutMS=50, configures a # fail point to block the operation once for 110ms, and expects the operation to succeed. # # 2. Operations fail after two consecutive socket timeouts - Same as (1) but the fail point is configured to block # the operation twice and the test expects the operation to fail. - description: "operation succeeds after one socket timeout - insertOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 110 - name: insertOne object: collection arguments: document: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName - description: "operation fails after two consecutive socket timeouts - insertOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 110 - name: insertOne object: collection arguments: document: { x: 1 } expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName - description: "operation succeeds after one socket timeout - insertMany on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 110 - name: insertMany object: collection arguments: documents: - { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName - description: "operation fails after two consecutive socket timeouts - insertMany on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 110 - name: insertMany object: collection arguments: documents: - { x: 1 } expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName - description: "operation succeeds after one socket timeout - deleteOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["delete"] blockConnection: true blockTimeMS: 110 - name: deleteOne object: collection arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName - description: "operation fails after two consecutive socket timeouts - deleteOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["delete"] blockConnection: true blockTimeMS: 110 - name: deleteOne object: collection arguments: filter: {} expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName - description: "operation succeeds after one socket timeout - replaceOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 110 - name: replaceOne object: collection arguments: filter: {} replacement: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName - description: "operation fails after two consecutive socket timeouts - replaceOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 110 - name: replaceOne object: collection arguments: filter: {} replacement: { x: 1 } expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName - description: "operation succeeds after one socket timeout - updateOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 110 - name: updateOne object: collection arguments: filter: {} update: { $set: { x: 1 } } expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName - description: "operation fails after two consecutive socket timeouts - updateOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 110 - name: updateOne object: collection arguments: filter: {} update: { $set: { x: 1 } } expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName - description: "operation succeeds after one socket timeout - findOneAndDelete on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 110 - name: findOneAndDelete object: collection arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName - description: "operation fails after two consecutive socket timeouts - findOneAndDelete on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 110 - name: findOneAndDelete object: collection arguments: filter: {} expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName - description: "operation succeeds after one socket timeout - findOneAndReplace on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 110 - name: findOneAndReplace object: collection arguments: filter: {} replacement: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName - description: "operation fails after two consecutive socket timeouts - findOneAndReplace on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 110 - name: findOneAndReplace object: collection arguments: filter: {} replacement: { x: 1 } expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName - description: "operation succeeds after one socket timeout - findOneAndUpdate on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 110 - name: findOneAndUpdate object: collection arguments: filter: {} update: { $set: { x: 1 } } expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName - description: "operation fails after two consecutive socket timeouts - findOneAndUpdate on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 110 - name: findOneAndUpdate object: collection arguments: filter: {} update: { $set: { x: 1 } } expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName - description: "operation succeeds after one socket timeout - bulkWrite on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 110 - name: bulkWrite object: collection arguments: requests: - insertOne: document: { _id: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName - description: "operation fails after two consecutive socket timeouts - bulkWrite on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 110 - name: bulkWrite object: collection arguments: requests: - insertOne: document: { _id: 1 } expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName - description: "operation succeeds after one socket timeout - listDatabases on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listDatabases"] blockConnection: true blockTimeMS: 110 - name: listDatabases object: client arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 - description: "operation fails after two consecutive socket timeouts - listDatabases on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["listDatabases"] blockConnection: true blockTimeMS: 110 - name: listDatabases object: client arguments: filter: {} expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 - description: "operation succeeds after one socket timeout - listDatabaseNames on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listDatabases"] blockConnection: true blockTimeMS: 110 - name: listDatabaseNames object: client expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 - description: "operation fails after two consecutive socket timeouts - listDatabaseNames on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["listDatabases"] blockConnection: true blockTimeMS: 110 - name: listDatabaseNames object: client expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 - description: "operation succeeds after one socket timeout - createChangeStream on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 110 - name: createChangeStream object: client arguments: pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: admin command: aggregate: 1 - commandStartedEvent: commandName: aggregate databaseName: admin command: aggregate: 1 - description: "operation fails after two consecutive socket timeouts - createChangeStream on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 110 - name: createChangeStream object: client arguments: pipeline: [] expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: admin command: aggregate: 1 - commandStartedEvent: commandName: aggregate databaseName: admin command: aggregate: 1 - description: "operation succeeds after one socket timeout - aggregate on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 110 - name: aggregate object: database arguments: pipeline: [ { $listLocalSessions: {} }, { $limit: 1 } ] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 - description: "operation fails after two consecutive socket timeouts - aggregate on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 110 - name: aggregate object: database arguments: pipeline: [ { $listLocalSessions: {} }, { $limit: 1 } ] expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 - description: "operation succeeds after one socket timeout - listCollections on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listCollections"] blockConnection: true blockTimeMS: 110 - name: listCollections object: database arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 - description: "operation fails after two consecutive socket timeouts - listCollections on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["listCollections"] blockConnection: true blockTimeMS: 110 - name: listCollections object: database arguments: filter: {} expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 - description: "operation succeeds after one socket timeout - listCollectionNames on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listCollections"] blockConnection: true blockTimeMS: 110 - name: listCollectionNames object: database arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 - description: "operation fails after two consecutive socket timeouts - listCollectionNames on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["listCollections"] blockConnection: true blockTimeMS: 110 - name: listCollectionNames object: database arguments: filter: {} expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 - description: "operation succeeds after one socket timeout - createChangeStream on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 110 - name: createChangeStream object: database arguments: pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 - description: "operation fails after two consecutive socket timeouts - createChangeStream on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 110 - name: createChangeStream object: database arguments: pipeline: [] expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 - description: "operation succeeds after one socket timeout - aggregate on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 110 - name: aggregate object: collection arguments: pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName - description: "operation fails after two consecutive socket timeouts - aggregate on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 110 - name: aggregate object: collection arguments: pipeline: [] expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName - description: "operation succeeds after one socket timeout - count on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["count"] blockConnection: true blockTimeMS: 110 - name: count object: collection arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName - description: "operation fails after two consecutive socket timeouts - count on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["count"] blockConnection: true blockTimeMS: 110 - name: count object: collection arguments: filter: {} expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName - description: "operation succeeds after one socket timeout - countDocuments on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 110 - name: countDocuments object: collection arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName - description: "operation fails after two consecutive socket timeouts - countDocuments on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 110 - name: countDocuments object: collection arguments: filter: {} expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName - description: "operation succeeds after one socket timeout - estimatedDocumentCount on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["count"] blockConnection: true blockTimeMS: 110 - name: estimatedDocumentCount object: collection expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName - description: "operation fails after two consecutive socket timeouts - estimatedDocumentCount on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["count"] blockConnection: true blockTimeMS: 110 - name: estimatedDocumentCount object: collection expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName - description: "operation succeeds after one socket timeout - distinct on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["distinct"] blockConnection: true blockTimeMS: 110 - name: distinct object: collection arguments: fieldName: x filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: distinct databaseName: databaseName command: distinct: collectionName - commandStartedEvent: commandName: distinct databaseName: databaseName command: distinct: collectionName - description: "operation fails after two consecutive socket timeouts - distinct on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["distinct"] blockConnection: true blockTimeMS: 110 - name: distinct object: collection arguments: fieldName: x filter: {} expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: distinct databaseName: databaseName command: distinct: collectionName - commandStartedEvent: commandName: distinct databaseName: databaseName command: distinct: collectionName - description: "operation succeeds after one socket timeout - find on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 110 - name: find object: collection arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName - description: "operation fails after two consecutive socket timeouts - find on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 110 - name: find object: collection arguments: filter: {} expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName - description: "operation succeeds after one socket timeout - findOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 110 - name: findOne object: collection arguments: filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName - description: "operation fails after two consecutive socket timeouts - findOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 110 - name: findOne object: collection arguments: filter: {} expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName - description: "operation succeeds after one socket timeout - listIndexes on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["listIndexes"] blockConnection: true blockTimeMS: 110 - name: listIndexes object: collection expectEvents: - client: client events: - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName - description: "operation fails after two consecutive socket timeouts - listIndexes on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["listIndexes"] blockConnection: true blockTimeMS: 110 - name: listIndexes object: collection expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName - description: "operation succeeds after one socket timeout - createChangeStream on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 110 - name: createChangeStream object: collection arguments: pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName - description: "operation fails after two consecutive socket timeouts - createChangeStream on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 110 - name: createChangeStream object: collection arguments: pipeline: [] expectError: # Network errors are considered client errors by the unified test format spec. isClientError: true expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName	51.62 KB	2025-05-25 12:27
📄 retryability-timeoutMS.json { "description": "timeoutMS behaves correctly for retryable operations", "schemaVersion": "1.9", "runOnRequirements": [ { "minServerVersion": "4.0", "topologies": [ "replicaset" ] }, { "minServerVersion": "4.2", "topologies": [ "replicaset", "sharded-replicaset" ] } ], "createEntities": [ { "client": { "id": "failPointClient", "useMultipleMongoses": false } }, { "client": { "id": "client", "uriOptions": { "timeoutMS": 100 }, "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "database", "client": "client", "databaseName": "test" } }, { "collection": { "id": "collection", "database": "database", "collectionName": "coll" } } ], "initialData": [ { "collectionName": "coll", "databaseName": "test", "documents": [] } ], "tests": [ { "description": "timeoutMS applies to whole operation, not individual attempts - insertOne on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "insertOne", "object": "collection", "arguments": { "document": { "x": 1 } }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - insertOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "insert" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "insertOne", "object": "collection", "arguments": { "timeoutMS": 500, "document": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - insertOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "insert" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "insertOne", "object": "collection", "arguments": { "timeoutMS": 0, "document": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - insertMany on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "insertMany", "object": "collection", "arguments": { "documents": [ { "x": 1 } ] }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - insertMany on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "insert" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "insertMany", "object": "collection", "arguments": { "timeoutMS": 500, "documents": [ { "x": 1 } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - insertMany on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "insert" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "insertMany", "object": "collection", "arguments": { "timeoutMS": 0, "documents": [ { "x": 1 } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - deleteOne on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "delete" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "deleteOne", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - deleteOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "delete" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "deleteOne", "object": "collection", "arguments": { "timeoutMS": 500, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - deleteOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "delete" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "deleteOne", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "delete", "databaseName": "test", "command": { "delete": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - replaceOne on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "replaceOne", "object": "collection", "arguments": { "filter": {}, "replacement": { "x": 1 } }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - replaceOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "update" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "replaceOne", "object": "collection", "arguments": { "timeoutMS": 500, "filter": {}, "replacement": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - replaceOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "update" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "replaceOne", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {}, "replacement": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - updateOne on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "update" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "updateOne", "object": "collection", "arguments": { "filter": {}, "update": { "$set": { "x": 1 } } }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - updateOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "update" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "updateOne", "object": "collection", "arguments": { "timeoutMS": 500, "filter": {}, "update": { "$set": { "x": 1 } } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - updateOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "update" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "updateOne", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {}, "update": { "$set": { "x": 1 } } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "update", "databaseName": "test", "command": { "update": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - findOneAndDelete on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "findOneAndDelete", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - findOneAndDelete on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "findAndModify" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "findOneAndDelete", "object": "collection", "arguments": { "timeoutMS": 500, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - findOneAndDelete on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "findAndModify" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "findOneAndDelete", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - findOneAndReplace on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "findOneAndReplace", "object": "collection", "arguments": { "filter": {}, "replacement": { "x": 1 } }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - findOneAndReplace on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "findAndModify" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "findOneAndReplace", "object": "collection", "arguments": { "timeoutMS": 500, "filter": {}, "replacement": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - findOneAndReplace on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "findAndModify" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "findOneAndReplace", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {}, "replacement": { "x": 1 } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - findOneAndUpdate on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "findAndModify" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "findOneAndUpdate", "object": "collection", "arguments": { "filter": {}, "update": { "$set": { "x": 1 } } }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - findOneAndUpdate on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "findAndModify" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "findOneAndUpdate", "object": "collection", "arguments": { "timeoutMS": 500, "filter": {}, "update": { "$set": { "x": 1 } } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - findOneAndUpdate on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "findAndModify" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "findOneAndUpdate", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {}, "update": { "$set": { "x": 1 } } } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "findAndModify", "databaseName": "test", "command": { "findAndModify": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - bulkWrite on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "insert" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "bulkWrite", "object": "collection", "arguments": { "requests": [ { "insertOne": { "document": { "_id": 1 } } } ] }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - bulkWrite on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "insert" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "bulkWrite", "object": "collection", "arguments": { "timeoutMS": 500, "requests": [ { "insertOne": { "document": { "_id": 1 } } } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - bulkWrite on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "insert" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "bulkWrite", "object": "collection", "arguments": { "timeoutMS": 0, "requests": [ { "insertOne": { "document": { "_id": 1 } } } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "insert", "databaseName": "test", "command": { "insert": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - listDatabases on client", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "listDatabases" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "listDatabases", "object": "client", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - listDatabases on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "listDatabases" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "listDatabases", "object": "client", "arguments": { "timeoutMS": 500, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - listDatabases on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "listDatabases" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "listDatabases", "object": "client", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - listDatabaseNames on client", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "listDatabases" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "listDatabaseNames", "object": "client", "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - listDatabaseNames on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "listDatabases" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "listDatabaseNames", "object": "client", "arguments": { "timeoutMS": 500 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - listDatabaseNames on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "listDatabases" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "listDatabaseNames", "object": "client", "arguments": { "timeoutMS": 0 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "listDatabases", "databaseName": "admin", "command": { "listDatabases": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - createChangeStream on client", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "createChangeStream", "object": "client", "arguments": { "pipeline": [] }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - createChangeStream on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "createChangeStream", "object": "client", "arguments": { "timeoutMS": 500, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "admin", "command": { "aggregate": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "admin", "command": { "aggregate": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "admin", "command": { "aggregate": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - createChangeStream on client", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "createChangeStream", "object": "client", "arguments": { "timeoutMS": 0, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "admin", "command": { "aggregate": 1, "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "admin", "command": { "aggregate": 1, "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "admin", "command": { "aggregate": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - aggregate on database", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "aggregate", "object": "database", "arguments": { "pipeline": [ { "$listLocalSessions": {} }, { "$limit": 1 } ] }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - aggregate on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "aggregate", "object": "database", "arguments": { "timeoutMS": 500, "pipeline": [ { "$listLocalSessions": {} }, { "$limit": 1 } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - aggregate on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "aggregate", "object": "database", "arguments": { "timeoutMS": 0, "pipeline": [ { "$listLocalSessions": {} }, { "$limit": 1 } ] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - listCollections on database", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "listCollections" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "listCollections", "object": "database", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - listCollections on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "listCollections" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "listCollections", "object": "database", "arguments": { "timeoutMS": 500, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - listCollections on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "listCollections" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "listCollections", "object": "database", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - listCollectionNames on database", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "listCollections" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "listCollectionNames", "object": "database", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - listCollectionNames on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "listCollections" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "listCollectionNames", "object": "database", "arguments": { "timeoutMS": 500, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - listCollectionNames on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "listCollections" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "listCollectionNames", "object": "database", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "listCollections", "databaseName": "test", "command": { "listCollections": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - createChangeStream on database", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "createChangeStream", "object": "database", "arguments": { "pipeline": [] }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - createChangeStream on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "createChangeStream", "object": "database", "arguments": { "timeoutMS": 500, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - createChangeStream on database", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "createChangeStream", "object": "database", "arguments": { "timeoutMS": 0, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": 1, "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - aggregate on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "aggregate", "object": "collection", "arguments": { "pipeline": [] }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - aggregate on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "aggregate", "object": "collection", "arguments": { "timeoutMS": 500, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - aggregate on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "aggregate", "object": "collection", "arguments": { "timeoutMS": 0, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - count on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "count" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "count", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - count on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "count" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "count", "object": "collection", "arguments": { "timeoutMS": 500, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - count on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "count" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "count", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - countDocuments on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "countDocuments", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - countDocuments on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "countDocuments", "object": "collection", "arguments": { "timeoutMS": 500, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - countDocuments on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "countDocuments", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - estimatedDocumentCount on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "count" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "estimatedDocumentCount", "object": "collection", "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - estimatedDocumentCount on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "count" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "estimatedDocumentCount", "object": "collection", "arguments": { "timeoutMS": 500 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - estimatedDocumentCount on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "count" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "estimatedDocumentCount", "object": "collection", "arguments": { "timeoutMS": 0 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "count", "databaseName": "test", "command": { "count": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - distinct on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "distinct" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "distinct", "object": "collection", "arguments": { "fieldName": "x", "filter": {} }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - distinct on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "distinct" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "distinct", "object": "collection", "arguments": { "timeoutMS": 500, "fieldName": "x", "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "distinct", "databaseName": "test", "command": { "distinct": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "distinct", "databaseName": "test", "command": { "distinct": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "distinct", "databaseName": "test", "command": { "distinct": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - distinct on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "distinct" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "distinct", "object": "collection", "arguments": { "timeoutMS": 0, "fieldName": "x", "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "distinct", "databaseName": "test", "command": { "distinct": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "distinct", "databaseName": "test", "command": { "distinct": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "distinct", "databaseName": "test", "command": { "distinct": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - find on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "find", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - find on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "find" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "find", "object": "collection", "arguments": { "timeoutMS": 500, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - find on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "find" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "find", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - findOne on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "find" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "findOne", "object": "collection", "arguments": { "filter": {} }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - findOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "find" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "findOne", "object": "collection", "arguments": { "timeoutMS": 500, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - findOne on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "find" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "findOne", "object": "collection", "arguments": { "timeoutMS": 0, "filter": {} } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "find", "databaseName": "test", "command": { "find": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - listIndexes on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "listIndexes" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "listIndexes", "object": "collection", "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - listIndexes on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "listIndexes" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "listIndexes", "object": "collection", "arguments": { "timeoutMS": 500 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - listIndexes on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "listIndexes" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "listIndexes", "object": "collection", "arguments": { "timeoutMS": 0 } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "listIndexes", "databaseName": "test", "command": { "listIndexes": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "timeoutMS applies to whole operation, not individual attempts - createChangeStream on collection", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 4 }, "data": { "failCommands": [ "aggregate" ], "blockConnection": true, "blockTimeMS": 60, "errorCode": 7, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "createChangeStream", "object": "collection", "arguments": { "pipeline": [] }, "expectError": { "isTimeoutError": true } } ] }, { "description": "operation is retried multiple times for non-zero timeoutMS - createChangeStream on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "createChangeStream", "object": "collection", "arguments": { "timeoutMS": 500, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$type": [ "int", "long" ] } } } } ] } ] }, { "description": "operation is retried multiple times if timeoutMS is zero - createChangeStream on collection", "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "aggregate" ], "errorCode": 7, "closeConnection": false, "errorLabels": [ "RetryableWriteError" ] } } } }, { "name": "createChangeStream", "object": "collection", "arguments": { "timeoutMS": 0, "pipeline": [] } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "aggregate", "databaseName": "test", "command": { "aggregate": "coll", "maxTimeMS": { "$$exists": false } } } } ] } ] } ] }	138.09 KB	2025-05-25 12:27
📄 retryability-timeoutMS.yml # Tests in this file are generated from retryability-timeoutMS.yml.template. description: "timeoutMS behaves correctly for retryable operations" schemaVersion: "1.9" # failCommand is available on 4.0+ replica sets and 4.2+ sharded clusters. runOnRequirements: - minServerVersion: "4.0" topologies: ["replicaset"] - minServerVersion: "4.2" topologies: ["replicaset", "sharded-replicaset"] createEntities: - client: id: &failPointClient failPointClient useMultipleMongoses: false - client: id: &client client uriOptions: timeoutMS: 100 useMultipleMongoses: false observeEvents: - commandStartedEvent ignoreCommandMonitoringEvents: - killCursors - database: id: &database database client: client databaseName: &databaseName test - collection: id: &collection collection database: database collectionName: &collectionName coll initialData: - collectionName: collectionName databaseName: databaseName documents: [] tests: # For each retryable operation, run three tests: # # 1. timeoutMS applies to the whole operation, not to individual attempts - Client timeoutMS=100 and the operation is # fails with a retryable error after being blocked server-side for 60ms. The operation should fail with a timeout error # because the second attempt should take it over the 100ms limit. This test only runs on 4.4+ because it uses the # blockConnection option in failCommand. # # 2. operation is retried multiple times if timeoutMS is set to a non-zero value - Client timeoutMS=100 and the # operation fails with a retryable error twice. Drivers should send the original operation and two retries, the # second of which should succeed. # # 3. operation is retried multiple times if timeoutMS is set to a zero - Override timeoutMS to zero for the operation # and set a fail point to force a retryable error twice. Drivers should send the original operation and two retries, # the second of which should succeed. # # The fail points in these tests use error code 7 (HostNotFound) because it is a retryable error but does not trigger # an SDAM state change so we don't lose any time to server rediscovery. The tests also explicitly specify an # errorLabels array in the fail point to avoid behavioral differences among server types and ensure that the error # will be considered retryable. - description: "timeoutMS applies to whole operation, not individual attempts - insertOne on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: insertOne object: collection arguments: document: { x: 1 } expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - insertOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["insert"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: insertOne object: collection arguments: timeoutMS: 500 document: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - insertOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["insert"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: insertOne object: collection arguments: timeoutMS: 0 document: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - insertMany on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: insertMany object: collection arguments: documents: - { x: 1 } expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - insertMany on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["insert"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: insertMany object: collection arguments: timeoutMS: 500 documents: - { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - insertMany on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["insert"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: insertMany object: collection arguments: timeoutMS: 0 documents: - { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - deleteOne on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["delete"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: deleteOne object: collection arguments: filter: {} expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - deleteOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["delete"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: deleteOne object: collection arguments: timeoutMS: 500 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - deleteOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["delete"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: deleteOne object: collection arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: delete databaseName: databaseName command: delete: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - replaceOne on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: replaceOne object: collection arguments: filter: {} replacement: { x: 1 } expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - replaceOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["update"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: replaceOne object: collection arguments: timeoutMS: 500 filter: {} replacement: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - replaceOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["update"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: replaceOne object: collection arguments: timeoutMS: 0 filter: {} replacement: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - updateOne on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["update"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: updateOne object: collection arguments: filter: {} update: { $set: { x: 1 } } expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - updateOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["update"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: updateOne object: collection arguments: timeoutMS: 500 filter: {} update: { $set: { x: 1 } } expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - updateOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["update"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: updateOne object: collection arguments: timeoutMS: 0 filter: {} update: { $set: { x: 1 } } expectEvents: - client: client events: - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: update databaseName: databaseName command: update: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - findOneAndDelete on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: findOneAndDelete object: collection arguments: filter: {} expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - findOneAndDelete on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["findAndModify"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: findOneAndDelete object: collection arguments: timeoutMS: 500 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - findOneAndDelete on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["findAndModify"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: findOneAndDelete object: collection arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - findOneAndReplace on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: findOneAndReplace object: collection arguments: filter: {} replacement: { x: 1 } expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - findOneAndReplace on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["findAndModify"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: findOneAndReplace object: collection arguments: timeoutMS: 500 filter: {} replacement: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - findOneAndReplace on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["findAndModify"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: findOneAndReplace object: collection arguments: timeoutMS: 0 filter: {} replacement: { x: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - findOneAndUpdate on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["findAndModify"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: findOneAndUpdate object: collection arguments: filter: {} update: { $set: { x: 1 } } expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - findOneAndUpdate on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["findAndModify"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: findOneAndUpdate object: collection arguments: timeoutMS: 500 filter: {} update: { $set: { x: 1 } } expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - findOneAndUpdate on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["findAndModify"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: findOneAndUpdate object: collection arguments: timeoutMS: 0 filter: {} update: { $set: { x: 1 } } expectEvents: - client: client events: - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: findAndModify databaseName: databaseName command: findAndModify: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - bulkWrite on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["insert"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: bulkWrite object: collection arguments: requests: - insertOne: document: { _id: 1 } expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - bulkWrite on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["insert"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: bulkWrite object: collection arguments: timeoutMS: 500 requests: - insertOne: document: { _id: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - bulkWrite on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["insert"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: bulkWrite object: collection arguments: timeoutMS: 0 requests: - insertOne: document: { _id: 1 } expectEvents: - client: client events: - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: insert databaseName: databaseName command: insert: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - listDatabases on client" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["listDatabases"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: listDatabases object: client arguments: filter: {} expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - listDatabases on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["listDatabases"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: listDatabases object: client arguments: timeoutMS: 500 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - listDatabases on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["listDatabases"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: listDatabases object: client arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - listDatabaseNames on client" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["listDatabases"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: listDatabaseNames object: client expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - listDatabaseNames on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["listDatabases"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: listDatabaseNames object: client arguments: timeoutMS: 500 expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - listDatabaseNames on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["listDatabases"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: listDatabaseNames object: client arguments: timeoutMS: 0 expectEvents: - client: client events: - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: listDatabases databaseName: admin command: listDatabases: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - createChangeStream on client" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: createChangeStream object: client arguments: pipeline: [] expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - createChangeStream on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: createChangeStream object: client arguments: timeoutMS: 500 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: admin command: aggregate: 1 maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: aggregate databaseName: admin command: aggregate: 1 maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: aggregate databaseName: admin command: aggregate: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - createChangeStream on client" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: createChangeStream object: client arguments: timeoutMS: 0 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: admin command: aggregate: 1 maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: aggregate databaseName: admin command: aggregate: 1 maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: aggregate databaseName: admin command: aggregate: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - aggregate on database" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: aggregate object: database arguments: pipeline: [ { $listLocalSessions: {} }, { $limit: 1 } ] expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - aggregate on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: aggregate object: database arguments: timeoutMS: 500 pipeline: [ { $listLocalSessions: {} }, { $limit: 1 } ] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - aggregate on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: aggregate object: database arguments: timeoutMS: 0 pipeline: [ { $listLocalSessions: {} }, { $limit: 1 } ] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - listCollections on database" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["listCollections"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: listCollections object: database arguments: filter: {} expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - listCollections on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["listCollections"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: listCollections object: database arguments: timeoutMS: 500 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - listCollections on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["listCollections"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: listCollections object: database arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - listCollectionNames on database" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["listCollections"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: listCollectionNames object: database arguments: filter: {} expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - listCollectionNames on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["listCollections"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: listCollectionNames object: database arguments: timeoutMS: 500 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - listCollectionNames on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["listCollections"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: listCollectionNames object: database arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: listCollections databaseName: databaseName command: listCollections: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - createChangeStream on database" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: createChangeStream object: database arguments: pipeline: [] expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - createChangeStream on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: createChangeStream object: database arguments: timeoutMS: 500 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - createChangeStream on database" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: createChangeStream object: database arguments: timeoutMS: 0 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: 1 maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - aggregate on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: aggregate object: collection arguments: pipeline: [] expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - aggregate on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: aggregate object: collection arguments: timeoutMS: 500 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - aggregate on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: aggregate object: collection arguments: timeoutMS: 0 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - count on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["count"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: count object: collection arguments: filter: {} expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - count on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["count"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: count object: collection arguments: timeoutMS: 500 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - count on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["count"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: count object: collection arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - countDocuments on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: countDocuments object: collection arguments: filter: {} expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - countDocuments on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: countDocuments object: collection arguments: timeoutMS: 500 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - countDocuments on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: countDocuments object: collection arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - estimatedDocumentCount on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["count"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: estimatedDocumentCount object: collection expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - estimatedDocumentCount on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["count"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: estimatedDocumentCount object: collection arguments: timeoutMS: 500 expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - estimatedDocumentCount on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["count"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: estimatedDocumentCount object: collection arguments: timeoutMS: 0 expectEvents: - client: client events: - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: count databaseName: databaseName command: count: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - distinct on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["distinct"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: distinct object: collection arguments: fieldName: x filter: {} expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - distinct on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["distinct"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: distinct object: collection arguments: timeoutMS: 500 fieldName: x filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: distinct databaseName: databaseName command: distinct: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: distinct databaseName: databaseName command: distinct: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: distinct databaseName: databaseName command: distinct: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - distinct on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["distinct"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: distinct object: collection arguments: timeoutMS: 0 fieldName: x filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: distinct databaseName: databaseName command: distinct: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: distinct databaseName: databaseName command: distinct: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: distinct databaseName: databaseName command: distinct: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - find on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: find object: collection arguments: filter: {} expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - find on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["find"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: find object: collection arguments: timeoutMS: 500 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - find on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["find"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: find object: collection arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - findOne on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["find"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: findOne object: collection arguments: filter: {} expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - findOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["find"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: findOne object: collection arguments: timeoutMS: 500 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - findOne on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["find"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: findOne object: collection arguments: timeoutMS: 0 filter: {} expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: find databaseName: databaseName command: find: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - listIndexes on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["listIndexes"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: listIndexes object: collection expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - listIndexes on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["listIndexes"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: listIndexes object: collection arguments: timeoutMS: 500 expectEvents: - client: client events: - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - listIndexes on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["listIndexes"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: listIndexes object: collection arguments: timeoutMS: 0 expectEvents: - client: client events: - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: listIndexes databaseName: databaseName command: listIndexes: collectionName maxTimeMS: { $$exists: false } - description: "timeoutMS applies to whole operation, not individual attempts - createChangeStream on collection" runOnRequirements: - minServerVersion: "4.4" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 4 } data: failCommands: ["aggregate"] blockConnection: true blockTimeMS: 60 errorCode: 7 errorLabels: ["RetryableWriteError"] - name: createChangeStream object: collection arguments: pipeline: [] expectError: isTimeoutError: true - description: "operation is retried multiple times for non-zero timeoutMS - createChangeStream on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: createChangeStream object: collection arguments: timeoutMS: 500 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$type: ["int", "long"] } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$type: ["int", "long"] } - description: "operation is retried multiple times if timeoutMS is zero - createChangeStream on collection" operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: ["aggregate"] errorCode: 7 closeConnection: false errorLabels: ["RetryableWriteError"] - name: createChangeStream object: collection arguments: timeoutMS: 0 pipeline: [] expectEvents: - client: client events: - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: aggregate databaseName: databaseName command: aggregate: collectionName maxTimeMS: { $$exists: false }	87.45 KB	2025-05-25 12:27
📄 runCursorCommand.json { "description": "runCursorCommand", "schemaVersion": "1.9", "runOnRequirements": [ { "minServerVersion": "4.4" } ], "createEntities": [ { "client": { "id": "failPointClient", "useMultipleMongoses": false } }, { "client": { "id": "commandClient", "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent", "commandSucceededEvent" ] } }, { "client": { "id": "client", "useMultipleMongoses": false, "observeEvents": [ "commandStartedEvent" ], "ignoreCommandMonitoringEvents": [ "killCursors" ] } }, { "database": { "id": "commandDb", "client": "commandClient", "databaseName": "commandDb" } }, { "database": { "id": "db", "client": "client", "databaseName": "db" } }, { "collection": { "id": "collection", "database": "db", "collectionName": "collection" } } ], "initialData": [ { "collectionName": "collection", "databaseName": "db", "documents": [ { "_id": 1, "x": 11 }, { "_id": 2, "x": 22 }, { "_id": 3, "x": 33 }, { "_id": 4, "x": 44 }, { "_id": 5, "x": 55 } ] } ], "tests": [ { "description": "errors if timeoutMode is set without timeoutMS", "operations": [ { "name": "runCursorCommand", "object": "db", "arguments": { "commandName": "find", "command": { "find": "collection" }, "timeoutMode": "cursorLifetime" }, "expectError": { "isClientError": true } } ] }, { "description": "error if timeoutMode is cursorLifetime and cursorType is tailableAwait", "operations": [ { "name": "runCursorCommand", "object": "db", "arguments": { "commandName": "find", "command": { "find": "collection" }, "timeoutMode": "cursorLifetime", "cursorType": "tailableAwait" }, "expectError": { "isClientError": true } } ] }, { "description": "Non-tailable cursor lifetime remaining timeoutMS applied to getMore if timeoutMode is unset", "runOnRequirements": [ { "serverless": "forbid" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 2 }, "data": { "failCommands": [ "find", "getMore" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "runCursorCommand", "object": "db", "arguments": { "commandName": "find", "timeoutMS": 100, "command": { "find": "collection", "batchSize": 2 } }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "command": { "find": "collection", "maxTimeMS": { "$$type": [ "int", "long" ] } } } }, { "commandStartedEvent": { "commandName": "getMore", "command": { "getMore": { "$$type": [ "int", "long" ] }, "collection": "collection", "maxTimeMS": { "$$exists": true } } } } ] } ] }, { "description": "Non=tailable cursor iteration timeoutMS is refreshed for getMore if timeoutMode is iteration - failure", "runOnRequirements": [ { "serverless": "forbid" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "getMore" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "runCursorCommand", "object": "db", "arguments": { "commandName": "find", "command": { "find": "collection", "batchSize": 2 }, "timeoutMode": "iteration", "timeoutMS": 100, "batchSize": 2 }, "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "find", "databaseName": "db", "command": { "find": "collection", "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "getMore", "databaseName": "db", "command": { "getMore": { "$$type": [ "int", "long" ] }, "collection": "collection", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "Tailable cursor iteration timeoutMS is refreshed for getMore - failure", "runOnRequirements": [ { "serverless": "forbid" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "getMore" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "dropCollection", "object": "db", "arguments": { "collection": "cappedCollection" } }, { "name": "createCollection", "object": "db", "arguments": { "collection": "cappedCollection", "capped": true, "size": 4096, "max": 3 }, "saveResultAsEntity": "cappedCollection" }, { "name": "insertMany", "object": "cappedCollection", "arguments": { "documents": [ { "_id": 1, "x": 11 }, { "_id": 2, "x": 22 } ] } }, { "name": "createCommandCursor", "object": "db", "arguments": { "commandName": "find", "command": { "find": "cappedCollection", "batchSize": 1, "tailable": true }, "timeoutMode": "iteration", "timeoutMS": 100, "batchSize": 1, "cursorType": "tailable" }, "saveResultAsEntity": "tailableCursor" }, { "name": "iterateUntilDocumentOrError", "object": "tailableCursor" }, { "name": "iterateUntilDocumentOrError", "object": "tailableCursor", "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "drop" } }, { "commandStartedEvent": { "commandName": "create" } }, { "commandStartedEvent": { "commandName": "insert" } }, { "commandStartedEvent": { "commandName": "find", "databaseName": "db", "command": { "find": "cappedCollection", "tailable": true, "awaitData": { "$$exists": false }, "maxTimeMS": { "$$exists": false } } } }, { "commandStartedEvent": { "commandName": "getMore", "databaseName": "db", "command": { "getMore": { "$$type": [ "int", "long" ] }, "collection": "cappedCollection", "maxTimeMS": { "$$exists": false } } } } ] } ] }, { "description": "Tailable cursor awaitData iteration timeoutMS is refreshed for getMore - failure", "runOnRequirements": [ { "serverless": "forbid" } ], "operations": [ { "name": "failPoint", "object": "testRunner", "arguments": { "client": "failPointClient", "failPoint": { "configureFailPoint": "failCommand", "mode": { "times": 1 }, "data": { "failCommands": [ "getMore" ], "blockConnection": true, "blockTimeMS": 60 } } } }, { "name": "dropCollection", "object": "db", "arguments": { "collection": "cappedCollection" } }, { "name": "createCollection", "object": "db", "arguments": { "collection": "cappedCollection", "capped": true, "size": 4096, "max": 3 }, "saveResultAsEntity": "cappedCollection" }, { "name": "insertMany", "object": "cappedCollection", "arguments": { "documents": [ { "foo": "bar" }, { "fizz": "buzz" } ] } }, { "name": "createCommandCursor", "object": "db", "arguments": { "command": { "find": "cappedCollection", "tailable": true, "awaitData": true }, "cursorType": "tailableAwait", "batchSize": 1 }, "saveResultAsEntity": "tailableCursor" }, { "name": "iterateUntilDocumentOrError", "object": "tailableCursor" }, { "name": "iterateUntilDocumentOrError", "object": "tailableCursor", "expectError": { "isTimeoutError": true } } ], "expectEvents": [ { "client": "client", "events": [ { "commandStartedEvent": { "commandName": "drop" } }, { "commandStartedEvent": { "commandName": "create" } }, { "commandStartedEvent": { "commandName": "insert" } }, { "commandStartedEvent": { "commandName": "find", "databaseName": "db", "command": { "find": "cappedCollection", "tailable": true, "awaitData": true, "maxTimeMS": { "$$exists": true } } } }, { "commandStartedEvent": { "commandName": "getMore", "databaseName": "db", "command": { "getMore": { "$$type": [ "int", "long" ] }, "collection": "cappedCollection" } } } ] } ] } ] }	13.86 KB	2025-05-25 12:27
📄 runCursorCommand.yml description: runCursorCommand schemaVersion: '1.9' runOnRequirements: - minServerVersion: "4.4" createEntities: - client: id: &failPointClient failPointClient useMultipleMongoses: false - client: id: &commandClient commandClient useMultipleMongoses: false observeEvents: [commandStartedEvent, commandSucceededEvent] - client: id: &client client useMultipleMongoses: false observeEvents: [commandStartedEvent] ignoreCommandMonitoringEvents: [killCursors] - database: # For tests that need success event assertions id: &commandDb commandDb client: commandClient databaseName: commandDb - database: id: &db db client: client databaseName: db - collection: id: &collection collection database: db collectionName: collection initialData: - collectionName: collection databaseName: db documents: &documents - { _id: 1, x: 11 } - { _id: 2, x: 22 } - { _id: 3, x: 33 } - { _id: 4, x: 44 } - { _id: 5, x: 55 } tests: - description: errors if timeoutMode is set without timeoutMS operations: - name: runCursorCommand object: db arguments: commandName: find command: { find: collection } timeoutMode: cursorLifetime expectError: isClientError: true - description: error if timeoutMode is cursorLifetime and cursorType is tailableAwait operations: - name: runCursorCommand object: db arguments: commandName: find command: { find: collection } timeoutMode: cursorLifetime cursorType: tailableAwait expectError: isClientError: true # If timeoutMode is unset, it should default to CURSOR_LIFETIME and the time remaining after the find succeeds should be applied to the getMore - description: Non-tailable cursor lifetime remaining timeoutMS applied to getMore if timeoutMode is unset runOnRequirements: - serverless: forbid operations: # Block find/getMore for 15ms. - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 2 } data: failCommands: [find, getMore] blockConnection: true blockTimeMS: 60 # Run a find with timeoutMS less than double our failPoint blockTimeMS and # batchSize less than the total document count will cause a find and a getMore to be sent. # Both will block for 60ms so together they will go over the timeout. - name: runCursorCommand object: db arguments: commandName: find timeoutMS: 100 command: { find: collection, batchSize: 2 } expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: find command: find: collection maxTimeMS: { $$type: [int, long] } - commandStartedEvent: commandName: getMore command: getMore: { $$type: [int, long] } collection: collection maxTimeMS: { $$exists: true } # If timeoutMode=ITERATION, timeoutMS applies separately to the initial find and the getMore on the cursor. Neither # command should have a maxTimeMS field. This is a failure test. The "find" inherits timeoutMS=100 and "getMore" # commands are blocked for 60ms, causing iteration to fail with a timeout error. - description: Non=tailable cursor iteration timeoutMS is refreshed for getMore if timeoutMode is iteration - failure runOnRequirements: - serverless: forbid operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["getMore"] blockConnection: true blockTimeMS: 60 - name: runCursorCommand object: db arguments: commandName: find command: { find: collection, batchSize: 2 } timeoutMode: iteration timeoutMS: 100 batchSize: 2 expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: find databaseName: db command: find: collection maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: getMore databaseName: db command: getMore: { $$type: ["int", "long"] } collection: collection maxTimeMS: { $$exists: false } # The timeoutMS option should apply separately to the initial "find" and each getMore. This is a failure test. The # find inherits timeoutMS=100 from the collection and the getMore command blocks for 60ms, causing iteration to fail # with a timeout error. - description: Tailable cursor iteration timeoutMS is refreshed for getMore - failure runOnRequirements: - serverless: forbid operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["getMore"] blockConnection: true blockTimeMS: 60 - name: dropCollection object: db arguments: collection: &cappedCollection cappedCollection - name: createCollection object: db arguments: collection: cappedCollection capped: true size: 4096 max: 3 saveResultAsEntity: cappedCollection - name: insertMany object: cappedCollection arguments: documents: - { _id: 1, x: 11 } - { _id: 2, x: 22 } - name: createCommandCursor object: db arguments: commandName: find command: { find: cappedCollection, batchSize: 1, tailable: true } timeoutMode: iteration timeoutMS: 100 batchSize: 1 cursorType: tailable saveResultAsEntity: &tailableCursor tailableCursor # Iterate the cursor twice: the first iteration will return the document from the batch in the find and the # second will do a getMore. - name: iterateUntilDocumentOrError object: tailableCursor - name: iterateUntilDocumentOrError object: tailableCursor expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: drop - commandStartedEvent: commandName: create - commandStartedEvent: commandName: insert - commandStartedEvent: commandName: find databaseName: db command: find: cappedCollection tailable: true awaitData: { $$exists: false } maxTimeMS: { $$exists: false } - commandStartedEvent: commandName: getMore databaseName: db command: getMore: { $$type: ["int", "long"] } collection: cappedCollection maxTimeMS: { $$exists: false } # The timeoutMS value should be refreshed for getMore's. This is a failure test. The find inherits timeoutMS=10 from # the collection and the getMore blocks for 15ms, causing iteration to fail with a timeout error. - description: Tailable cursor awaitData iteration timeoutMS is refreshed for getMore - failure runOnRequirements: - serverless: forbid operations: - name: failPoint object: testRunner arguments: client: failPointClient failPoint: configureFailPoint: failCommand mode: { times: 1 } data: failCommands: ["getMore"] blockConnection: true blockTimeMS: 60 - name: dropCollection object: db arguments: collection: &cappedCollection cappedCollection - name: createCollection object: db arguments: collection: cappedCollection capped: true size: 4096 max: 3 saveResultAsEntity: cappedCollection - name: insertMany object: cappedCollection arguments: documents: [ { foo: bar }, { fizz: buzz } ] - name: createCommandCursor object: db arguments: command: { find: cappedCollection, tailable: true, awaitData: true } cursorType: tailableAwait batchSize: 1 saveResultAsEntity: &tailableCursor tailableCursor # Iterate twice to force a getMore. - name: iterateUntilDocumentOrError object: tailableCursor - name: iterateUntilDocumentOrError object: tailableCursor expectError: isTimeoutError: true expectEvents: - client: client events: - commandStartedEvent: commandName: drop - commandStartedEvent: commandName: create - commandStartedEvent: commandName: insert - commandStartedEvent: commandName: find databaseName: db command: find: cappedCollection tailable: true awaitData: true maxTimeMS: { $$exists: true } - commandStartedEvent: commandName: getMore databaseName: db command: getMore: { $$type: ["int", "long"] } collection: cappedCollection	9.98 KB	2025-05-25 12:27

Edit File:

Terminal