Wala shell

Advanced PHP File Manager

Server IP: 127.0.0.1 | PHP Version: 8.3.30 | Domains Hosted: 54

Name	Size	Last Modified
📁 ..	-	2026-03-21 15:45
📄 macros.aaa-pyproject-srpm # This file is called macros.aaa-pyproject-srpm # to sort alphabetically before macros.pyproject. # When this file is installed but macros.pyproject is not # this macro will cause the package with the real macro to be installed. # When macros.pyproject is installed, it overrides this macro. # Note: This needs to maintain the same set of options as the real macro. %pyproject_buildrequires(rRxtNwpe:g:C:) echo 'pyproject-rpm-macros' && exit 0 # Declarative buildsystem, requires RPM 4.20+ to work # https://rpm-software-management.github.io/rpm/manual/buildsystem.html # This is the minimal implementation to be in the srpm package, # as required even before the BuildRequires are installed %buildsystem_pyproject_conf() %nil %buildsystem_pyproject_generate_buildrequires() %pyproject_buildrequires %* %buildsystem_pyproject_build() %nil %buildsystem_pyproject_install() %nil	879 B	2025-03-13 07:58
📄 macros.alt-python311 %__alt_python311 /opt/alt/python311/bin/python3 %alt_python311_sitelib %(%{__alt_python311} -Ic "from distutils.sysconfig import get_python_lib; print(get_python_lib())") %alt_python311_sitearch %(%{__alt_python311} -Ic "from distutils.sysconfig import get_python_lib; print(get_python_lib(True))") %alt_python311_version %(%{__alt_python311} -Ic "import sys; sys.stdout.write(sys.version[:3])") %alt_python311_version_nodots %(%{__alt_python311} -Ic "import sys; sys.stdout.write(sys.version[:3].replace('.',''))") %alt_py311dir %{_builddir}/python3-%{name}-%{version}-%{release} %alt_python311_dir /opt/alt/python311 %py_setup setup.py %alt_py311_shbang_opts -s %alt_py311_shbang_opts_nodash %(opts=%{alt_py311_shbang_opts}; echo ${opts#-}) # Use the slashes after expand so that the command starts on the same line as # the macro %alt_py311_build() %{expand:\\\ CFLAGS="${CFLAGS:-${RPM_OPT_FLAGS}}" LDFLAGS="${LDFLAGS:-${RPM_LD_FLAGS}}"\\\ %{__alt_python311} %{py_setup} %{?py_setup_args} build --executable="%{__alt_python311} %{alt_py311_shbang_opts}" %{?} } %alt_py311_build_egg() %{expand:\\\ CFLAGS="${CFLAGS:-${RPM_OPT_FLAGS}}" LDFLAGS="${LDFLAGS:-${RPM_LD_FLAGS}}"\\\ %{__alt_python311} %{py_setup} %{?py_setup_args} bdist_egg %{?} } %alt_py311_build_wheel() %{expand:\\\ CFLAGS="${CFLAGS:-${RPM_OPT_FLAGS}}" LDFLAGS="${LDFLAGS:-${RPM_LD_FLAGS}}"\\\ %{__alt_python311} %{py_setup} %{?py_setup_args} bdist_wheel %{?} } %alt_py311_install() %{expand:\\\ CFLAGS="${CFLAGS:-${RPM_OPT_FLAGS}}" LDFLAGS="${LDFLAGS:-${RPM_LD_FLAGS}}"\\\ %{__alt_python311} %{py_setup} %{?py_setup_args} install -O1 --skip-build --root %{buildroot} %{?} } %alt_py311_install_egg() %{expand:\\\ mkdir -p %{buildroot}%{alt_python311_sitelib} %{alt_python311_dir}/bin/easy_install-3.11 -m --prefix %{buildroot}%{_prefix} -Z dist/-py3.11.egg %{?} %{alt_python311_dir}/bin/easy_install-3.11 %{alt_python311_locate}/bin/easy_install-3.11 } %alt_py311_install_wheel() %{expand:\\\ %{alt_python311_dir}/bin/pip3.11 install -I dist/%{1} --root %{buildroot} --no-deps }	2.03 KB	2026-01-07 23:16
📄 macros.cmake # # Macros for cmake # %_cmake_lib_suffix64 -DLIB_SUFFIX=64 %_cmake_shared_libs -DBUILD_SHARED_LIBS:BOOL=ON %_cmake_skip_rpath -DCMAKE_SKIP_RPATH:BOOL=ON %_cmake_version 3.26.5 %__cmake /usr/bin/cmake %__ctest /usr/bin/ctest %__cmake_builddir %{!?__cmake_in_source_build:%{_vpath_builddir}}%{?__cmake_in_source_build:.} # - Set default compile flags # - CMAKE__FLAGS_RELEASE are added after* the FLAGS environment variables # and default to -O3 -DNDEBUG. Strip the -O3 so we can override with FLAGS # - Turn on verbose makefiles so we can see and verify compile flags # - Turn off stripping by default so RPM can do it separately # - Set default install prefixes and library install directories # - Turn on shared libraries by default %cmake \ %if 0%{?set_build_flags:1} \ %set_build_flags \ %else \ CFLAGS="${CFLAGS:-%optflags}" ; export CFLAGS ; \ CXXFLAGS="${CXXFLAGS:-%optflags}" ; export CXXFLAGS ; \ FFLAGS="${FFLAGS:-%optflags%{?_fmoddir: -I%_fmoddir}}" ; export FFLAGS ; \ FCFLAGS="${FCFLAGS:-%optflags%{?_fmoddir: -I%_fmoddir}}" ; export FCFLAGS ; \ %{?__global_ldflags:LDFLAGS="${LDFLAGS:-%__global_ldflags}" ; export LDFLAGS ;} \ %endif \ %__cmake \\\ %{!?__cmake_in_source_build:-S "%{_vpath_srcdir}"} \\\ %{!?__cmake_in_source_build:-B "%{__cmake_builddir}"} \\\ -DCMAKE_C_FLAGS_RELEASE:STRING="-DNDEBUG" \\\ -DCMAKE_CXX_FLAGS_RELEASE:STRING="-DNDEBUG" \\\ -DCMAKE_Fortran_FLAGS_RELEASE:STRING="-DNDEBUG" \\\ -DCMAKE_VERBOSE_MAKEFILE:BOOL=ON \\\ -DCMAKE_INSTALL_DO_STRIP:BOOL=OFF \\\ -DCMAKE_INSTALL_PREFIX:PATH=%{_prefix} \\\ -DINCLUDE_INSTALL_DIR:PATH=%{_includedir} \\\ -DLIB_INSTALL_DIR:PATH=%{_libdir} \\\ -DSYSCONF_INSTALL_DIR:PATH=%{_sysconfdir} \\\ -DSHARE_INSTALL_PREFIX:PATH=%{_datadir} \\\ %if "%{?_lib}" == "lib64" \ %{?_cmake_lib_suffix64} \\\ %endif \ %{?_cmake_shared_libs} %cmake_build \ %__cmake --build "%{__cmake_builddir}" %{?_smp_mflags} --verbose %cmake_install \ DESTDIR="%{buildroot}" %__cmake --install "%{__cmake_builddir}" %ctest(:-:) \ cd "%{__cmake_builddir}" \ %__ctest --output-on-failure --force-new-ctest-process %{?_smp_mflags} %{} \ cd - %cmake3 %cmake %cmake3_build %cmake_build %cmake3_install %cmake_install %ctest3(:-:) %ctest %{}	2.28 KB	2026-01-28 08:25
📄 macros.dist # dist macros. %__bootstrap ~bootstrap %cloudlinux_ver 9 %cloudlinux 9 %centos_ver 9 %centos 9 %rhel 9 %dist %{!?distprefix0:%{?distprefix}}%{expand:%{lua:for i=0,9999 do print("%{?distprefix" .. i .."}") end}}.el9%{?with_bootstrap:~bootstrap} %el9 1	252 B	2025-11-11 13:37
📄 macros.dwz # Macros for reducing debug info size using dwz(1) utility. # The two default values below should result in dwz taking at most # 3GB of RAM or so on 64-bit hosts and 2.5GB on 32-bit hosts # on the largest .debug files (in mid 2012 those are # libreoffice-debuginfo, debuginfos containing # libxul.so.debug and libwebkitgtk-.so..debug). # This needs to be tuned based on the amount of available RAM # on build boxes for each architecture as well as virtual address # space limitations if dwz is 32-bit program. While it needs less # memory than 64-bit program because pointers are smaller, it can # never have more than 4GB-epsilon of RAM and on some architecture # even less than that (e.g. 2GB). # Number of debugging information entries (DIEs) above which # dwz will stop considering file for multifile optimizations # and enter a low memory mode, in which it will optimize # in about half the memory needed otherwise. %_dwz_low_mem_die_limit 10000000 # Number of DIEs above which dwz will stop processing # a file altogether. %_dwz_max_die_limit 50000000 # On x86_64 increase the higher limit to make libwebkit optimizable. # libwebkit* in mid 2012 contains roughly 87mil DIEs, and 64-bit # dwz is able to optimize it from ~1.1GB to ~410MB using 5.2GB of RAM. %_dwz_max_die_limit_x86_64 110000000 # On ARM, build boxes often have only 512MB of RAM and are very slow. # Lower both the limits. %_dwz_low_mem_die_limit_armv5tel 4000000 %_dwz_low_mem_die_limit_armv7hl 4000000 %_dwz_max_die_limit_armv5tel 10000000 %_dwz_max_die_limit_armv7hl 10000000 %_dwz_limit() %{expand:%%{?%{1}_%{_arch}}%%{!?%{1}_%{_arch}:%%%{1}}} %_find_debuginfo_dwz_opts --run-dwz\\\ --dwz-low-mem-die-limit %{_dwz_limit _dwz_low_mem_die_limit}\\\ --dwz-max-die-limit %{_dwz_limit _dwz_max_die_limit}	1.76 KB	2025-10-30 10:48
📄 macros.efi-srpm # # EFI specific SRPM macro definitions # # Copyright 2018 Peter M Jones <pjones@redhat.com> # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or (at # your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <https://www.gnu.org/licenses/>. # %_efi_srpm_macros_setup() %{expand:%{lua: -- test if our arch matches local function arch(archmacro) local target = rpm.expand(" %{_target_cpu} ") local arches = rpm.expand(" " .. archmacro .. " ") local match = string.match(arches, target) return (match ~= nil) end -- give us the arch... local function getarch() if arch("ia64") then return("ia64") elseif arch("x86_64") then return("x64") elseif arch("%{ix86}") then return("ia32") elseif arch("aarch64") then return("aa64") elseif arch("%{arm}") then return("arm") else return("none") end end -- alt arch local function getaltarch() return("none") end -- make some macros local done = rpm.expand("%{?_efi}") if done == nil or done == "" then local arch = getarch() local alt = getaltarch() print("%global _efi x86_64 aarch64 armv3l armv4b armv4l armv4tl armv5tl armv5tel armv5tejl armv6l armv6hl armv7l armv7hl armv7hnl armv8l armv8hl armv8hnl armv8hcnl i386 i486 i586 i686 pentium3 pentium4 athlon geode\\n") print("%global _efi_vendor almalinux\\n") if arch == "none" then print("%global _efi_has_arch 0\\n") else print("%global _efi_has_arch 1\\n") end print("%global _efi_arch " .. getarch() .. "\\n") print("%global _efi_arch_upper " .. string.upper(getarch()) .. "\\n") if alt == "none" then print("%global _efi_has_alt_arch 0\\n") else print("%global _efi_has_alt_arch 1\\n") end print("%global _efi_alt_arch " .. alt .. "\\n") print("%global _efi_alt_arch_upper " .. string.upper(alt) .. "\\n") end }} %efi_srpm_macros_version %{expand:%{_efi_srpm_macros_setup}}6 %efi %{expand:%{_efi_srpm_macros_setup}}%{expand:%{_efi}} %efi_vendor %{expand:%{_efi_srpm_macros_setup}}%{expand:%{_efi_vendor}} %efi_esp_root /boot/efi %efi_esp_efi %{efi_esp_root}/EFI %efi_esp_boot %{efi_esp_efi}/BOOT %efi_esp_dir %{expand:%{_efi_srpm_macros_setup}}%{efi_esp_efi}/%{efi_vendor} %efi_arch %{expand:%{_efi_srpm_macros_setup}}%{_efi_arch} %efi_arch_upper %{expand:%{_efi_srpm_macros_setup}}%{_efi_arch_upper} %efi_has_arch %{expand:%{_efi_srpm_macros_setup}}0%{_efi_has_arch} %efi_has_alt_arch %{expand:%{_efi_srpm_macros_setup}}0%{_efi_has_alt_arch} %efi_alt_arch %{expand:%{_efi_srpm_macros_setup}}%{?_efi_alt_arch}%{nil} %efi_alt_arch_upper %{expand:%{_efi_srpm_macros_setup}}%{?_efi_alt_arch_upper}%{nil} %efi_build_requires bash coreutils %__brp_boot_efi_times /usr/lib/rpm/brp-boot-efi-times	3.19 KB	2025-09-17 07:08
📄 macros.environment-modules # RPM macros for environment modules %_modulesdir %{_datadir}/modulefiles	75 B	2023-05-14 17:11
📄 macros.fedora-misc # Fedora macros, safe to use after the SRPM build stage # Lists files matching inclusion globs, excluding files matching exclusion # globs # – globs are space-separated lists of shell globs. Such lists require # %{quote:} use when passed as rpm arguments or flags. # Control variables, flags and arguments: # %{listfiles_include} inclusion globs # %{listfiles_exclude} exclusion globs # -i <globs> inclusion globs # -x <globs> exclusion globs # … arguments passed to the macro without flags will be # interpreted as inclusion globs %listfiles(i:x:) %{expand: %if %{lua: print(string.len(rpm.expand("%{?-i}%{?listfiles_include}%")))} listfiles_include=$(realpath -e --relative-base=. %{?-i} %{?listfiles_include} % \| sort -u) %if %{lua: print(string.len(rpm.expand("%{?-x}%{?listfiles_exclude}")))} while IFS= read -r finc ; do realpath -qe --relative-base=. %{?-x} %{?listfiles_exclude} \\ \| sort -u \| grep -q "${finc}" \|\| echo "${finc}" done <<< "${listfiles_include}" %else echo "${listfiles_include}" %endif %endif } # https://github.com/rpm-software-management/rpm/issues/581 # Writes the contents of a list of rpm variables to a macro file # Control variables, flags and arguments: # -f <filename> the macro file to process: # – it must contain corresponding anchors # – for example %writevars -f myfile foo bar will replace: # @@FOO@@ with the rpm evaluation of %{foo} and # @@BAR@@ with the rpm evaluation of %{bar} # in myfile %writevars(f:) %{lua: local fedora = require "fedora.common" local macrofile = rpm.expand("%{-f}") local rpmvars = {} for i = 1, rpm.expand("%#") do table.insert(rpmvars, rpm.expand("%" .. i)) end fedora.writevars(macrofile,rpmvars) } # gpgverify verifies signed sources. There is documentation in the script. %gpgverify(k:s:d:) %{lua: local script = rpm.expand("%{_rpmconfigdir}/redhat/gpgverify ") local keyring = rpm.expand("%{-k}") local signature = rpm.expand("%{-s}") local data = rpm.expand("%{-d}") print(script) if keyring ~= "" then print(rpm.expand("--keyring='%{SOURCE" .. keyring .. "}' ")) end if signature ~= "" then print(rpm.expand("--signature='%{SOURCE" .. signature .. "}' ")) end if data ~= "" then print(rpm.expand("--data='%{SOURCE" .. data .. "}' ")) end }	2.42 KB	2025-10-30 10:48
📄 macros.fedora-misc-srpm # Fedora macros, safe to use at SRPM build stage # A directory for rpm macros %rpmmacrodir /usr/lib/rpm/macros.d # A directory for appdata metainfo. This has changed between releases so a # macro is useful. %_metainfodir %{_datadir}/metainfo # A directory for SWID tag files describing the installation %_swidtagdir %{_prefix}/lib/swidtag/fedoraproject.org # Applies the fedora.wordwrap filter to the content of an rpm variable, and # prints the result. # – putting multiple lines of UTF-8 text inside a variable is usually # accomplished with %{expand:some_text} # Control variables, flags and arguments: # -v <variable_name> (default value: _description) %wordwrap(v:) %{lua: local fedora = require "fedora.common" local variable = "%{?" .. rpm.expand("%{-v*}%{!-v:_description}") .. "}" print(fedora.wordwrap(variable)) } # A single Name: and %package substitute # Control variables, flags and arguments: # %{source_name} the SRPM name # %{source_summary} the SRPM summary # %{source_description} the SRPM description # -n <name> declare a package named <name> # (%package-like behavior) # -v be verbose # %1 declare a package named %{source_name}-%{%1} # (%package-like behavior) %new_package(n:v) %{lua: local fedora = require "fedora.common" local pkg_name = fedora.readflag("n") local verbose = fedora.hasflag("v") local name_suffix = fedora.read("1") local source_name = fedora.read("source_name") local first = not ( fedora.read("name") or fedora.read("currentname") ) fedora.new_package(source_name, pkg_name, name_suffix, first, verbose) }	1.68 KB	2025-10-30 10:48
📄 macros.firewalld # RPM macros for packages installing firewalld services/zones # put this into %post otherwise firewalld won't load new service/zone file %firewalld_reload() \ test -x %{_bindir}/firewall-cmd && firewall-cmd --reload --quiet \|\| : \ %{nil}	239 B	2026-03-10 23:36
📄 macros.fonts-srpm # Copyright © 2008-2019 Nicolas Mailhot <nim@fedoraproject.org> # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <https://www.gnu.org/licenses/>. # RPM macros for fonts packages. # # SPDX-License-Identifier: GPL-3.0-or-later ## Default directories # Font installation directory root %_fontbasedir /usr/share/fonts # Master fontconfig configuration directory # Only needed to avoid a circular directory dependency with the fontconfig # package — you should not use this in fonts packages %_fontconfig_masterdir /etc/fonts # Fontconfig directory for active configuration snippets %_fontconfig_confdir /etc/fonts/conf.d # Fontconfig configuration template directory # Templates are activated by symlinking in _fontconfig_confdir %_fontconfig_templatedir /usr/share/fontconfig/conf.avail # Default contact in font appstream files # Override in your spec file if it does not apply %fontcontact fonts@lists.fedoraproject.org # Default org in font appstream files # Override in your spec file if it does not apply %fontorg org.fedoraproject # Sanitize a font family name that can then serve as rpm package name # Mandatory parameter: a font family name %fontrpmname() %{lua: local fonts = require "fedora.srpm.fonts" print(fonts.rpmname(rpm.expand("%1"))) } # Computes rpm variables associated with a font sub(package) # There should be no reason to call this macro directly. Arguments: # -z <number> read the zth block of definitions, for example # %{fontfamily<number>} # -a process all blocks in one go, instead of using separate # -z calls # -v be verbose # -f "<shell globs>" font files to include. Alternatively, set %{fonts<number>} # -F "<shell globs>" font files to exclude. Alternatively, set %{fontsex<number>} # -c "<shell globs>" fontconfig files to include. Alternatively, set %{fontconfs<number>} # -C "<shell globs>" fontconfig files to exclude. Alternatively, set %{fontconfsex<number>} # -s "<shell globs>" font appstream files to include. Alternatively, set %{fontappstreams<number>} # -S "<shell globs>" font appstream files to exclude. Alternatively, set %{fontappstreamsex<number>} # -d "<shell globs>" documentation files to include. Alternatively, set %{fontdocs<number>} # -D "<shell globs>" documentation files to exclude. Alternatively, set %{fontdocsex<number>} # -l "<shell globs>" licensing files to include. Alternatively, set %{fontlicenses<number>} # -L "<shell globs>" licensing files to exclude. Alternatively, set %{fontlicensesex<number>} %fontenv(z:vf:F:c:C:s:S:d:D:l:L:) %{lua: local fonts = require "fedora.srpm.fonts" local suffix = rpm.expand("%{?-z}") local verbose = (rpm.expand("%{-v}") ~= "") local globvalues = {} for g,_ in pairs(fonts.globargs) do globvalues[g] = rpm.expand("%{?-" .. fonts.globargs[g] .. "}") end fonts.env(suffix, verbose, globvalues) } # Create a font (sub)package header. Arguments: # -z <number> read the zth block of definitions, for example # %{fontfamily<number>} # -a process all blocks in one go, instead of using separate # -z calls # -v be verbose # -m force main header creation # -s force sub header creation # by itself the macro assumes the zero or nil suffix block # corresponds to the main package header %fontpkg(z:avms) %{lua: local fonts = require "fedora.srpm.fonts" local suffix = rpm.expand("%{?-z}") local processall = (rpm.expand("%{-a}") ~= "") and (rpm.expand("%{-z}") == "") local verbose = (rpm.expand("%{-v}") ~= "") local forcemain = (rpm.expand("%{-m}") ~= "") local forcesub = (rpm.expand("%{-s}") ~= "") fonts.pkg(forcemain, forcesub, suffix, processall, verbose) } # Create a font (sub)metapackage header. Optional arguments: # -n <name> use <name> as metapackage name # -s <variable> use the content of <variable> as metapackage summary # -d <variable> use the content of <variable> as metapackage description # -z "<numbers>" restrict metapackaging to <numbers> comma-separated list of # font package suffixes %fontmetapkg(n:s:d:z:) %{lua: local fonts = require "fedora.srpm.fonts" local name = rpm.expand("%{?-n}") local summary = rpm.expand("%{?-s}") if (summary ~= "") then summary = "%{" .. summary .. "}" end local description = rpm.expand("%{?-d}") if (description ~= "") then description = "%{" .. description .. "}" end local suffixes = rpm.expand("%{?-z*}") fonts.metapkg(name, summary, description, suffixes) }	5.17 KB	2022-02-12 03:59
📄 macros.forge # Computes forge-related variables for use in the rest of the spec file # Control variables, flags and arguments: # %{forgeurl<number>} the project url on the target forge # %{tag<number>} the packaged tag, OR # %{commit<number>} the packaged commit, OR # %{version<number>} the packaged version # – %{version}/%{version0} are set via: # Version: # – because git is lacking a built-in version # reference, %{version<number>} will be translated # into %{tag<number>} using unreliable heuristics; # set %{tag<number>} directly if those fail # %{date<number>} the packaged timestamp # … %forgemeta will compute a huge number of variables: # — the packager can override it by setting some of # those before the %forgemeta call # – use the -i flag to list those variables # -z <number> only process the zth block of definitions # "" for the no-suffix block # -i list the resulting variable values # -s silently ignore problems in %{forgeurl<number>} # -v be verbose # -a process all sources in one go, instead of using # separate -z calls %forgemeta(z:isva) %{lua: local fedora = require "fedora.common" local forge = require "fedora.srpm.forge" local verbose = rpm.expand("%{-v}") ~= "" local informative = rpm.expand("%{-i}") ~= "" local silent = rpm.expand("%{-s}") ~= "" local processall = (rpm.expand("%{-a}") ~= "") and (rpm.expand("%{-z}") == "") if processall then for _,s in pairs(fedora.getsuffixes("forgeurl")) do forge.meta(s,verbose,informative,silent) end else forge.meta(rpm.expand("%{-z}"),verbose,informative,silent) end } # Unpacks sources computed by %forgemeta # Control variables, flags and arguments: # %{forgesource<number>} the source archive that will be processed # %{forgesetupargs<number>} %setup arguments # -z <number> only process the zth block of definitions # "" for the no-suffix block # -v be verbose # -a process all sources in one go, instead of using # separate -z calls %forgesetup(z:va) %{lua: local fedora = require "fedora.common" if (rpm.expand("%{-z}") == "") and (rpm.expand("%{-a}") ~= "") then for _,s in pairs(fedora.getsuffixes("forgesetupargs")) do print(rpm.expand("%setup %{!-v:-q} %{?forgesetupargs" .. s .. "}\\n")) end else print( rpm.expand("%setup %{!-v:-q} %{?forgesetupargs" .. rpm.expand("%{-z}") .. "}\\n")) end } # Calls %autosetup using %forgemeta results # – this will probably be removed since it is unsafe in presence of multiple # sources # Control variables, flags and arguments: # -z <number> process the zth block of definitions # -v -N -S -p relayed to %autosetup %forgeautosetup(z:vNS:p:q) %{lua: print(rpm.expand("%autosetup %{-v} %{-N} %{?-S} %{?-p} %{?forgesetupargs" .. rpm.expand("%{-z*}") .. "}\\n")) }	3.25 KB	2025-10-30 10:48
📄 macros.ghc-srpm # Macros needed for building srpms of Haskell packages # from ghc-7.8 ghci is supported on all arch's # former archs: armv5tel ppc sparcv9 %ghc_arches_with_ghci %{ix86} x86_64 armv7hl ppc64 ppc64le aarch64 s390 s390x %{mips} # ghc_arches is not used in current packages but still here for back compat # former archs: alpha ppc sparcv9 armv5tel %ghc_arches %{ix86} x86_64 armv7hl ppc64 ppc64le aarch64 s390 s390x # control whether to BR devel or prof library packages # (prof subpackages were introduced in F31) %ghc_devel_prof prof	535 B	2022-01-30 15:59
📄 macros.go-srpm # Copyright © 2015-2019 Jakub Cajka <jcajka@redhat.com>, # Jan Chaloupka <jchaloup@redhat.com>, # Nicolas Mailhot <nim@fedoraproject.org> # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <https://www.gnu.org/licenses/>. # # This file contains macros for building projects in golang for packages # with golang compiler or gcc-go compiler based on an architecture. # Golang is primarly for primary architectures, gcc-go for secondary. # # This file provides only macros and must not use any other package except # redhat-rpm-macros. # # SPDX-License-Identifier: GPL-3.0-or-later # Define arches for PA and SA # There is no %%go_arches_future that contains %%gccgo_arches, as # %%gccgo_arches don't match any currently supported Fedora architectures %golang_arches_future x86_64 armv3l armv4b armv4l armv4tl armv5tl armv5tel armv5tejl armv6l armv6hl armv7l armv7hl armv7hnl armv8l armv8hl armv8hnl armv8hcnl aarch64 ppc64le s390x %golang_arches x86_64 aarch64 ppc64le s390x %gccgo_arches mips mipsel mipsr6 mipsr6el mips64 mips64el mips64r6 mips64r6el %go_arches %{golang_arches} %{gccgo_arches} # Where to set GOPATH for builds %gopath /usr/share/gocode # Define go_compilers macro to signal go-compiler package is available %go_compiler 1 # Sanitize a Go import path that can then serve as rpm package name # Mandatory parameter: a Go import path (without flag) # Optional parameters: # – “-c <compatid>” a compat identifier, used to distinguish the package # from the primary package tracking the project recommended # version. For example: a (different) major version, a # specific shortened commit, etc # -L Enable new naming scheme for versioned compat packages # that respect Fedora Packaging Guidelines. # All new go packages should use this option. %gorpmname(Lc:) %{lua: local go = require "fedora.srpm.go" if rpm.expand("%{-L}") ~= "" then rpm.define("go_use_new_versioning 1") end print(go.rpmname("%1", "%{-c}")) } # Map Go information to rpm metadata. This macro will compute default spec # variable values. # # The following spec variable MUST be set before calling the macro: # # goipath the packaged Go project import path # # The following spec variables SHOULD be set before calling the macro: # # forgeurl the project url on the forge, # if it can not be deduced from goipath # Version if applicable, set it with Version: <version> # tag if applicable # commit if applicable # date if applicable (to override the mtime of the Source archive) # # Use -z for multiple calls to the macro # # The macro will attempt to compute and set the following variables if they are # not already set by the packager: # # goname an rpm-compatible package name derived from goipath # gosource an URL that can be used as SourceX: value # gourl an URL that can be used as URL: value # # It will delegate processing to the forgemeta macro for: # # forgesource an URL that can be used as SourceX: value # forgesetupargs the correct arguments to pass to %setup for this source # used by %forgesetup and %forgeautosetup # archivename the source archive filename, without extentions # archiveext the source archive filename extensions, without leading dot # archiveurl the url that can be used to download the source archive, # without renaming # topdir the source archive top directory (can be empty) # extractdir the source directory created inside %{_builddir} after using # %%forgesetup, %forgeautosetup or %{forgesetupargs} # repo the repository name # owner the repository owner (if used by another computed variable) # shortcommit the commit hash clamping used by the forge, if any # scm the scm type, when packaging code snapshots: commits or tags # distprefix the prefix that needs adding to dist to trace non-release packaging # # Most of the computed variables are both overridable and optional. # # Optional parameters: # -a process all sources in one go, instead of using separate -z calls # -z <number> suffix all the read and written variable names with <number> # for example read goipath<number>, version<number>… # and generate goname<number>, archiveurl<number>… # The macro assumes that null or nil suffix is used for the primary # package source. # -s Silently ignore problems in forgeurl, use it if it can be parsed, # ignore it otherwise. # -v Be verbose and print every spec variable the macro sets. # -i Print some info about the state of spec variables the macro may use or # set at the end of the processing. # -f Use ExclusiveArch: %%{golang_arches_future}, which excludes the package # from %ix86. All new go packages should use this option. # -L Enable new naming scheme for versioned compat packages that respects # Fedora Packaging Guidelines. # All new go packages should use this option. %gometa(az:svifL) %{lua: if rpm.expand("%{-f}") == "" then exclusive_arches = "%{golang_arches}" else exclusive_arches = "%{golang_arches_future}" end print( "BuildRequires: go-rpm-macros\\n") print(rpm.expand("ExclusiveArch: " .. exclusive_arches .. "\\n")) local fedora = require "fedora.common" local go = require "fedora.srpm.go" local verbose = rpm.expand("%{-v}") ~= "" local informative = rpm.expand("%{-i}") ~= "" local silent = rpm.expand("%{-s}") ~= "" local processall = (rpm.expand("%{-a}") ~= "") and (rpm.expand("%{-z}") == "") if rpm.expand("%{-L}") ~= "" then rpm.define("go_use_new_versioning 1") end if processall then for _,s in pairs(fedora.getsuffixes("goipath")) do go.meta(s,verbose,informative,silent) end else go.meta(rpm.expand("%{-z}"),verbose,informative,silent) end } # Create %package sections for every known kind of go subpackage. Arguments: # -v be verbose %gopkg(av) %{expand: %godevelpkg -a %{-v} %goaltpkg -a %{-v} } # Create a %package section for a golang--devel subpackage. Arguments: # -z <number> read the zth block of definitions, for example # %{goipaths<number>} # -a process all blocks in one go, instead of using separate # -z calls # -v be verbose %godevelpkg(z:av) %{lua: local go = require "fedora.srpm.go" local suffix = rpm.expand("%{-z}") local processall = (rpm.expand("%{-a}") ~= "") and (rpm.expand("%{-z}") == "") local verbose = (rpm.expand("%{-v}") ~= "") go.pkg("devel", suffix, processall, verbose) } # Create a %package section for a compat-golang--devel subpackage. Arguments: # -z <number> read the zth block of definitions, for example # %{goaltipaths<number>} # -a process all blocks in one go, instead of using separate # -z calls # -v be verbose %goaltpkg(z:av) %{lua: local go = require "fedora.srpm.go" local suffix = rpm.expand("%{-z}") local processall = (rpm.expand("%{-a}") ~= "") and (rpm.expand("%{-z}") == "") local verbose = (rpm.expand("%{-v}") ~= "") go.pkg("alt", suffix, processall, verbose) } # Create %files sections for every known kind of Go subpackage. Arguments: # -v be verbose %gopkgfiles(av) %{expand: %godevelfiles -a %{-v} %goaltfiles -a %{-v} } # Create a %files section for a golang--devel subpackage. Arguments: # -z <number> read the zth block of definitions, for example # %{goipaths<number>} # -a process all blocks in one go, instead of using separate # -z calls # -v be verbose %godevelfiles(z:av) %{lua: local go = require "fedora.srpm.go" local suffix = rpm.expand("%{-z}") local processall = (rpm.expand("%{-a}") ~= "") and (rpm.expand("%{-z}") == "") local verbose = (rpm.expand("%{-v}") ~= "") go.files("devel", suffix, processall, verbose) } # Create a %files section for a compat-golang--devel subpackage. Arguments: # -z <number> read the zth block of definitions, for example # %{goaltipaths<number>} # -a process all blocks in one go, instead of using separate # -z calls # -v be verbose %goaltfiles(z:av) %{lua: local go = require "fedora.srpm.go" local suffix = rpm.expand("%{-z}") local processall = (rpm.expand("%{-a}") ~= "") and (rpm.expand("%{-z}") == "") local verbose = (rpm.expand("%{-v}") ~= "") go.files("alt", suffix, processall, verbose) } # Define commands for building # BUILD_ID can be generated for golang build no matter of debuginfo %gobuild(o:) \ GOPPC64=power9 GOAMD64=v2 CGO_CPPFLAGS="-D_FORTIFY_SOURCE=2 -fstack-protector-all" go build -compiler gc -buildmode pie -tags="rpm_crashtraceback libtrust_openssl ${GO_BUILDTAGS-${BUILDTAGS-}}" -ldflags "-linkmode=external -compressdwarf=false ${LDFLAGS:-} -B 0x$(head -c20 /dev/urandom\|od -An -tx1\|tr -d ' \\n') -extldflags '%__global_ldflags'" -a -v -x %{?};\ # Define commands for testing %gotest() go test -compiler gc -ldflags "${LDFLAGS:-}" %{?};	9.81 KB	2026-03-03 21:43
📄 macros.java-srpm # Arches that OpenJDK and dependent packages run on %java_arches aarch64 ppc64le s390x x86_64	94 B	2025-10-30 10:48
📄 macros.kernel-srpm # kernel_arches lists what arches the full kernel is built for. %kernel_arches x86_64 s390x ppc64le aarch64	109 B	2025-09-17 07:20
📄 macros.kmp # Use these macros to differentiate between RH and other KMP implementation(s). redhat_kernel_module_package 1 kernel_module_package_release 1 redhat_kmp_has_post_hooks 1 %__brp_kmod_set_exec_bit /usr/lib/rpm/redhat/brp-kmod-set-exec-bit %__brp_kmod_restore_perms /usr/lib/rpm/redhat/brp-kmod-restore-perms %__kmod_brps_added 0 #kernel_module_package [ -n name ] [ -v version ] [ -r release ] [ -s script ] # [ -f filelist] [ -x ] [ -p preamble ] flavor flavor ... %kernel_module_package_buildreqs %global kmodtool_generate_buildreqs 1 \ kernel-devel kernel-abi-stablelists redhat-rpm-config kernel-rpm-macros elfutils-libelf-devel kmod %kernel_module_package(n:v:r:s:f:xp:) %{expand:%( \ ## An ugly hack: we want kmods to be processed by find-debuginfo, ## but it processes only files with executable permission set. ## It is important now since, as of now, if debuginfo package ## is enabled (and it is enabled), there's an RPM build error ## as a result of lack of ether absence or emptiness of ## debugsourcefiles.list (which is likely a bug in RPM, but it looks ## like that there's no obvious fix and apparently no one have ## any issues with this). ## In order to minimise intrusiveness, usually (in Red Hat-built kmod ## RPMs) .ko files just have executable permission being set as a part ## of %build section. There are two caveats with kmp, however: ## We have no control over %build section itself (and it wasn't ## required previously) ## * Changing the criteria used in find-debuginfo.sh/brp-strip ## for selecting files that have to undergo debug section separation ## may introduce regression. ## As a result, we insert additional hooks in __spec_install_post ## (__brp_kmod_set_exec_bit in the beginning and ## __brp_kmod_restore_perms in the end) that (temporarily) set ## executable permission for .ko files so find-debuginfo.sh will pick ## them up. ## Unfortunately, __spec_install_post's body is copied here since ## we want that __debug_package macro expansion has been performed ## lazily and it looks like RPM has no ability to provide a body ## of a macro verbatim. if [ 0 = "%{__kmod_brps_added}" ]; then \ echo "%%global __spec_install_post \\\\" \ echo " %%{?__brp_kmod_set_exec_bit} \\\\" \ echo " %%%%{?__debug_package:%%%%{__debug_install_post}} \\\\" \ echo " %%{__arch_install_post} \\\\" \ echo " %%{__os_install_post} \\\\" \ echo " %%{?__brp_kmod_pre_sign_process} \\\\" \ echo " %%{?__brp_kmod_sign} \\\\" \ echo " %%{?__brp_kmod_post_sign_process} \\\\" \ echo " %%{?__brp_kmod_compress} \\\\" \ echo " %%{?__brp_kmod_post_compress_process} \\\\" \ echo " %%{?__brp_kmod_restore_perms} \\\\" \ echo "%%{nil}" \ fi \ %global __kmod_brps_added 1 \ %global kmodtool %{-s}%{!-s:/usr/lib/rpm/redhat/kmodtool} \ %global kmod_version %{-v}%{!-v:%{version}} \ %global kmod_release %{-r}%{!-r:%{release}} \ %global latest_kernel %({ rpm -q --qf '%%{VERSION}-%%{RELEASE}.%%{ARCH}\\\\n' kernel-rt-devel kernel-aarch64-devel kernel-devel \| grep -v 'is not installed' \| /usr/lib/rpm/redhat/rpmsort -r \| head -n 1; echo '%%%%{nil}'; } \| head -n 1) \ %{!?kernel_version:%{expand:%%global kernel_version %{latest_kernel}}} \ %global kverrel %(%{kmodtool} verrel %{?kernel_version} 2>/dev/null) \ flavors="default" \ if [ -z "%" ]; then \ flavors_to_build=$flavors \ elif [ -z "%{-x}" ]; then \ flavors_to_build="%" \ else \ flavors_to_build=" $flavors "\ for i in %* \ do \ flavors_to_build=${flavors_to_build//$i /} done \ fi \ echo "%%global flavors_to_build ${flavors_to_build:-%%nil}" \ echo "%%global kernel_source() \\\$([ default = \"%%%%{1}\" ] && echo \"/usr/src/kernels//%%%%kverrel\" \|\| %{kmodtool} kernel_source \"%%%%{kverrel}\" \"%%%%{1}\" 2>/dev/null \|\| { ls -Ud \"/usr/src/kernels///%%%%{kverrel}\"[.+]\"%%%%{1}\" \| sort -V \| tail -n 1; } \|\| echo \"/usr/src/kernels////%%%%kverrel.%%%%1\")" \ echo "%%global kernel_module_package_moddir() extra" \ if [ ! -z "%{-f}" ] \ then \ filelist="%{-f}" \ fi \ if [ ! -z "%{-p}" ] \ then \ preamble="%{-p}" \ fi \ nobuildreqs="yes" \ if [ "x%{kmodtool_generate_buildreqs}" != "x1" ] \ then \ nobuildreqs="no" \ fi \ override_filelist="$filelist" override_preamble="$preamble" nobuildreqs="$nobuildreqs" kmod_version=%kmod_version kmod_release=%kmod_release %{kmodtool} rpmtemplate %{-n*}%{!-n:%name} %{kverrel} $flavors_to_build 2>/dev/null \ )}	4.38 KB	2025-09-17 07:11
📄 macros.ldc-srpm # arches that ldc builds on %ldc_arches %{ix86} x86_64 %{arm} aarch64	70 B	2025-10-30 10:48
📄 macros.ldconfig #%ldconfig /sbin/ldconfig %ldconfig_post(n:) %{?ldconfig:%post -p %ldconfig %{?} %{-n:-n %{-n}}\ %end} %ldconfig_postun(n:) %{?ldconfig:%postun -p %ldconfig %{?} %{-n:-n %{-n}}\ %end} %ldconfig_scriptlets(n:) %{?ldconfig:\ %ldconfig_post %{?} %{-n:-n %{-n}}\ %ldconfig_postun %{?} %{-n:-n %{-n}}\ }	307 B	2025-10-30 10:48
📄 macros.lua-srpm %lua_version %{lua: print(string.sub(_VERSION, 5))} %lua_requires \ %if 0%{?fedora} \|\| 0%{?rhel} >= 7 \ Requires: lua(abi) = %{lua_version} \ %else \ Requires: lua >= %{lua_version} \ Requires: lua < %{lua: os.setlocale('C'); print(string.sub(_VERSION, 5) + 0.1)} \ %endif \ %{nil}	283 B	2022-02-11 22:12
📄 macros.mono-srpm # arches that mono builds on %mono_arches %{ix86} x86_64 sparc sparcv9 ia64 %{arm} aarch64 alpha s390x ppc ppc64 ppc64le %_monodir %{_prefix}/lib/mono %_monogacdir %{_monodir}/gac	181 B	2025-10-30 10:48
📄 macros.nodejs-srpm # nodejs_arches lists what arches Node.js and dependent packages run on. # # Enabling Node.js on other arches requires porting the V8 JavaScript JIT to # those arches. Support for POWER and aarch64 arrived in nodejs v4. Support # for s390x arrived in nodejs v6 %nodejs_arches %{ix86} x86_64 %{arm} aarch64 %{power64} s390x	324 B	2025-10-30 10:48
📄 macros.ocaml-srpm # Note that OCaml is compiled on all architectures. However # on some (rare) architectures, only bytecode compilation is # available. Use these macros to find out if native code # compilation is available on a particular architecture. # Architectures that support the OCaml native code compiler. %ocaml_native_compiler aarch64 %{arm} %{ix86} ppc ppc64 ppc64le riscv64 s390x sparc sparcv9 x86_64 # Architectures that support native dynamic linking of OCaml code. %ocaml_natdynlink aarch64 %{arm} %{ix86} ppc ppc64 ppc64le riscv64 s390x sparc sparcv9 x86_64 # Architectures that support profiling of native code (ocamlopt -p). # This was removed in OCaml 4.09. # https://github.com/ocaml/ocaml/pull/2314 %ocaml_native_profiling %{nil}	745 B	2022-02-16 10:20
📄 macros.openblas-srpm # Architectures that OpenBLAS supports %openblas_arches x86_64 %{ix86} armv7hl %{power64} aarch64 s390x	104 B	2022-02-10 18:48
📄 macros.perl-srpm # Copyright (c) 2012 Petr Pisar <ppisar@redhat.com>. # This file is distributed under the terms of GNU GPL license version 3, or # any later version. # This file contains macros that can be used for building source RPM package # from git source repository. This file must present in minimal build root to # take effect. # This file must not use Perl or any non-minimal-build-root package. The # purpose is to enable bootstrapping perl. # Perl bootstrap For rebuild of Perl and all related packages is needed # switch, which enable only vital build requires. This could help cyclic # dependencies, for example: perl-Test-Minimum-Version <-> # perl-Perl-Minimum-Version Defined for bootstraping, undefined otherwise. # Usage: %%if !%%{defined perl_bootstrap} ... %%endif #%%perl_bootstrap 1 # Perl macro, no longer part of rpm >= 4.15 %__perl %{_bindir}/perl	862 B	2022-03-25 12:27
📄 macros.pkgconf %pkgconfig_personalitydir /usr/share/pkgconfig/personality.d	61 B	2023-04-06 20:27
📄 macros.python-srpm # There are multiple Python 3 versions packaged, but only one can be the "main" version # That means that it owns the "python3" namespace: # - python3 package name # - /usr/bin/python3 command # - python3-foo packages are meant for this version # Other versions of Python 3 always contain the version in the namespace: # - python3.XX package name # - /usr/bin/python3.XX command # - python3.XX-foo packages (if allowed) # # Python spec files use the version defined here to determine defaults for the # %%py_provides and %%python_provide macros, as well as for the "pythonname" generator that # provides python3-foo for python3.XX-foo and vice versa for the default "main" version. # E.g. in Fedora 33, python3.9-foo will provide python3-foo, # python3-foo will provide python3.9-foo. # # There are two macros: # # This always contains the major.minor version (with dots), default for %%python3_version. %__default_python3_version 3.9 # # The pkgname version that determines the alternative provide name (e.g. python3.9-foo), # set to the same as above, but historically hasn't included the dot. # This is left intentionally a separate macro, in case the naming convention ever changes. %__default_python3_pkgversion %__default_python3_version # python3_pkgversion specifies the version of Python 3 in the distro. # For Fedora, this is usually just "3". # It can be a specific version distro-wide (e.g. "36" in EPEL7). # Alternatively, it can be overridden in spec (e.g. to "3.8") when building for alternate Python stacks. %python3_pkgversion 3 # Define the Python interpreter paths in the SRPM macros so that # - they can be used in Build/Requires # - they can be used in non-Python packages where requiring pythonX-devel would # be an overkill # use the underscored macros to redefine the behavior of %%python3_version etc. %__python2 /usr/bin/python2 %__python3 /usr/bin/python%{python3_pkgversion} # use the non-underscored macros to refer to Python in spec, etc. %python2 %__python2 %python3 %__python3 # See https://fedoraproject.org/wiki/Changes/PythonMacroError %__python %{error:attempt to use unversioned python, define %%__python to %{__python2} or %{__python3} explicitly} # Users can use %%python only if they redefined %%__python (e.g. to %%__python3) %python %__python # Define where Python wheels will be stored and the prefix of -wheel packages # - In Fedora we want wheel subpackages named e.g. `python-pip-wheel` that # install packages into `/usr/share/python-wheels`. Both names are not # versioned, because they're used by all Python 3 stacks. # - In RHEL we want wheel packages named e.g. `python3-pip-wheel` and # `python3.11-pip-wheel` that install packages into similarly versioned # locations. We want each Python stack in RHEL to have their own wheels, # because the main python3 wheels (which we can't upgrade) will likely be # quite old by the time we're adding new alternate Python stacks. # - In ELN we want to follow Fedora, because builds for ELN and Fedora rawhide # need to be interoperable. %python_wheel_pkg_prefix python%{?rhel:%{!?eln:%{python3_pkgversion}}} %python_wheel_dir %{_datadir}/%{python_wheel_pkg_prefix}-wheels # === Macros for Build/Requires tags using Python dist tags === # - https://fedoraproject.org/wiki/Changes/Automatic_Provides_for_Python_RPM_Packages # - These macros need to be in macros.python-srpm, because BuildRequires tags # get rendered as runtime requires into the metadata of SRPMs. # Converts Python dist name to a canonical format %py_dist_name() %{lua:\ name = rpm.expand("%{?1:%{1}}");\ canonical = string.gsub(string.lower(name), "[^%w%[%]]+", "-");\ print(canonical);\ } # Creates Python 2 dist tag(s) after converting names to canonical format # Needs to first put all arguments into a list, because invoking a different # macro (%%py_dist_name) overwrites them %py2_dist() %{lua:\ args = {}\ arg = 1\ while (true) do\ name = rpm.expand("%{?" .. arg .. ":%{" .. arg .. "}}");\ if (name == nil or name == '') then\ break\ end\ args[arg] = name\ arg = arg + 1\ end\ for arg, name in ipairs(args) do\ canonical = rpm.expand("%py_dist_name " .. name);\ print("python2dist(" .. canonical .. ") ");\ end\ } # Creates Python 3 dist tag(s) after converting names to canonical format # Needs to first put all arguments into a list, because invoking a different # macro (%%py_dist_name) overwrites them %py3_dist() %{lua:\ python3_pkgversion = rpm.expand("%python3_pkgversion");\ args = {}\ arg = 1\ while (true) do\ name = rpm.expand("%{?" .. arg .. ":%{" .. arg .. "}}");\ if (name == nil or name == '') then\ break\ end\ args[arg] = name\ arg = arg + 1\ end\ for arg, name in ipairs(args) do\ canonical = rpm.expand("%py_dist_name " .. name);\ print("python" .. python3_pkgversion .. "dist(" .. canonical .. ") ");\ end\ } # Macro to replace overly complicated references to PyPI source files. # Expands to the pythonhosted URL for a package # Accepts zero to three arguments: # 1: The PyPI project name, defaulting to %%srcname if it is defined, then # %%pypi_name if it is defined, then just %%name. # 2: The PYPI version, defaulting to %%version with tildes stripped. # 3: The file extension, defaulting to "tar.gz". (A period will be added # automatically.) # Requires %%__pypi_url and %%__pypi_default_extension to be defined. %__pypi_url https://files.pythonhosted.org/packages/source/ %__pypi_default_extension tar.gz %pypi_source() %{lua: local src = rpm.expand('%1') local ver = rpm.expand('%2') local ext = rpm.expand('%3') local url = rpm.expand('%__pypi_url') \ -- If no first argument, try %srcname, then %pypi_name, then %name -- Note that rpm leaves macros unchanged if they are not defined. if src == '%1' then src = rpm.expand('%srcname') end if src == '%srcname' then src = rpm.expand('%pypi_name') end if src == '%pypi_name' then src = rpm.expand('%name') end \ -- If no second argument, use %version if ver == '%2' then ver = rpm.expand('%version'):gsub('~', '') end \ -- If no third argument, use the preset default extension if ext == '%3' then ext = rpm.expand('%__pypi_default_extension') end \ local first = string.sub(src, 1, 1) \ print(url .. first .. '/' .. src .. '/' .. src .. '-' .. ver .. '.' .. ext) } %py_provides() %{lua: local python = require 'fedora.srpm.python' local rhel = rpm.expand('%{?rhel}') local name = rpm.expand('%1') if name == '%1' then rpm.expand('%{error:%%py_provides requires at least 1 argument, the name to provide}') end local evr = rpm.expand('%2') if evr == '%2' then evr = rpm.expand('%{?epoch:%{epoch}:}%{version}-%{release}') end print('Provides: ' .. name .. ' = ' .. evr .. '\\n') local provides = python.python_altprovides(name, evr) for i, provide in ipairs(provides) do print('Provides: ' .. provide .. '\\n') end -- We only generate these Obsoletes on CentOS/RHEL to provide clean upgrade -- path, e.g. python3-foo obsoletes python39-foo from previous RHEL. -- In Fedora this is not needed as we don't ship ecosystem packages -- for alternative Python interpreters. if rhel ~= '' then -- Create Obsoletes only if the name does not end in a parenthesis, -- as Obsoletes can't include parentheses. -- This most commonly happens when the name contains an isa. if (string.sub(name, "-1") ~= ")") then local obsoletes = python.python_altobsoletes(name, evr) for i, obsolete in ipairs(obsoletes) do print('Obsoletes: ' .. obsolete .. '\\n') end end end } %python_extras_subpkg(n:i:f:FaA) %{expand:%{lua: local option_n = '-n (name of the base package)' local option_i = '-i (buildroot path to metadata)' local option_f = '-f (builddir path to a filelist)' local option_F = '-F (skip %%files section)' local option_a = '-a (insert BuildArch: noarch)' local option_A = '-A (do not insert BuildArch: noarch (default))' local value_n = rpm.expand('%{-n}') local value_i = rpm.expand('%{-i}') local value_f = rpm.expand('%{-f}') local value_F = rpm.expand('%{-F}') local value_a = rpm.expand('%{-a}') local value_A = rpm.expand('%{-A}') local args = rpm.expand('%{}') if value_n == '' then rpm.expand('%{error:%%%0: missing option ' .. option_n .. '}') end if value_i == '' and value_f == '' and value_F == '' then rpm.expand('%{error:%%%0: missing option ' .. option_i .. ' or ' .. option_f .. ' or ' .. option_F .. '}') end if value_i ~= '' and value_f ~= '' then rpm.expand('%{error:%%%0: simultaneous ' .. option_i .. ' and ' .. option_f .. ' options are not possible}') end if value_i ~= '' and value_F ~= '' then rpm.expand('%{error:%%%0: simultaneous ' .. option_i .. ' and ' .. option_F .. ' options are not possible}') end if value_f ~= '' and value_F ~= '' then rpm.expand('%{error:%%%0: simultaneous ' .. option_f .. ' and ' .. option_F .. ' options are not possible}') end if value_a ~= '' and value_A ~= '' then rpm.expand('%{error:%%%0: simultaneous ' .. option_a .. ' and ' .. option_A .. ' options are not possible}') end if args == '' then rpm.expand('%{error:%%%0 requires at least one argument with "extras" name}') end local requires = 'Requires: ' .. value_n .. ' = %{?epoch:%{epoch}:}%{version}-%{release}' for extras in args:gmatch('[^%s,]+') do local rpmname = value_n .. '+' .. extras local pkgdef = '%package -n ' .. rpmname local summary = 'Summary: Metapackage for ' .. value_n .. ': ' .. extras .. ' extras' local description = '%description -n ' .. rpmname .. '\\\n' local current_line = 'This is a metapackage bringing in' for _, word in ipairs({extras, 'extras', 'requires', 'for', value_n .. '.'}) do local line = current_line .. ' ' .. word if line:len() > 79 then description = description .. current_line .. '\\\n' current_line = word else current_line = line end end description = description .. current_line .. '\\\n' .. 'It makes sure the dependencies are installed.\\\n' local files = '' if value_i ~= '' then files = '%files -n ' .. rpmname .. '\\\n' .. '%ghost ' .. value_i elseif value_f ~= '' then files = '%files -n ' .. rpmname .. ' -f ' .. value_f end local tags = summary .. '\\\n' .. requires if value_a ~= '' then tags = tags .. '\\\nBuildArch: noarch' end for i, line in ipairs({pkgdef, tags, description, files, ''}) do print(line .. '\\\n') end end }}	11.13 KB	2024-10-01 12:46
📄 macros.qt5-qtbase %_qt5 qt5-qtbase %_qt5_epoch 0 %_qt5_version 5.15.9 %_qt5_evr 5.15.9-11.el9_6	78 B	2025-06-24 09:09
📄 macros.qt5-srpm # # the architectures theoretically supported by the version of V8 used (#1298011) # # You may need some minor patching to build on one of the secondary # # architectures, e.g., to add to the Qt -> Chromium -> V8 arch translations. # # If you cannot get this package to build on your secondary architecure, please: # # * remove your architecture from this list AND # # * put #1298011 onto your ExcludeArch tracker. %qt5_qtwebengine_arches %{ix86} x86_64 %{arm} aarch64 mips mipsel mips64el	492 B	2023-09-27 01:05
📄 macros.rust-srpm %rust_arches x86_64 %{ix86} armv7hl aarch64 ppc64 ppc64le riscv64 s390x %version_no_tilde() %{lua: local sep = rpm.expand('%1') local ver = rpm.expand('%2') \ if sep == '%1' then sep = '-' end \ if ver == '%2' then ver = rpm.expand('%version') end ver = ver:gsub('~', sep) \ print(ver) } %__crates_url https://crates.io/api/v1/crates/ %crates_source() %{lua: local crate = rpm.expand('%1') local version = rpm.expand('%2') local url = rpm.expand('%__crates_url') \ if crate == '%1' then crate = rpm.expand('%real_crate') end if crate == '%real_crate' then crate = rpm.expand('%crate') end if crate == '%crate' then crate = rpm.expand('%name') end \ if version == '%2' then version = rpm.expand('%version') end version = version:gsub('~', '-') \ print(url .. crate .. '/' .. version .. '/download#/' .. crate .. '-' .. version .. '.crate') } # If crate not in _build_crates and _module_build is set, we should skip the build %__cargo_skip_build %{lua: local crate = rpm.expand('%{crate}') local build_crate = false for w in rpm.expand('%{?_build_crates}'):gmatch('%S+') do if w == crate then build_crate = true break end end if (rpm.expand('%{defined _module_build}') ~= '0' and not build_crate) then print(1) else print(0) end}	1.34 KB	2022-02-11 11:32
📄 macros.scl # scl-utils RPM macros # # Copyright (C) 2012 Red Hat, Inc. # Written by Jindrich Novy <jnovy@redhat.com>. %scl_debug() %{expand: %define old_debug %{lua:print(rpm.expand("%{debug_package}"):len())} %undefine _debugsource_packages %global debug_package %{expand: %if "%{?old_debug}" == "0" %{expand: %{nil}} %else %if "%{?scl}%{!?scl:0}" == "%{pkg_name}" %{expand: %{nil}} %else %ifnarch noarch %package debuginfo Summary: Debug information for package %{name} Group: Development/Debug AutoReqProv: 0 Requires: %scl_runtime Provides: scl-package(%scl) %{lua: debuginfo=tonumber(rpm.expand("%{old_debug}")) if debuginfo > 0 then rpm.define("__debug_package 1") end } %description debuginfo This package provides debug information for package %{name}. Debug information is useful when developing applications that use this package or when debugging this package. %files debuginfo -f debugfiles.list %defattr(-,root,root) %endif %endif %endif %{nil}}} %scl_prefix() %{?scl:%(if [ "%1" = "%%1" ]; then echo "%{scl}-"; else echo "%1-"; fi)}%{!?scl:%{nil}} %scl_package() %{expand:%{!?_root_prefix: %global pkg_name %1 %global scl_name %{scl} %global scl_runtime %{scl}-runtime %global scl_basedir /opt %{!?scl_vendor: %global scl_vendor rh} %{!?_scl_prefix: %global _scl_prefix %{scl_basedir}/%{scl_vendor}} %global _scl_scripts %{_scl_prefix}/%{scl} %global _scl_root %{_scl_prefix}/%{scl}/root %global _root_prefix %{_prefix} %global _root_exec_prefix %{_root_prefix} %global _root_bindir %{_exec_prefix}/bin %global _root_sbindir %{_exec_prefix}/sbin %global _root_libexecdir %{_exec_prefix}/libexec %global _root_datadir %{_prefix}/share %global _root_sysconfdir %{_sysconfdir} %global _root_sharedstatedir %{_sharedstatedir} %global _root_localstatedir %{_localstatedir} %global _root_libdir %{_exec_prefix}/%{_lib} %global _root_includedir %{_prefix}/include %global _root_infodir %{_datadir}/info %global _root_mandir %{_datadir}/man %global _root_initddir %{_sysconfdir}/rc.d/init.d %global _prefix %{_scl_root}/usr %global _exec_prefix %{_prefix} %global _bindir %{_exec_prefix}/bin %global _sbindir %{_exec_prefix}/sbin %global _libexecdir %{_exec_prefix}/libexec %global _datadir %{_prefix}/share %global _sysconfdir %{_scl_root}/etc %{?nfsmountable: %global _sysconfdir %{_root_sysconfdir}%{_scl_prefix}/scls/%{scl}} %{?rh_layout: %global _sysconfdir %{_root_sysconfdir}%{_scl_prefix}/%{scl}} %global _sharedstatedir %{_scl_root}/var/lib %{?nfsmountable: %global _sharedstatedir %{_root_localstatedir}%{_scl_prefix}/scls/%{scl}/lib} %{?rh_layout: %global _sharedstatedir %{_root_localstatedir}%{_scl_prefix}/%{scl}/lib} %global _localstatedir %{_scl_root}/var %{?nfsmountable: %global _localstatedir %{_root_localstatedir}%{_scl_prefix}/scls/%{scl}} %{?rh_layout: %global _localstatedir %{_root_localstatedir}%{_scl_prefix}/%{scl}} %global _libdir %{_exec_prefix}/%{_lib} %global _includedir %{_prefix}/include %global _infodir %{_datadir}/info %global _mandir %{_datadir}/man %global _docdir %{_datadir}/doc %global _defaultdocdir %{_docdir} } %{?scl_dependency_generators:%scl_dependency_generators} %global scl_pkg_name %{scl}-%{pkg_name} %scl_debug %global __os_install_post %{expand: /usr/lib/rpm/brp-scl-compress %{_scl_root} %{!?__debug_package:/usr/lib/rpm/brp-strip %{__strip} /usr/lib/rpm/brp-strip-comment-note %{__strip} %{__objdump} } /usr/lib/rpm/brp-strip-static-archive %{__strip} /usr/lib/rpm/brp-scl-python-bytecompile %{__python3} %{?_python_bytecompile_errors_terminate_build} %{_scl_root} /usr/lib/rpm/brp-python-hardlink %{nil}} BuildRequires: scl-utils-build %if "%{?scl}%{!?scl:0}" == "%{pkg_name}" Requires: %{scl_runtime} Provides: scl-package(%{scl}) %endif %{?scl_package_override:%scl_package_override} } %scl_require() %{_scl_prefix}/%1/enable, %1 %scl_require_package() %1-%2 %scl_enable_script() %{expand: cat >> %{buildroot}%{_scl_scripts}/enable << 'EOF' eval `/usr/bin/modulecmd bash load %{scl}` EOF } %scl_files %{expand: %defattr(-,root,root,-) %dir %_scl_prefix %dir %attr(555,root,root) %{_scl_root} %dir %attr(555,root,root) %{_scl_scripts} %{_scl_scripts}/enable %{_root_sysconfdir}/scl/prefixes/%scl %{_scl_root}/bin %attr(555,root,root) %{_scl_root}/boot %{_scl_root}/dev %dir %{_sysconfdir} %{_sysconfdir}/X11 %{_sysconfdir}/xdg %{_sysconfdir}/opt %{_sysconfdir}/pm %{_sysconfdir}/xinetd.d %{_sysconfdir}/skel %{_sysconfdir}/sysconfig %{_sysconfdir}/pki %{_scl_root}/home %{_scl_root}/lib %ifarch x86_64 ppc ppc64 ppc64le aarch64 sparc sparc64 s390 s390x %{_scl_root}/%{_lib} %endif %{_scl_root}/media %dir %{_scl_root}/mnt %dir %{_scl_root}/opt %attr(555,root,root) %{_scl_root}/proc %attr(550,root,root) %{_scl_root}/root %{_scl_root}/run %{_scl_root}/sbin %{_scl_root}/srv %{_scl_root}/sys %attr(1777,root,root) %{_scl_root}/tmp %dir %{_scl_root}/usr %attr(555,root,root) %{_scl_root}/usr/bin %{_scl_root}/usr/etc %{_scl_root}/usr/games %{_scl_root}/usr/include %dir %attr(555,root,root) %{_scl_root}/usr/lib %ifarch x86_64 ppc ppc64 ppc64le aarch64 sparc sparc64 s390 s390x %attr(555,root,root) %{_scl_root}/usr/%{_lib} %endif %{_scl_root}/usr/libexec %{_scl_root}/usr/local %attr(555,root,root) %{_scl_root}/usr/sbin %dir %{_scl_root}/usr/share %{_scl_root}/usr/share/aclocal %{_scl_root}/usr/share/applications %{_scl_root}/usr/share/augeas %{_scl_root}/usr/share/backgrounds %{_scl_root}/usr/share/desktop-directories %{_scl_root}/usr/share/dict %{_scl_root}/usr/share/doc %attr(555,root,root) %dir %{_scl_root}/usr/share/empty %{_scl_root}/usr/share/games %{_scl_root}/usr/share/ghostscript %{_scl_root}/usr/share/gnome %{_scl_root}/usr/share/icons %{_scl_root}/usr/share/idl %{_scl_root}/usr/share/info %dir %{_scl_root}/usr/share/licenses %dir %{_scl_root}/usr/share/locale %dir %{_scl_root}/usr/share/man %{_scl_root}/usr/share/mime-info %{_scl_root}/usr/share/misc %{_scl_root}/usr/share/omf %{_scl_root}/usr/share/pixmaps %{_scl_root}/usr/share/sounds %{_scl_root}/usr/share/themes %{_scl_root}/usr/share/xsessions %{_scl_root}/usr/share/X11 %{_scl_root}/usr/src %{_scl_root}/usr/tmp %dir %{_localstatedir} %{_localstatedir}/adm %{_localstatedir}/cache %{_localstatedir}/db %{_localstatedir}/empty %{_localstatedir}/games %{_localstatedir}/gopher %{_localstatedir}/lib %{_localstatedir}/local %ghost %dir %attr(755,root,root) %{_localstatedir}/lock %ghost %{_localstatedir}/lock/subsys %{_localstatedir}/log %{_localstatedir}/mail %{_localstatedir}/nis %{_localstatedir}/opt %{_localstatedir}/preserve %ghost %attr(755,root,root) %{_localstatedir}/run %dir %{_localstatedir}/spool %attr(755,root,root) %{_localstatedir}/spool/lpd %attr(775,root,mail) %{_localstatedir}/spool/mail %attr(1777,root,root) %{_localstatedir}/tmp %{_localstatedir}/yp } %scl_install %{expand: # scl specific stuff mkdir -p %{buildroot}%{_root_sysconfdir}/{rpm,scl/{prefixes,modulefiles}} cat >> %{buildroot}%{_root_sysconfdir}/rpm/macros.%{scl}-config << EOF %%%%scl %scl %{?nfsmountable:%%%%nfsmountable %{nfsmountable}} %{?rh_layout:%%%%rh_layout %{rh_layout}} EOF cat >> %{buildroot}%{_root_sysconfdir}/scl/prefixes/%{scl} << EOF %_scl_prefix EOF test -e %{buildroot}%{_scl_scripts}/%{scl} && ln -s %{_scl_scripts}/%{scl} %{buildroot}%{_root_sysconfdir}/scl/modulefiles/%{scl} # filelist set +x cat >> %{buildroot}/lang-exceptions << EOF af_ZA am_ET ast_ES az_IR bg_BG bn_IN ca@valencia ca_ES ca_ES@valencian cs_CZ de_AT de_CH de_DE default el_GR en_AU en_CA en_GB en_US en_NZ es_AR es_CL es_CO es_CR es_DO es_EC es_ES es_GT es_HN es_MX es_NI es_PA es_PE es_PR es_SV es_UY es_VE et_EE eu_ES fa_IR fi_FI fr_BE fr_CA fr_CH fr_FR gl_ES he_IL hr_HR hu_HU it_CH it_IT ja_JP ko_KR ks@devanagari lv_LV ms_MY my_MM nb_NO nds_DE nl_BE nl_NL pl_PL pt_BR pt_PT ru_RU sl_SI sq_AL sr_RS sv_SE uk_UA ur_PK zh_CN zh_CN.GB2312 zh_HK zh_TW zh_TW.Big5 en@boldquot en@quot nds@NFE sr@ije sr@ijekavian sr@ijekavianlatin sr@latin sr@Latn uz@cyrillic uz@Latn be@latin en@shaw brx brx_IN EOF cat >> %{buildroot}/iso_639.sed << EOF 1,/<iso_639_entries/b # on each new iso-code process the current one \\!\$<iso_639_entry\\\|</iso_639_entries>\$!{ x s/^$// # we are on the first iso-code--nothing to process here t # process and write to output s/\\s\\+/ /g s/<iso_639_entry// s!/\\s>!! # use '%' as a separator of parsed and unparsed input s/\$.\$iso_639_2T_code="\$[^"]\\+\$"\$.\$/\\2 % \\1 \\3/ s/\$[^%]\\+\$%\$.\$iso_639_2B_code="\$[^"]\\+\$"\$.\$/\\1\\t\\3 % \\2 \\4/ # clear subst. memory for the next t t clear :clear s/\$[^%]\\+\$%\$.\$iso_639_1_code="\$[^"]\\+\$"\$.\$/\\1\\t\\3 % \\2 \\4/ t name # no 639-1 code--write xx s/%/\\tXX %/ :name s/\$[^%]\\+\$%\$.\$name="\$[^"]\\+\$"\$.\$/\\1\\t\\3/ s/ \\t/\\t/g p b :noout } H EOF cat >> %{buildroot}/iso_3166.sed << EOF 1,/<iso_3166_entries/b # on each new iso-code process the current one \\!\$<iso_3166_entry\\\|</iso_3166_entries>\$!{ x s/^$// # we are on the first iso-code--nothing to process here t # process and write to output s/\\s\\+/ /g s/<iso_3166_entry// s!/\\s>!! # use '%' as a separator of parsed and unparsed input s/\$.\$alpha_2_code="\$[^"]\\+\$"\$.\$/\\2 % \\1 \\3/ s/\$[^%]\\+\$%\$.\$alpha_3_code="\$[^"]\\+\$"\$.\$/\\1% \\2 \\4/ # clear subst. memory for the next t t clear :clear s/\$[^%]\\+\$%\$.\$numeric_code="\$[^"]\\+\$"\$.\$/\\1% \\2 \\4/ t name # no 3166 code--write xx s/%/\\tXX %/ :name s/\$[^%]\\+\$%\$.\$name="\$[^"]\\+\$"\$.\$/\\1\\t\\3/ s/ \\t/\\t/g p b :noout } H EOF mkdir -p %{buildroot}%{_localstatedir} pushd %{buildroot}%{_localstatedir} mkdir -p {adm,empty,gopher,lib/{games,misc,rpm-state},local,lock/subsys,log,nis,preserve,run,spool/{mail,lpd,uucp},tmp,db,cache,opt,games,yp} popd mkdir -p %{buildroot}%{_sysconfdir} pushd %{buildroot}%{_sysconfdir} mkdir -p {X11/{applnk,fontpath.d},xdg/autostart,opt,pm/{config.d,power.d,sleep.d},xinetd.d,skel,sysconfig,pki} popd mkdir -p %{buildroot}%{_scl_root} rm -f $RPM_BUILD_DIR/%{buildsubdir}/filelist rm -f $RPM_BUILD_DIR/%{buildsubdir}/filesystem pushd %{buildroot}%{_scl_root} mkdir -p boot dev \\ home media mnt opt proc root run/lock srv sys tmp \\ usr/{bin,etc,games,include,lib/{games,locale,modules,sse2},libexec,local/{bin,etc,games,lib,sbin,src,share/{applications,man/man{1,2,3,4,5,6,7,8,9,n,1x,2x,3x,4x,5x,6x,7x,8x,9x},info},libexec,include,},sbin,share/{aclocal,applications,augeas/lenses,backgrounds,desktop-directories,dict,doc,empty,games,ghostscript/conf.d,gnome,icons,idl,info,licenses,man/man{1,2,3,4,5,6,7,8,9,n,1x,2x,3x,4x,5x,6x,7x,8x,9x,0p,1p,3p},mime-info,misc,omf,pixmaps,sounds,themes,xsessions,X11},src,src/kernels,src/debug} %ifarch x86_64 ppc ppc64 ppc64le aarch64 sparc sparc64 s390 s390x mkdir -p usr/{%{_lib}/{games,sse2,tls,X11,pm-utils/{module.d,power.d,sleep.d}},local/%{_lib}} %endif ln -snf %{_localstatedir}/tmp usr/tmp ln -snf spool/mail %{buildroot}%{_localstatedir}/mail ln -snf usr/bin bin ln -snf usr/sbin sbin ln -snf usr/lib lib %ifarch x86_64 ppc ppc64 ppc64le aarch64 sparc sparc64 s390 s390x ln -snf usr/%{_lib} %{_lib} %endif sed -n -f %{buildroot}/iso_639.sed /usr/share/xml/iso-codes/iso_639.xml >%{buildroot}/iso_639.tab sed -n -f %{buildroot}/iso_3166.sed /usr/share/xml/iso-codes/iso_3166.xml >%{buildroot}/iso_3166.tab grep -av "^$" %{buildroot}/iso_639.tab \| grep -av "^#" \| while read a b c d ; do [[ "$d" =~ "^Reserved" ]] && continue [[ "$d" =~ "^No linguistic" ]] && continue locale=$c if [ "$locale" = "XX" ]; then locale=$b fi echo "%lang(${locale}) %{_scl_root}/usr/share/locale/${locale}" >> $RPM_BUILD_DIR/%{buildsubdir}/filelist echo "%lang(${locale}) %ghost %config(missingok) %{_scl_root}/usr/share/man/${locale}" >> $RPM_BUILD_DIR/%{buildsubdir}/filelist done cat %{buildroot}/lang-exceptions \| grep -v "^#" \| grep -v "^$" \| while read loc ; do locale=$loc locality= special= [[ "$locale" =~ "@" ]] && locale=${locale%%%%@} [[ "$locale" =~ "_" ]] && locality=${locale##_} [[ "$locality" =~ "." ]] && locality=${locality%%%%.} [[ "$loc" =~ "_" ]] \|\| [[ "$loc" =~ "@" ]] \|\| special=$loc # If the locality is not official, skip it if [ -n "$locality" ]; then grep -q "^$locality" %{buildroot}/iso_3166.tab \|\| continue fi # If the locale is not official and not special, skip it if [ -z "$special" ]; then egrep -q "[[:space:]]${locale%%_}[[:space:]]" \\ %{buildroot}/iso_639.tab \|\| continue fi echo "%lang(${locale}) %{_scl_root}/usr/share/locale/${loc}" >> $RPM_BUILD_DIR/%{buildsubdir}/filelist echo "%lang(${locale}) %ghost %config(missingok) %{_scl_root}/usr/share/man/${loc}" >> $RPM_BUILD_DIR/%{buildsubdir}/filelist done rm -f %{buildroot}/iso_639.tab rm -f %{buildroot}/iso_639.sed rm -f %{buildroot}/iso_3166.tab rm -f %{buildroot}/iso_3166.sed rm -f %{buildroot}/lang-exceptions cat $RPM_BUILD_DIR/%{buildsubdir}/filelist \| grep "locale" \| while read a b ; do mkdir -p -m 755 %{buildroot}/$b/LC_MESSAGES done cat $RPM_BUILD_DIR/%{buildsubdir}/filelist \| grep "/share/man" \| while read a b c d; do mkdir -p -m 755 %{buildroot}/$d/man{1,2,3,4,5,6,7,8,9,n,1x,2x,3x,4x,5x,6x,7x,8x,9x,0p,1p,3p} done for i in man{1,2,3,4,5,6,7,8,9,n,1x,2x,3x,4x,5x,6x,7x,8x,9x,0p,1p,3p}; do echo "%{_scl_root}/usr/share/man/$i" >> $RPM_BUILD_DIR/%{buildsubdir}/filelist done ln -s $RPM_BUILD_DIR/%{buildsubdir}/filelist $RPM_BUILD_DIR/%{buildsubdir}/filesystem set -x popd }	13.45 KB	2023-04-07 01:57
📄 macros.selinux-policy # Copyright (C) 2017 Red Hat, Inc. All rights reserved. # # Author: Petr Lautrbach <plautrba@redhat.com> # Author: Lukáš Vrabec <lvrabec@redhat.com> # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License # as published by the Free Software Foundation; either version 2 # of the License, or (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. # RPM macros for packages installing SELinux modules %_selinux_policy_version 38.1.65-1.el9_7.1 %_selinux_store_path /var/lib/selinux %_selinux_store_policy_path %{_selinux_store_path}/${_policytype} %_file_context_file %{_sysconfdir}/selinux/${SELINUXTYPE}/contexts/files/file_contexts %_file_context_file_pre %{_localstatedir}/lib/rpm-state/file_contexts.pre %_file_custom_defined_booleans %{_selinux_store_policy_path}/rpmbooleans.custom %_file_custom_defined_booleans_tmp %{_selinux_store_policy_path}/rpmbooleans.custom.tmp # %selinux_requires %selinux_requires \ Requires: selinux-policy >= %{_selinux_policy_version} \ BuildRequires: pkgconfig(systemd) \ BuildRequires: selinux-policy \ BuildRequires: selinux-policy-devel \ Requires(post): selinux-policy-base >= %{_selinux_policy_version} \ Requires(post): libselinux-utils \ Requires(post): policycoreutils \ %if 0%{?fedora} \|\| 0%{?rhel} > 7\ Requires(post): policycoreutils-python-utils \ %else \ Requires(post): policycoreutils-python \ %endif \ %{nil} # %selinux_modules_install [-s <policytype>] [-p <modulepriority>] module [module]... %selinux_modules_install("s:p:") \ if [ -e /etc/selinux/config ]; then \ . /etc/selinux/config \ fi \ _policytype=%{-s} \ if [ -z "${_policytype}" ]; then \ _policytype="targeted" \ fi \ if [ "${SELINUXTYPE}" = "${_policytype}" ]; then \ %{_sbindir}/semodule -n -s ${_policytype} -X %{!-p:200}%{-p} -i %* \|\| : \ %{_sbindir}/selinuxenabled && %{_sbindir}/load_policy \|\| : \ fi \ %{nil} # %selinux_modules_uninstall [-s <policytype>] [-p <modulepriority>] module [module]... %selinux_modules_uninstall("s:p:") \ if [ -e /etc/selinux/config ]; then \ . /etc/selinux/config \ fi \ _policytype=%{-s} \ if [ -z "${_policytype}" ]; then \ _policytype="targeted" \ fi \ if [ $1 -eq 0 ]; then \ if [ "${SELINUXTYPE}" = "${_policytype}" ]; then \ %{_sbindir}/semodule -n -X %{!-p:200}%{-p} -s ${_policytype} -r %* &> /dev/null \|\| : \ %{_sbindir}/selinuxenabled && %{_sbindir}/load_policy \|\| : \ fi \ fi \ %{nil} # %selinux_relabel_pre [-s <policytype>] %selinux_relabel_pre("s:") \ if %{_sbindir}/selinuxenabled; then \ if [ -e /etc/selinux/config ]; then \ . /etc/selinux/config \ fi \ _policytype=%{-s} \ if [ -z "${_policytype}" ]; then \ _policytype="targeted" \ fi \ if [ "${SELINUXTYPE}" = "${_policytype}" ]; then \ [ -f %{_file_context_file_pre} ] \|\| cp -f %{_file_context_file} %{_file_context_file_pre} \ fi \ fi \ %{nil} # %selinux_relabel_post [-s <policytype>] %selinux_relabel_post("s:") \ if [ -e /etc/selinux/config ]; then \ . /etc/selinux/config \ fi \ _policytype=%{-s} \ if [ -z "${_policytype}" ]; then \ _policytype="targeted" \ fi \ if %{_sbindir}/selinuxenabled && [ "${SELINUXTYPE}" = "${_policytype}" ]; then \ if [ -f %{_file_context_file_pre} ]; then \ %{_sbindir}/fixfiles -C %{_file_context_file_pre} restore &> /dev/null \ rm -f %{_file_context_file_pre} \ fi \ fi \ %{nil} # %selinux_set_booleans [-s <policytype>] boolean [boolean]... %selinux_set_booleans("s:") \ if [ -e /etc/selinux/config ]; then \ . /etc/selinux/config \ fi \ _policytype=%{-s} \ if [ -z "${_policytype}" ]; then \ _policytype="targeted" \ fi \ if [ -d "%{_selinux_store_policy_path}" ]; then \ LOCAL_MODIFICATIONS=$(%{_sbindir}/semanage boolean -E) \ if [ ! -f %_file_custom_defined_booleans ]; then \ /bin/echo "# This file is managed by macros.selinux-policy. Do not edit it manually" > %_file_custom_defined_booleans \ fi \ semanage_import='' \ for boolean in %; do \ boolean_name=${boolean%=} \ boolean_value=${boolean#=} \ boolean_local_string=$(grep "$boolean_name\$" <<<$LOCAL_MODIFICATIONS) \ if [ -n "$boolean_local_string" ]; then \ semanage_import="${semanage_import}\\nboolean -m -$boolean_value $boolean_name" \ boolean_customized_string=$(grep "$boolean_name\$" %_file_custom_defined_booleans \| tail -n 1) \ if [ -n "$boolean_customized_string" ]; then \ /bin/echo $boolean_customized_string >> %_file_custom_defined_booleans \ else \ /bin/echo $boolean_local_string >> %_file_custom_defined_booleans \ fi \ else \ semanage_import="${semanage_import}\\nboolean -m -$boolean_value $boolean_name" \ boolean_default_value=$(LC_ALL=C %{_sbindir}/semanage boolean -l \| grep "^$boolean_name " \| sed 's/[^(]([^,], \$on\\\|off\$./\\1/') \ /bin/echo "boolean -m --$boolean_default_value $boolean_name" >> %_file_custom_defined_booleans \ fi \ done; \ if %{_sbindir}/selinuxenabled && [ "${SELINUXTYPE}" = "${_policytype}" ]; then \ /bin/echo -e "$semanage_import" \| %{_sbindir}/semanage import -S "${_policytype}" \ elif test -d /usr/share/selinux/"${_policytype}"/base.lst; then \ /bin/echo -e "$semanage_import" \| %{_sbindir}/semanage import -S "${_policytype}" -N \ fi \ fi \ %{nil} # %selinux_unset_booleans [-s <policytype>] boolean [boolean]... %selinux_unset_booleans("s:") \ if [ -e /etc/selinux/config ]; then \ . /etc/selinux/config \ fi \ _policytype=%{-s} \ if [ -z "${_policytype}" ]; then \ _policytype="targeted" \ fi \ if [ -d "%{_selinux_store_policy_path}" ]; then \ semanage_import='' \ for boolean in %; do \ boolean_name=${boolean%=*} \ boolean_customized_string=$(grep "$boolean_name\$" %_file_custom_defined_booleans \| tail -n 1) \ if [ -n "$boolean_customized_string" ]; then \ awk "/$boolean_customized_string/ && !f{f=1; next} 1" %_file_custom_defined_booleans > %_file_custom_defined_booleans_tmp && mv %_file_custom_defined_booleans_tmp %_file_custom_defined_booleans \ if ! grep -q "$boolean_name\$" %_file_custom_defined_booleans; then \ semanage_import="${semanage_import}\\n${boolean_customized_string}" \ fi \ fi \ done; \ if %{_sbindir}/selinuxenabled && [ "${SELINUXTYPE}" = "${_policytype}" ]; then \ /bin/echo -e "$semanage_import" \| %{_sbindir}/semanage import -S "${_policytype}" \ elif test -d /usr/share/selinux/"${_policytype}"/base.lst; then \ /bin/echo -e "$semanage_import" \| %{_sbindir}/semanage import -S "${_policytype}" -N \ fi \ fi \ %{nil}	6.9 KB	2026-03-02 09:40
📄 macros.systemd # -- Mode: rpm-spec; indent-tabs-mode: nil -- / # SPDX-License-Identifier: LGPL-2.1-or-later # # This file is part of systemd. # RPM macros for packages installing systemd unit files %_systemd_util_dir /usr/lib/systemd %_unitdir /usr/lib/systemd/system %_userunitdir /usr/lib/systemd/user %_presetdir /usr/lib/systemd/system-preset %_userpresetdir /usr/lib/systemd/user-preset %_udevhwdbdir /usr/lib/udev/hwdb.d %_udevrulesdir /usr/lib/udev/rules.d %_journalcatalogdir /usr/lib/systemd/catalog %_binfmtdir /usr/lib/binfmt.d %_sysctldir /usr/lib/sysctl.d %_sysusersdir /usr/lib/sysusers.d %_tmpfilesdir /usr/lib/tmpfiles.d %_user_tmpfilesdir /usr/share/user-tmpfiles.d %_environmentdir /usr/lib/environment.d %_modulesloaddir /usr/lib/modules-load.d %_modprobedir /usr/lib/modprobe.d %_systemdgeneratordir /usr/lib/systemd/system-generators %_systemdusergeneratordir /usr/lib/systemd/user-generators %_systemd_system_env_generator_dir /usr/lib/systemd/system-environment-generators %_systemd_user_env_generator_dir /usr/lib/systemd/user-environment-generators # Because we had one release with a typo... # This is temporary (Remove after systemd 240 is released) %_environmnentdir %{warn:Use %%_environmentdir instead}%_environmentdir %systemd_requires \ Requires(post): systemd \ Requires(preun): systemd \ Requires(postun): systemd \ %{nil} %systemd_ordering \ OrderWithRequires(post): systemd \ OrderWithRequires(preun): systemd \ OrderWithRequires(postun): systemd \ %{nil} %__systemd_someargs_0(:) %{error:The %%%1 macro requires some arguments} %__systemd_twoargs_2() %{nil} %systemd_post() \ %{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_post}} \ if [ $1 -eq 1 ] && [ -x "/usr/lib/systemd/systemd-update-helper" ]; then \ # Initial installation \ /usr/lib/systemd/systemd-update-helper install-system-units %{?} \|\| : \ fi \ %{nil} %systemd_user_post() \ %{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_user_post}} \ if [ $1 -eq 1 ] && [ -x "/usr/lib/systemd/systemd-update-helper" ]; then \ # Initial installation \ /usr/lib/systemd/systemd-update-helper install-user-units %{?} \|\| : \ fi \ %{nil} %systemd_preun() \ %{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_preun}} \ if [ $1 -eq 0 ] && [ -x "/usr/lib/systemd/systemd-update-helper" ]; then \ # Package removal, not upgrade \ /usr/lib/systemd/systemd-update-helper remove-system-units %{?} \|\| : \ fi \ %{nil} %systemd_user_preun() \ %{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_user_preun}} \ if [ $1 -eq 0 ] && [ -x "/usr/lib/systemd/systemd-update-helper" ]; then \ # Package removal, not upgrade \ /usr/lib/systemd/systemd-update-helper remove-user-units %{?} \|\| : \ fi \ %{nil} %systemd_postun() \ %{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_postun}} \ %{nil} %systemd_user_postun() \ %{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_user_postun}} \ %{nil} %systemd_postun_with_restart() \ %{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_postun_with_restart}} \ if [ $1 -ge 1 ] && [ -x "/usr/lib/systemd/systemd-update-helper" ]; then \ # Package upgrade, not uninstall \ /usr/lib/systemd/systemd-update-helper mark-restart-system-units %{?} \|\| : \ fi \ %{nil} %systemd_user_postun_with_restart() \ %{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_user_postun_with_restart}} \ if [ $1 -ge 1 ] && [ -x "/usr/lib/systemd/systemd-update-helper" ]; then \ # Package upgrade, not uninstall \ /usr/lib/systemd/systemd-update-helper mark-restart-user-units %{?} \|\| : \ fi \ %{nil} %systemd_postun_with_reload() \ %{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_postun_with_reload}} \ if [ $1 -ge 1 ] && [ -x "/usr/lib/systemd/systemd-update-helper" ]; then \ # Package upgrade, not uninstall \ /usr/lib/systemd/systemd-update-helper mark-reload-system-units %{?} \|\| : \ fi \ %{nil} %systemd_user_postun_with_reload() \ %{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# systemd_user_postun_with_reload}} \ if [ $1 -ge 1 ] && [ -x "/usr/lib/systemd/systemd-update-helper" ]; then \ # Package upgrade, not uninstall \ /usr/lib/systemd/systemd-update-helper mark-reload-user-units %{?} \|\| : \ fi \ %{nil} %systemd_user_daemon_reexec() \ if [ $1 -ge 1 ] && [ -x "/usr/lib/systemd/systemd-update-helper" ]; then \ # Package upgrade, not uninstall \ /usr/lib/systemd/systemd-update-helper user-reexec \|\| : \ fi \ %{nil} %udev_hwdb_update() %{nil} %udev_rules_update() %{nil} %journal_catalog_update() %{nil} # Deprecated. Use %tmpfiles_create_package instead %tmpfiles_create() \ %{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# tmpfiles_create}} \ command -v systemd-tmpfiles >/dev/null && systemd-tmpfiles --create %{?} \|\| : \ %{nil} # Deprecated. Use %sysusers_create_package instead %sysusers_create() \ %{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# sysusers_create}} \ command -v systemd-sysusers >/dev/null && systemd-sysusers %{?} \|\| : \ %{nil} %sysusers_create_inline() \ command -v systemd-sysusers >/dev/null && systemd-sysusers - <<SYSTEMD_INLINE_EOF \|\| : \ %{?} \ SYSTEMD_INLINE_EOF\ %{nil} # This should be used by package installation scripts which require users or # groups to be present before the files installed by the package are present on # disk (for example because some files are owned by those users or groups). # # Example: # Source1: %{name}-sysusers.conf # ... # %install # install -D %SOURCE1 %{buildroot}%{_sysusersdir}/%{name}.conf # %pre # %sysusers_create_package %{name} %SOURCE1 # %files # %{_sysusersdir}/%{name}.conf %sysusers_create_package() \ %{expand:%%{?!__systemd_twoargs_%#:%%{error:The %%%%sysusers_create_package macro requires two arguments}}} \ systemd-sysusers --replace=%_sysusersdir/%1.conf - <<SYSTEMD_INLINE_EOF \|\| : \ %(cat %2) \ SYSTEMD_INLINE_EOF\ %{nil} # This may be used by package installation scripts to create files according to # their tmpfiles configuration from a package installation script, even before # the files of that package are installed on disk. # # Example: # Source1: %{name}-tmpfiles.conf # ... # %install # install -D %SOURCE1 %{buildroot}%{_tmpfilesdir}/%{name}.conf # %pre # %tmpfiles_create_package %{name} %SOURCE1 # %files # %{_tmpfilesdir}/%{name}.conf %tmpfiles_create_package() \ %{expand:%%{?!__systemd_twoargs_%#:%%{error:The %%%%tmpfiles_create_package macro requires two arguments}}} \ systemd-tmpfiles --replace=%_tmpfilesdir/%1.conf --create - <<SYSTEMD_INLINE_EOF \|\| : \ %(cat %2) \ SYSTEMD_INLINE_EOF\ %{nil} %sysctl_apply() \ %{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# sysctl_apply}} \ [ -x /usr/lib/systemd/systemd-sysctl ] && /usr/lib/systemd/systemd-sysctl %{?} \|\| : \ %{nil} %binfmt_apply() \ %{expand:%%{?__systemd_someargs_%#:%%__systemd_someargs_%# binfmt_apply}} \ [ -x /usr/lib/systemd/systemd-binfmt ] && /usr/lib/systemd/systemd-binfmt %{?} \|\| : \ %{nil}	6.92 KB	2025-12-04 08:26
📄 macros.sysusers # RPM macros for packages creating system accounts # # Turn a sysusers.d file into macros specified by # https://docs.fedoraproject.org/en-US/packaging-guidelines/UsersAndGroups/#_dynamic_allocation %sysusers_requires_compat Requires(pre): shadow-utils %sysusers_create_compat() \ %(%{_rpmconfigdir}/sysusers.generate-pre.sh %{?*}) \ %{nil}	343 B	2025-12-04 08:30
📄 macros.valgrind-srpm # valgrind_arches lists what arches Valgrind works on %valgrind_arches %{ix86} x86_64 ppc ppc64 ppc64le s390x armv7hl aarch64	127 B	2025-10-30 10:48
📄 macros.vim %vimfiles_root %{_datadir}/vim/vimfiles	40 B	2025-11-11 21:10
📄 macros.vpath # ---- VPATH default settings # directory where CMakeLists.txt/meson.build/etc. are placed %_vpath_srcdir . # directory (doesn't need to exist) where all generated build files will be placed %_vpath_builddir %{_vendor}-%{_target_os}-build	241 B	2025-10-30 10:48

Edit File:

Terminal